OPERATING THE MP3 PLAYER HIDDEN CAMERA
IMPORTANT NOTICE: Allow the device to charge 4 – 6 hours before
using.
HOW TO CHARGE THE MP3 PLAYER
1. Plug the USB cable into the USB jack on the MP3 player
2. Plug the USB cable into your PC
• The indicator light will blink yellow while charging
• The indicator light will stay solid when fully charged
HOW TO TURN ON / OFF THE MP3 PLAYER
1. Insert a MicroSD card into the slot
2. Push and hold the Power button
• The yellow indicator light will turn on
• The MP3 player is now in standby mode
3. Push and hold the Power button
• The yellow indicator light will turn off
HOW TO PLAY MUSIC
1. Push the Play button to play your personal music files
• The blue indicator light will blink slowly
2. Push the Play button to pause the music
• The blue indicator light will turn solid
3. Push the Play button to un-pause the music
• The blue indicator light will blink slowly
4. Push and hold the Fast Forward button to fast forward
through a song
5. Push the Next Song button to skip to the next song
6. Push and hold the Rewind button to rewind through a song
7. Push the Previous Song button to skip to the previous song
8. Push and hold the Play button to stop the music
• The indicator light will turn yellow
• The MP3 player is back in standby mode
HOW TO RECORD VIDEO
1. Put the MP3 player into standby mode
2. Push the Video button
• The yellow indicator light will blink while recording
3. Push the Video button
• The yellow indicator light will turn solid and stop
recording
HOW TO TAKE PHOTOGRAPHS
1. Put the MP3 player into standby mode
2. Push the Photo button
a. The yellow indicator light will blink once
HOW TO RESET THE TIME AND DATE STAMP (Windows Only)
1. Connect the device to your PC using the USB Cable
2. Go to http://mgidownloads.com/Software/
3. Click on "MP3_Time_Stamp_Software.zip"
4. Go to Start > Computer > Downloads
5. Right click MP3 Time Stamp Software zip file and select
“Extract all”
6. Open the newly extracted folder
7. Open “MP3 Time Stamp Software
8. Click “updatatime”
9. Click “Run”