MINICLOCKPRO 720P
SKU: MCC720p
THANK YOU FOR PURCHASING THE MINICLOCKPRO 720P
Please read this manual before operating the MiniClockPro 720p and
keep it handy.
This model is lightweight and about the size of a Smartphone, making
it perfect for pocket or suitcase travel. You can record 10 hours of
clear 1280*720 resolution video using either the continuous video
recording mode or the motion detection mode. In addition to this
great new camera, there will be no indicator light during any of the
recording modes, so can never draw undue attention.
The camera is even capable of a 120º viewing range so it can follow
the movements of anyone who walks through the room. When it
comes to storing all this vital footage, the mini clock travel portable
720p supports MicroSD card storage ranging from 2GB – 32GB. Not
only is this a covert camera, but it is also a functional clock with a
display that shows the current time, date, and day of the week all at
once. Pressing the top button will audibly tell you the time as well as
the temperature.
Remote control operation
Motion detection
Record while charging on included AC adapter
No indicator light while in record mode
Your purchase should include:
1 x Mini Clock Travel Portable High Definition
1 x Remote Control
1 x Charging AC adapter
1 x USB Cable
1 x Instruction Booklet
GET FAMILIAR WITH YOUR MINICLOCKPRO 720P
Talk Button
Display
MicroSD
Card Slot
USB Port
On/Off
Switch
USB Port
Power Button
Motion Detection
Button
Record Button
Photo
Button
Audio
Button
Clock Function
Buttons
Indicator
Light
Camera
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before
using.
To c ha rge your device , pl ug the charging c ab le into the
po we r input on the ri gh t-hand side on th e ba ck of the
de vi ce .
Wh il e charging, the r ed i ndicator light wi ll be on.
SETTING THE TIME AND DATE
TIP: Press the Up button on the back of the device to switch between
civilian and military time.
HOW TO SET THE TIME
1. Push the SET button on the back of the device. The hour
should be blinking.
2. Push the UP or DOWN button until the LCD display reads the
current hour.
3. Push the SET button again. The minutes should be blinking.
4. Push the UP or DOWN button until the LCD display reads the
current minute.
HOW TO SET THE DATE
5. Push the SET button again. “2010” should be blinking on the
LCD display.
6. Push the UP button on the back of the device until the LCD
display reads the current year.
7. Second, you will set the month and day.
HOW TO SET THE CURRENT DAY
1. Push the SET button again. There should be a “1” blinking on
the left side of the LCD display. This is the month.
2. Push the UP or DOWN button until the number on the left side
reads the current month.
3. Push the SET button again. There should be a “1” blinking on
the right side of the LCD display. This is the day.
4. Push the UP or DOWN button until the number on the right
side reads the current day.
5. Press the set button again.
HOW TO SET THE ALARM
1. Push the MODE button on the back of the device.
A bell icon will appear
2. Push the SET button on the back of the device.
The hour should be blinking
3. Push the UP or DOWN button to set the hour for which you
want the alarm to sound.
4. Push the SET button again.
The minutes should be blinking.
5. Push the UP or DOWN button to set the minute for which you
want the alarm to sound.
6. Push the SET button again. The LCD display should read with a
“01.”
7. This is the snooze.
8. Snooze can last from
1 – 60 minutes.
9. Push the UP or DOWN button to set the snooze time.
10. Push the SET button again. The LCD display should read with a
“1.”
11. This is the alarm ring.
12. There are 6 rings from which to choose
13. Rings 1 – 5 are nature sounds.
14. Ring 6 is a repetitive buzz.
15.
Push the MODE button on the back of the device to exit the
alarm.
NO TI CE : You have on ly s et the alarm with t hese steps.
HOW TO TURN THE ALARM ON
1. Push the MODE button on the back of the device.
2. Push the UP button on the back of the device.
The alarm icon located next to the date on the display
screen should be on.
3. Push the MODE button to exit the alarm.
4. Repeat steps 1 – 4 to turn the alarm off.
5.
To stop the alarm after it sounds, press the button on top of the
device.
OPERATING THE MINICLOCKPRO 720P
PREPARING THE DEVICE FOR USE
1. Be sure the small white switch— located beneath the plastic
battery panel and to the left of the power input — is switched
from OFF to ON.
2. Insert a MicroSD card into the slot located to the left of the on
/ off switch.
3. Make sure your mini clock travel has been fully charged.
4. Place the device where you want to record.
HOW TO TURN THE CAMERA ON
1. Push the POWER button on the remote.
The blue indicator light on the front of the mini clock
will turn on
TIP: If the blue indicator light flashes and then turns off there is no
MicroSD Card in the MicroSD Card slot.
HOW TO VIDEO RECORD
1. Push the RECORD button on the remote.
2. The blue indicator light will flash 3 times before turning off.
The camera is now recording live video.
3. Push the RECORD button on the remote to stop live video
recording.
The blue indicator light will turn on.
HOW TO TAKE PHOTOS
1. Push the PHOTO button on the remote.
The blue indicator light will blink once.
Your photo has been saved.
HOW TO USE MOTION DETECTION
1. Push the MOTION DETECTION button on the remote.
The blue indicator light will stay on until the camera
detects motion.
Once motion is detected, the blue indicator light will
blink and turn off, which means the camera is
recording.
2. Push the MOTION DETECTION button on the remote again to
turn off the motion detection recording.
The blue indicator light will turn on.
HOW TO RECORD AUDIO
1. Press the AUDIO Button
The blue indicator light will blink twice and then turn
off
Your audio is being recorded
2. Press the AUDIO button on the remote again to turn off the
audio recording
The blue indicator light will turn on
HOW TO TURN THE CAMERA OFF
1. Push the POWER button on the remote until the blue indicator
light on the back of the mini clock turns off.
RETRIEVE THE FILES TO YOUR PC
1. Plug the device into your PC using the USB cable
2. Push the POWER Button on the remote.
The blue indicator light will turn on
3. Locate “Removable Disk” inside the (My) Computer folder
AutoPlay Removable Disk > Open folder to view files
Or…
Go to Start > Computer > Removable Disk
4. Open the Removable Disk drive
5. Open the DCIM folder
6. Double click the file you want to view
VLC Player is recommended for watching videos
TROUBLESHOOTING
THE DEVICE WON’T TURN ON
Charge the device for at least 4 hours before the first use
Make sure the charging cable is securely inserted into the
device and into the power source
THE DEVICE ISN’T CHARGING
Replace the battery or charging cable
If you are charging via a wall power source, you may need to
charge via your PC. The AC adapter might be bad
THE DEVICE HAS CRASHED
You need to reset the device
MY COMPUTER DOESN’T RECOGNIZE THE DEVICE
Unplug the device from your PC and reboot the device
Unplug the device from your PC and reboot your PC
Try using a different USB slot on your PC
Replace the USB cable
THE SOUND OR VIDEO IS UNCLEAR
The device needs charging
SPECIFICATIONS
Video Resolution
1280x720
Video Format
AVI
Frames per Second
30
Vision Angle
120
Motion Detection
Yes
Water Resistant
No
Battery Life
10 hours
Type of Memory
MicroSD Card
Memory Capacity
32GB
Recording Capacity 2GB ≈ 1 hour
4GB ≈ 2 hours
8GB ≈ 4 hours
16GB ≈ 8 hours
32GB ≈ 16 hours
USB Interface
2.0 USB
Player Software
VLC recommended
Operating Systems Windows 2000
Windows Me
Windows XP
Windows Vista
Windows 7
Windows 8
Mac OSX
Linux
Loading...