Page 1
LINK:
CONTENT & A-Z
OWNER'S MANUAL.
MINI CONVERTIBLE.
Online Edition for Part no. 01402667273 - VI/19
Page 2
Online Edition for Part no. 01402667273 - VI/19
Page 3
WELCOME TO MINI.
OWNER'S MANUAL.
MINI CONVERTIBLE.
Thank you for choosing a MINI.
The more familiar you are with your vehicle, the better control you will have
on the road. We therefore strongly suggest:
Read this Owner's Manual before starting off in your new MINI. It contains
important information on vehicle operation that will help you make full use of
the technical features available in your MINI. The manual also contains
information designed to enhance operating reliability and road safety, and to
contribute to maintaining the value of your MINI.
Any updates made after the editorial deadline can be found in the appendix of
the printed Owner's Manual for the vehicle.
Get started now. We wish you driving fun and inspiration with your MINI.
Online Edition for Part no. 01402667273 - VI/19
3
Page 4
TABLE OF CONTENTS
NOTES
Information............................................................................................................................10
QUICK REFERENCE
Entering..................................................................................................................................20
Set-up and use.......................................................................................................................24
On the road............................................................................................................................ 27
AT A GLANCE
Cockpit.................................................................................................................................... 38
Central Information Display (CID)..................................................................................42
General settings...................................................................................................................47
Owner's Manual media.......................................................................................................56
CONTROLS
Opening and closing........................................................................................................... 60
Seats, mirrors, and steering wheel.................................................................................80
Transporting children safely............................................................................................90
Driving.................................................................................................................................... 94
Displays................................................................................................................................118
Lights.................................................................................................................................... 135
Safety.....................................................................................................................................141
Driving stability control systems.................................................................................162
Driving comfort................................................................................................................. 167
Climate control...................................................................................................................187
Interior equipment............................................................................................................196
Storage compartments.....................................................................................................204
Cargo area............................................................................................................................207
4
Online Edition for Part no. 01402667273 - VI/19
Page 5
DRIVING TIPS
Things to remember when driving..............................................................................214
Saving fuel...........................................................................................................................219
ENTERTAINMENT
General information......................................................................................................... 228
Tone.......................................................................................................................................230
Radio..................................................................................................................................... 232
Audio.....................................................................................................................................240
COMMUNICATION
Telephone............................................................................................................................ 246
MINI Connected................................................................................................................ 250
MOBILITY
Refueling..............................................................................................................................256
Fuel........................................................................................................................................258
Wheels and tires................................................................................................................260
Engine compartment........................................................................................................281
Engine oil.............................................................................................................................284
Coolant..................................................................................................................................288
Maintenance....................................................................................................................... 290
Replacing components.................................................................................................... 292
Breakdown assistance..................................................................................................... 301
Care........................................................................................................................................309
REFERENCE
Technical data.................................................................................................................... 316
Appendix..............................................................................................................................319
License Texts and Certifications..................................................................................320
Everything from A to Z....................................................................................................328
Online Edition for Part no. 01402667273 - VI/19
5
Page 6
© 2019 Bayerische Motoren Werke
Aktiengesellschaft
Munich, Germany
Reprinting, including excerpts, only with the written consent of BMW AG, Munich.
US English ID5 VI/19, 07 19 490
Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.
6
Online Edition for Part no. 01402667273 - VI/19
Page 7
Online Edition for Part no. 01402667273 - VI/19
7
Page 8
8
Online Edition for Part no. 01402667273 - VI/19
Page 9
NOTES
Information ................................................................................................ 10
Online Edition for Part no. 01402667273 - VI/19
9
Page 10
NOTES Information
Information
Using this Owner's Manual
Orientation
The fastest way to find information on a
particular topic is by using the index.
An initial overview of the vehicle is provided in the first chapter.
Updates made after the editorial
deadline
Due to updates after the editorial deadline,
differences may exist between the printed
Owner's Manual and the Integrated Owner's
Manual in the vehicle.
Notes on updates can be found in the appendix of the printed Owner's Manual for
the vehicle.
Additional sources of information
Service center
A service center will be glad to answer
questions at any time.
Internet
Vehicle information and general information on MINI, e.g., on technology, are available on the Internet: www.mini.jp.
Vehicle information and general information on MINI, e.g., on technology, are available on the Internet: www.miniusa.com.
MINI Motorer’s Guide app
The Owner's Manual is available in many
countries as an app for iOS or Android in
the respective Store.
