User
Manual
Wireless
InsPection
Camera
with
Color
LCD
Monitor
w
Version
No.: 1.0
Please
read
this
user
Manual
carefully
before
using
this
product!
*
8802AJ
means
G88802(camera)
+
GB78o2(monitor)
WELCOME
Thanks
you
for
choosing our
inspection
video camera and color LCD
monitor.
Please read the
operation
guide
carefully
before using this
Droo ucr.
The
product
is
designed
as a remote
inspection device. It can be
used to look
into
tight
spots and beam back
real-time video to monitor.
Typical applications
might include HVAC inspection,
automotive
inspection,
cable routing, automotive/boat/aircraft
inspection,
etc.
PACKING
LIST
r
\*/
| | Mini camera
wiih
I
IHandholdcripxl J
I
rmtuOext
I
w
l-.--_]
l"l
I
Accessory
I
I
Mirrorxl
I
_r-
STRUCTURE
Power
Indicator
.Signal
Flexible
Tube
Camera.
ANd LEDS
,Power
Indicator
"LCD
ON/OFF
.Power
ON/OFF
.Image
Orientation
-
Brig htness
"Contrast
Power SuoDlv
Socket
Signal
InPUt
''.
Video Output
-2-
INSTALLATION
Please
install the batteries. tube
first before
using the
product,
and
choose the accessory
according
to actual situation.
Steps of
installation as
following'
1.
To Install Batteries
1-1. Using
a screwdriver,
remove
screw and cover.
1-2.
Remove battery compartment
and insert
four new AA batteries
into
the
proper
slots in the battery
compartment.
Proper battery
orientation
is indicated on
the batterv compartment.
!!"ru-!!
1-3.
Reinstall battery compartment
and
battery cover
and screw as
before.
IIEEI
O.V
your
hands
before
installation or
replacing batteries.
-3-
2.
To Install
The
Camera
With
Flexible
Tube
Connect
the
camera with
tube
to the
body, make
sure the
keyed
ends
are
properly
aligned.
Once they
are aligned,
finger
tighten
the knurled
knob
to hold
the connection
in
Dlace.
3. To
Install
Accessory
The three
included
accessories,
{mirror,
hook
and
magnet)
all attached
to
the imager
head
the same
way.
To
connect,
hold
the imager
head,
Slip the end
of the
accessory
over
the flats
of
the imager
head.
finqer
tiqhten
the
linurle?
knob
MONITOR
POWER SUPPLY
Plug the
connect cable
into
power
socket
of
monitor, and
plug
the
end
of connect
cable into adapter,
then
connect
the adapter
to 8V-36V
power,
the
power
indicator
will lights
on
red, which
indicates being
charging.
6qn ffid
1.2'V
o-Nlll)rcJ
\<=J
W=4-
The
built-in
Li-battery
will be charged
after the adapter
is
plugged
in, and the
Red indicator
lights up
during
charging
and
will turn off
after
a
full charge.
A full
charge
can
power
the
monitor
for about
5
hours continuously'
lf,
Wnen
charging,
the monitor
will be available,
-5-
GENERAL
SAFETY
INFORMATION
WARNING!
Read and understand
all instructions.Failure
to follow all
instructions
listed
below may
result in electric
shock, fire
and/or serious
Personal
injurY.
SAVE THESE
INSTRUCTIONS!
Prevent object
and liquid
entry.
Never spill
liquid of any kind on
the
video display unit.
Liquid
increases the
risk of electrical
shock
and
damage to the
product
The unit
is not shock-resistant.
Do not use
it
as
a hammer or
droD
it.
Do not immerse
the camera
and
monitor in
water'
Store
in a
dry
place.
Such measures
reduce the risk of electric
shock and
da-
mage.
The imager head
and
the cable are water
resistant when
the
unit is fully assembled,
but
the monitor
and camera
is not.
Do
not
use
the camera
if
condensation
forms inside the
lens'
Let the
water evaporate
before using
again.
Operation
1.
