Minka Group F840-CF User Manual
U.S. Patents: D579,097; D579,098; D579,103; D581,512; D583,044
This product is protected by United States Federal and/or State Law, including Patent, Trademark and/or Copyright laws.
Manual design and all elements of manual design are protected by U.S. Federal and/or State Law, including Patent, Trademark and/or Copyright laws.
SAFETY RULES
PACKAGE CONTENTS
INSTALLING THE FAN
HANGING THE FAN
ELECTRICAL CONNECTIONS
INSTALLING THE WALL TRANSMTTER
FINISHING THE INSTALLATION
1151W. Bradford Court, Corona,CA 92882 For Customer Assistance Call: 1-800-307-3267
BLADE AND LIGHT CAP INSTALLATION
1
INSTALLING THE LIGHT BULBS & GLASS SHADES
2
3
OPERATING THE REMOTE CONTROL/WALL CONTROL
4
CARE OF YOUR FAN
5
TROUBLESHOOTING
6
SPECIFICATIONS
7
10
11
12
13
CONTENTS
8
9
ATTENTION: The Energy Policy Act of 2005 requires this fan to be equipped with a 190 watt limiting device. If lamping exceeds 190 watts, the ceiling
fan’s light kit will shut off automatically.
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution and care are factors which can not be built into this product. These factors must be
supplied by the person(s) installing caring for and operating the unit.
NOTE: READ AND SAVE ALL INSTRUCTIONS!
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR OTHER PERSONAL INJURY, MOUNT FAN ONLY TO A U.L LISTED OUTLET BOX OR SUPPORTING
SYSTEM MARKED ACCEPTABLE FOR FAN SUPPORT AND USE MOUNTING SCREWS PROVIDED WITH THE OUTLET BOX IN CONJUCTION WITH THE
LOCK WASHERS PROVIDED WITH THE FAN. MOST OUTLET BOXS COMMONLY USED FOR FAN SUPPORT OF LIGHTING FIXTURES ARE NOT
ACCEPTABLE FOR FAN SUPPORT AND NEED TO BE REPLACED. CONSULT A QUALIFIED ELECTRICIAN IF IN DOUBT.
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE HOLDER WHILE INSTALLING, BALANCING THE BLADES OR CLEANING THE
FAN. DO NOT INSERT FOREIGN OBJECTS BETWEEN ROTATING FAN BLADES.
TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, THIS FAN ONLY CAN USE UC7067RY SOLID-STATE SPEED CONTROL WITH UC9040T WALL
CONTROL ONLY.
WARNING
2
1. Fan blades (5)
2. Mounting bracket
3. Canopy
4a. Standard downrod assembly
4b. Minimum-length downrod (for close
to ceiling mounting only)
5. Coupling cover
6. Glass shades (3)
7. Motor assembly (1)
8. Blade holders (5)
9. Light cap
10. Light kit assembly (1)
11. Receiver with 6 wire nuts
12a.Wall transmitter Incl,2 Mounting
Screws and 3 Wire Nuts.
PACKAGE CONTENTS
Unpack your fan and check the contents.
You should have the following items:
12b.Wall Plate w/2 Mounting screws
13. Extra wall plate
14. Bulbs (3)
15. Balancing Kit
A. Mounting Hardware:
#8-32
#8
Flat washers (2 pcs)
Wire nuts (4 pcs)
B. Blade Attachment Hardware:
S.S Washers (16 pcs)
C. Bracket Holder Hardware:
1/4”
D. Downrod rubber cover
E. Finial
X3/4” Machine scews (2 pcs)
1
X 1 ” Wood screws (2 pcs)
2
#8-32X8 Screws (16 pcs)
X 1/2” Screws with lock washers (11 pcs)
15
Loading...