MINI Driver’s Guide Web
Driver’s Guide Web shows the most suitable information for the selected vehicle. If
possible, only equipment and functions that
are actually installed in the vehicle will be
explained. Driver’s Guide Web can be displayed in any current browser.
Symbols and displays
Symbols in the Owner's Manual
Symbol
Measures that can be taken to
"..." Control Display texts used to
Action steps
Action steps to be carried out are presented
as a numbered list. The steps must be carried out in the defined order.
1. First action step.
2. Second action step.
Enumerations
Enumerations without mandatory order or
alternative possibilities are presented as a
list with bullet points.
– First possibility.
Meaning
Precautions that must be
followed in order to avoid the
possibility of injury to yourself
and to others as well as serious
damage to the vehicle.
help protect the environment.
select individual functions.
10
Online Edition for Part no. 01402667273 - VI/19
Page 11
Information NOTES
– Second possibility.
Symbols on vehicle components
This symbol on a vehicle component
indicates that further information on the
component is available in the Owner's
Manual.
Vehicle features and options
This Owner's Manual describes all models
and all standard, country-specific and optional equipment that is offered in the
model series. Therefore, this Owner's
Manual also describes and illustrates features and functions that are not available in
a vehicle, for example because of the selected optional features or the country-specific version.
This also applies to safety-related functions
and systems.
When using these functions and systems,
the applicable laws and regulations must be
observed.
For any options and equipment not described in this Owner's Manual, refer to the
Supplementary Owner's Manuals.
Your dealer’s service center is happy to answer any questions that you may have
about the features and options applicable to
your vehicle.
tures described in this Owner's Manual may
differ from those in your vehicle.
Updates made after the editorial
deadline
Due to updates after the editorial deadline,
differences may exist between the printed
Owner's Manual and the Integrated Owner's
Manual in the vehicle.
Notes on updates can be found in the appendix of the printed Owner's Manual for
the vehicle.
For Your Own Safety
Manufacturer
The manufacturer of this MINI is Bayerische Motoren Werke Aktionengesellschaft,
BMW AG.
Intended use
Heed the following when using the vehicle:
– Owner's Manual.
– Information on the vehicle. Do not re-
move stickers.
– Technical vehicle data.
– The traffic, speed, and safety laws where
the vehicle is driven.
– Vehicle documents and statutory docu-
ments.
Status of the Owner's Manual
Basic information
The manufacturer of your vehicle pursues a
policy of constant development that is conceived to ensure that our vehicles continue
to embody the highest quality and safety
standards. In rare cases, therefore, the fea-
Online Edition for Part no. 01402667273 - VI/19
Warranty
Your vehicle is technically configured for
the operating conditions and registration
requirements applying in the country of
first delivery, also known as homologation.
If your vehicle is to be operated in a different country it might be necessary to adapt
your vehicle to potentially differing operating conditions and registration requirements. If your vehicle does not comply with
11
Page 12
NOTES Information
the homologation requirements in a certain
country you may not be able to lodge warranty claims for your vehicle there. Further
information on warranty is available from a
service center.
Maintenance and repairs
Advanced technology, for instance the use
of modern materials and high-performance
electronics, requires suitable maintenance
and repair work.
The manufacturer of your vehicle recommends that you entrust corresponding procedures to a MINI dealer’s service center. If
you choose to use another service facility,
the manufacturer of your vehicle recommends use of a facility that performs work,
e.g., maintenance and repair, according to
MINI specifications with properly trained
personnel, referred to in the Owner's
Manual as "another qualified service center
or repair shop".
If work is performed improperly, for instance maintenance and repair, there is a
risk of subsequent damage and related
safety risks.
Improperly performed work on the vehicle
paint can lead to a failure or malfunction of
components, e.g., the radar sensors, and
thereby result in a safety risk.
Parts and accessories
The manufacturer of your vehicle recommends the use of parts and accessory products approved by the manufacturer of the
MINI.
Approved parts and accessories, and advice
on their use and installation are available
from a MINI dealer's service center.
MINI parts and accessories were tested by
the manufacturer of the MINI for their
safety and suitability in MINI vehicles.
The manufacturer of your vehicle warrants
genuine MINI parts and accessories.
The manufacturer of your vehicle does not
evaluate whether each individual product
from another manufacturer can be used
with MINI vehicles without presenting a
safety hazard, even if a country-specific official approval was issued. The manufacturer of your vehicle does not evaluate
whether these products are suitable for
MINI vehicles under all usage conditions.