Roll the ON/OFF switch
to
turn on the camera,
and the
power
indicator
will
lights,The switch then
acts
as a dimmer
for the twin LEDs that
sur-
round the camera
on the
imager head and
provide
lighting.
provide
lighting
-6-
)
Slide
the ON/OFF
switch to ON
position,
and
power
indicator
will lights
on
green,
the
picture
display
on LCD.
Adjust
brightness. contrat.
orientation,
and
rollthe ON/OFF switch
of
the camera for better
image
effect.
3. When
in use, the tube
should easily maneuver
itself into
position
going
forward.
lllfl
The flexible tube
can be
bent into a certain
shaDe.
This may help
you
explore
the tube
into narrow areas,
*
The camera/monitor
are
comDatible
with both
wired
and wireless.
4. The accessories
of Handhold
Inspection Camera
can be used
to
retrieve small
items like
dropped
rings or screws.
he switch act
as a dimmer
discretely
i nteg rative
-7-
SPECIFICATIONS
d
IU
=
(J
lvlode No.
G88802
Imaqino Sensor
Ct'4OS
Total Pixels 7Q4x576
(PAL);
ZrZ' 486(NTSC)
Horizontal View
Anqle
50 deqree
Transmission Frequencv
2468MHz
l.linimum Illumination
0
Lux
Modulation
Type
FM
Bandwidth
18MHz
Power
SuoDlv
4xAA
Dimensions(Wx
D
x
H)
186x145'41(mm)
(Exclude
Flexible Tube)
Weiqht(about)
530q
E
F
z
E
lYode No.
G87802
LCD Screen
Tvpe
Fffective Pir
480
x
240
Video
Svstem
PAL/NTSC
I ransmission Frequency
2468MHz
Exterior
Supply Voltaqe
Lurrent
(
tvtdx.
450mA
vroeo
uutput Level
U.9- 1.3V,_"@ /5ohm
tuux./uxJU(mm)
weight(Aboul
r40
Operating Temperature
10'C- +50"C/+ 1
4'C- +!22o
Operating Humidity(Max.)
15
-85o/o
RH
x
Actual transmission
range may
vary according
to the weathe[
location, i
nterference a nd bu i ld i n g construction.
x
All the specifications
are subject
to minor change
without
prior
notice.
-B-
a
a
a
a
a
a
a
The apparatus shall not be
exposed to dripping or splashing and
that
no objects
filled with liquids, such as vases,
shall
be
placed
on the
apparatus.
Turn off the Camera/Monitor
if
the system
is not
in use.
The adapter is used as the disconnect
device from the mains. The ad-
apter shall
remain readily operable.
The Camera/Monitor can only be completely
disconnected
from the
mains by unplug
the
adapter.
Do not cut the DC
power
cable ofthe
apparatus to
fit with
another
DOWer SOUrce.
Attention should
be
drawn
to the environment aspects
of
battery
disp-
osa t.
Remove the batteries when cleaning
the unit.
Remove the
batteries before storing the
unit for a long time.
When necessary,
REPLACE ALL FOUR BATTERIES
in this unit with new
ones.
Use only the
size and type of battery specified.
Be sure to install the battery
with the correct
polarity
as indicated in the
battery compartment.
Properly dispose of the battery.
Exposure
to high
temperatures
can
cause the
battery to explode, so do
not dispose of in a fire. Place
tape
over
the
terminals to
prevent
direct
contact with other objects. Some
countries have
regulations concerning battery disposal.
Please follow
all applicable regulations.
The
graphics
included are subject to
minor change without
notice.
-9-
This device
complies
with
part
15 of
the
FCC
Rules'
Operation
is
subject
to
the
following
two
conditions:
(1)
this
device
may
not cause
harmful
interference,
(2)
this
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
operation'
Changes
or
modifications
not
expressly
approved
by
the
party
responsible
for
compliance
could
void
the user's
authority
to
operate
the
equiPment.
EU
Environmental
Protection
Waste
electrical
products should
not be
disposed
of
with
household
waste.
Please
recycle
where
facilities
exist.
Check
with
your
Local
AuthoritY
or
retailer
for
recycling
advice'
X
I
Loading...