California Proposition 65 Warning
For vehicles sold in California, the law requires vehicle manufacturers to provide the
following warning:
Warning
Engine exhaust and a wide variety of Automobile components and parts, including
components found in the interior furnishings in a vehicle, contain or emit chemicals known to the State of California to
cause cancer and birth defects and reproductive harm. In addition, certain fluids
contained in vehicles and certain products
of component wear contain or emit chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm. Battery posts, terminals
and related accessories contain lead and
lead compounds. Batteries also contain
other chemicals known to the State of California to cause cancer. Wash your hands
after handling. Used engine oil contains
chemicals that have caused cancer in laboratory animals. Always protect your skin
by washing thoroughly with soap and water. For more information go to
www.P65Warnings.ca.gov/passenger-vehicle.
12
Online Edition for Part no. 01402667273 - VI/19
Page 13
Warning
Operating, servicing and maintaining a
passenger vehicle or off-highway motor
vehicle can expose you to chemicals including engine exhaust, carbon monoxide,
phthalates, and lead, which are known to
the State of California to cause cancer and
birth defects or other reproductive harm.
To minimize exposure, avoid breathing exhaust, do not idle the engine except as
necessary, service your vehicle in a wellventilated area and wear gloves or wash
your hands frequently when servicing
your vehicle. For more information go to
www.P65Warnings.ca.gov/passenger-vehicle.
Service and warranty
We recommend that you read this publication thoroughly. Your vehicle is covered by
the following warranties:
– New Vehicle Limited Warranty.
– Rust Perforation Limited Warranty.
– Federal Emissions System Defect War-
ranty.
– Federal Emissions Performance War-
ranty.
– California Emission Control System Lim-
ited Warranty.
Detailed information about these warranties
is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models.
Your vehicle has been specifically adapted
and designed to meet the particular operating conditions and homologation requirements in your country and continental region in order to deliver the full driving
pleasure while the vehicle is operated under
those conditions. If you wish to operate
your vehicle in another country or region,
Information NOTES
you may be required to adapt your vehicle
to meet different prevailing operating conditions and homologation requirements.
You should also be aware of any applicable
warranty limitations or exclusions for such
country or region. In such case, please contact Customer Relations for further information.
Maintenance
Maintain the vehicle regularly to sustain
the road safety, operational reliability and
the New Vehicle Limited Warranty.
Specifications for required maintenance
measures:
– MINI Maintenance system.
– Service and Warranty Information Book-
let for US models.
– Warranty and Service Guide Booklet for
Canadian models.
If the vehicle is not maintained according to
these specifications, this could result in
damaging the vehicle. Such damage is not
covered by the MINI New Vehicle Limited
Warranty.
Data memory
General information
Electronic control devices are installed in
the vehicle. Electronic control units process
data they receive from vehicle sensors, selfgenerate or exchange with each other. Some
control units are necessary for the vehicle
to function safely or provide assistance during driving, for instance driver assistance
systems. Furthermore, control units facilitate comfort or infotainment functions.
Information about stored or exchanged data
can be requested from the manufacturer of
the vehicle, in a separate booklet, for example.
Online Edition for Part no. 01402667273 - VI/19
13
Page 14
NOTES Information
Personal reference
Each vehicle is marked with a unique vehicle identification number. Depending on the
country, the vehicle owner can be identified
with the vehicle identification number, license plate and corresponding authorities.
In addition, there are other options to track
data collected in the vehicle to the driver or
vehicle owner, for instance via utilized
services.
Operating data in the vehicle
Control units process data to operate the vehicle.
For example, this includes:
– Status messages for the vehicle and its
individual components, e.g., wheel rotational speed, wheel speed, deceleration,
transverse acceleration, engaged safety
belt indicator.
– Ambient conditions, e.g., temperature,
rain sensor signals.
The processed data is only processed in the
vehicle itself and generally volatile. The
data is not stored beyond the operating period.
Electronic components, e.g. control units
and ignition keys, contain components for
storing technical information. Information
about the vehicle condition, component usage, maintenance requirements events or
faults can be stored temporarily or permanently.
This information generally records the state
of a component, a module, a system, or the
environment, for instance:
– Operating states of system components,
for instance, fill levels, tire inflation
pressure, battery status.
– Malfunctions and faults in important
system components, for instance lights
and brakes.
– Responses by the vehicle to special sit-
uations such as airbag deployment or
engagement of the driving stability control systems.
– Information on vehicle-damaging
events.
The data is required to perform the control
unit functions. Furthermore, it also serves
to recognize and correct malfunctions, and
helps the vehicle manufacturer to optimize
vehicle functions.
The majority of this data is volatile and is
only processed within the vehicle itself.
Only a small share of data is stored in event
or fault memories based on an event.
When servicing, for instance during repairs,
service processes, warranty cases, and quality assurance measures, this technical information can be read out from the vehicle together with the vehicle identification
number.
A dealer’s service center or another qualified service center or repair shop can read
out the information. The socket for OBD Onboard Diagnosis required by law in the vehicle is used to read out the data.
The data is collected, processed, and used
by the relevant organizations in the service
network. The data documents technical conditions of the vehicle, helps with the identification of the fault, compliance with warranty obligations and quality improvement.
Furthermore, the manufacturer has product
monitoring duties to meet in line with product liability law. To fulfill these duties, the
vehicle manufacturer needs technical data
from the vehicle. The data from the vehicle
can also be used to check customer claims
for warranty and guaranty.
Fault and event memories in the vehicle can
be reset when a dealer’s service center or
another qualified service center or repair
shop performs repair or servicing work.
14
Online Edition for Part no. 01402667273 - VI/19
Page 15
Information NOTES
Data entry and data transfer into
the vehicle
General information
Depending on the vehicle equipment, comfort and individual settings can be stored in
the vehicle and modified or reset at any
time.
For example, this includes:
– Settings for the seat and steering wheel
positions.
– Suspension and climate control settings.
If necessary, data can be transferred to the
entertainment and communication system
of the vehicle, for instance via smartphone.
This includes the following depending on
the respective equipment:
– Multimedia data such as music, films or
photos for playback in an integrated
multimedia system.
– Address book data for use in conjunc-
tion with an integrated hands-free sys-
tem or an integrated navigation system.
– Entered navigation destinations.
– Data on the use of Internet services.
This data can be stored locally in the vehicle
or is found on a device that has been connected to the vehicle, e.g., a smartphone,
USB stick or MP3 player. If this data is
stored in the vehicle, it can be deleted at
any time.
This data is only transmitted to third parties
upon personal request as part of the use of
online services. The transmission depends
on the selected settings for the use of the
services.
Incorporation of mobile devices
Depending on the vehicle equipment, mobile devices connected to the vehicle, for instance smartphones, can be controlled via
the vehicle control elements.
The sound and picture from the mobile device can be played back and displayed
through the multimedia system. Certain information is transferred to the mobile device at the same time. Depending on the
type of incorporation, this includes, for instance position data and other general vehicle information. This optimizes the way in
which selected apps, for instance navigation
or music playback, work.
There is no further interaction between the
mobile device and the vehicle, such as active access to vehicle data.
How the data will be processed further is
determined by the provider of the particular
app being used. The extent of the possible
settings depends on the respective app and
the operating system of the mobile device.
Services
General information
If the vehicle has a wireless network connection, this enables data to be exchanged
between the vehicle and other systems. The
wireless network connection is realized via
an in-vehicle transmitter and receiver unit
or via personal mobile devices brought into
the vehicle, for instance smartphones. This
wireless network connection enables 'online
functions' to be used. These include online
services and apps supplied by the vehicle
manufacturer or by other providers.
Services from the vehicle
manufacturer
Where online services from the vehicle
manufacturer are concerned, the corresponding functions are described in the appropriate place, for instance the Owner's
Manual or manufacturer's website. The relevant legal information pertaining to data
protection is provided there too. Personal
data may be used to perform online services. Data is exchanged over a secure con-
Online Edition for Part no. 01402667273 - VI/19
15
Page 16
NOTES Information
nection, for instance with the IT systems of
the vehicle manufacturer intended for this
purpose.
Any collection, processing, and use of personal data above and beyond that needed to
provide the services must always be based
on a legal permission, contractual arrangement or consent. It is also possible to activate or deactivate the data connection as a
whole. That is, with the exception of functions and services required by law such as
Assist systems.
Services from other providers
When using online services from other providers, these services are the responsibility
of the relevant provider and subject to their
data privacy conditions and terms of use.
The vehicle manufacturer has no influence
on the content exchanged during this process. Information on the way in which personal data is collected and used in relation
to services from third parties, the scope of
such data, and its purpose, can be obtained
from the relevant service provider.
– Whether or not the driver and passen-
ger safety belts were fastened.
– How far, if at all, the driver was depress-
ing the accelerator and/or brake pedal.
– How fast the vehicle was traveling.
This data can help provide a better understanding of the circumstances in which
crashes and injuries occur.
EDR data is recorded by your vehicle only if
a nontrivial crash situation occurs; no data
is recorded by the EDR under normal driving conditions and no personal data, for instance name, gender, age, and crash location, are recorded.
However, other parties, such as law enforcement, could combine the EDR data with the
type of personally identifying data routinely
acquired during a crash investigation.
To read data recorded by an EDR, special
equipment is required, and access to the vehicle or the EDR is needed. In addition to
the vehicle manufacturer, other parties,
such as law enforcement, that have the special equipment, can read the information if
they have access to the vehicle or the EDR.
Event Data Recorder EDR
This vehicle is equipped with an event data
recorder EDR. The main purpose of an EDR
is to record, in certain crash or near crashlike situations, such as an air bag deployment or hitting a road obstacle, data that
will assist in understanding how a vehicle’s
systems performed. The EDR is designed to
record data related to vehicle dynamics and
safety systems for a short period of time,
typically 30 seconds or less.
The EDR in this vehicle is designed to record such data as:
– How various systems in your vehicle
were operating.
16
Online Edition for Part no. 01402667273 - VI/19
Vehicle identification number
Engine compartment
The vehicle identification number can be
found in the engine compartment, on the
right-hand side of the vehicle.
Page 17
Information NOTES
Windshield
The vehicle identification number can also
be found behind the windshield.
Reporting safety defects
For US customers
The following only applies to vehicles
owned and operated in the US.
If you believe that your vehicle has a defect
which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety
Administration NHTSA, in addition to notifying MINI of North America, LLC, P.O. Box
1227, Westwood, New Jersey 07675-1227,
Telephone 1-800-831-1117.
If NHTSA receives similar complaints, it
may open an investigation, and if it finds
that a safety defect exists in a group of vehicles, it may order a recall and remedy
campaign.
However, NHTSA cannot become involved
in individual problems between you, your
dealer, or MINI of North America, LLC.
To contact NHTSA, you may call the Vehicle
Safety Hotline toll-free at 1-888-327-4236
(TTY: 1-800-424-9153); go to http://
www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW.,
Washington, DC 20590. You can also obtain
other information about motor vehicle
safety from http://www.safercar.gov
For Canadian customers
Canadian customers who wish to report a
safety-related defect to Transport Canada,
Defect Investigations and Recalls, may call
the toll-free hotline 1-800-333-0510. You
can also obtain other information about mo-
tor vehicle safety from http://www.tc.gc.ca/
roadsafety.
Online Edition for Part no. 01402667273 - VI/19
17
Page 18
18
Online Edition for Part no. 01402667273 - VI/19
Page 19
QUICK REFERENCE
Entering ...................................................................................................... 20
Set-up and use ........................................................................................... 24
On the road ................................................................................................. 27
Online Edition for Part no. 01402667273 - VI/19
19
Page 20
QUICK REFERENCE Entering
Entering
Opening and closing
Buttons on the vehicle key
1 Unlocking
2 Locking
3
Unlocking the trunk lid
4 Panic mode
Unlocking the vehicle
Press the button on the vehicle key.
Depending on the settings, either only the
driver's door or all vehicle access points are
unlocked.
If only the driver's door is unlocked, press
the button on the vehicle key again to unlock the other vehicle access points.
Press and hold the button on the vehicle key after unlocking.
Press the button on the vehicle key
again after the sliding sun roof
integrated into the convertible top
is fully opened. Press and hold the button
until the convertible top is fully opened and
locked.
Releasing the button or leaving the vicinity
of the vehicle stops the motion.
Locking the vehicle
Press the button on the vehicle key.
All vehicle access points are locked.
When the vehicle key is used near the vehi-
cle, it can be used to close the convertible
top and windows.
Hold down the button on the vehi-
cle key until closing is completed.
Releasing the button or leaving the vicinity
of the vehicle stops the motion.
Buttons for the central locking
system
Overview
The windows and the sliding sun roof
integrated into the convertible top are
opened, as long as the button on the vehicle
key is pressed.
With Comfort Access:
If close to the vehicle, the convertible top
can also be opened.
20
Online Edition for Part no. 01402667273 - VI/19
Buttons for the central locking system.
Page 21
Entering QUICK REFERENCE
Locking
Pressing the button locks the vehicle if the front doors are closed.
Unlocking
Pressing the button unlocks the vehicle.
Panic mode
You can trigger the alarm system if you find
yourself in a dangerous situation.
Press the button on the vehicle key
and hold for at least 3 seconds.
To switch off the alarm: press any button.
Comfort Access
Concept
The vehicle can be accessed without operating the vehicle key.
Carrying the vehicle key with you, e.g., in
your pants pocket, is sufficient.
The vehicle automatically detects the vehicle key when it is in close proximity or in
the car's interior.
Unlocking the vehicle
Locking the vehicle
On the driver's or front passenger's door
handle, press the button.
Trunk lid
Unlocking
– Unlock the vehicle and press the button
on the outside of the trunk lid.
– Press and hold the button on the
vehicle key for approx. 1 second.
Depending on the setting, the doors may be
unlocked.
On the driver's or front passenger's door
handle, press the button.
Online Edition for Part no. 01402667273 - VI/19
Closing
Close the trunk lid manually.
21
Page 22
QUICK REFERENCE Entering
Convertible top with integrated
sliding sun roof
Overview
Sliding sun roof
Press the switch backward,
until the desired position is
reached or the sliding sun roof
is fully open.
Press the switch forward, until
the desired position is reached
or the sliding sun roof is
closed.
Convertible top
Press the switch backward,
until the sliding sun roof is
open.
Press the switch backward
again. The windows are rolled
down, and the convertible top opens as
longs as the switch is pressed. After the
convertible top is completely open, the
switch can be held or pressed again briefly
in order to raise the windows.
Press and hold switch forward.
The windows are lowered, the
convertible top closes and the
windows are raised again as
long as the switch is pressed.
Displays and control elements
In the vicinity of the steering
wheel
1 Low beams, fog lights
2 High beams, headlight flasher, turn sig-
nal
3 Instrument cluster
4 Wiper system
Indicator/warning lights
Instrument cluster
The indicator/warning lights can light up in
a variety of combinations and colors.
Several of the lights are checked for proper
functioning and light up temporarily when
the engine is started or the ignition is
switched on.
22
Online Edition for Part no. 01402667273 - VI/19
Page 23
Entering QUICK REFERENCE
Driver's door
1 All side windows
2 Power windows
3 Exterior mirrors
All around the selector lever
Controller
General information
The buttons can be used to open the menus
directly. The Controller can be used to select menu items and enter the settings.
Buttons on the Controller
Button Function
Press once: calls up the main
menu.
Press twice: open recently used
menus.
Opens the previous display.
Opens the Options menu.
Open the Audio menu.
Opens the Phone menu.
1 Selector lever
2 Controller with buttons
3 Parking brake
Central Information Display (CID)
Concept
The Central Information Display (CID) combines the functions of a multitude of
switches. These functions can be operated
via the Controller.
Online Edition for Part no. 01402667273 - VI/19
23
Page 24
QUICK REFERENCE Set-up and use
Set-up and use
Seats, mirrors, and steering wheel
Manually adjustable seats
1 Forward/backward
2 Thigh support
3 Height
4 Backrest tilt
Adjusting the head restraint
Height
Adjusting the exterior mirrors
1 Adjusting
2 Selecting a mirror, Automatic Curb Mon-
itor
3 Folding in and out
Adjusting the steering wheel
In four directions
– To raise: push the head restraint up.
– To lower: press the button, arrow 1, and
push the head restraint down.
24
Online Edition for Part no. 01402667273 - VI/19
1. Fold the lever down.
2. Move the steering wheel to the prefer-
red height and angle to suit your seating
position.
3. Fold the lever back up.
Page 25
Set-up and use QUICK REFERENCE
Entering the rear
1. Pull lever up to the stop.
2. Fold backrest forward.
3. Push the seat forward.
Original position
1. Push the seat back into the original po-
sition.
2. Fold back the backrest to lock the seat.
Infotainment
Radio
Control elements
1 Changing the waveband
2 Changing the entertainment source
3 Sound output on/off, volume
4 Changing the station/track
5 Programmable memory buttons
Pairing the mobile phone
After the mobile phone is paired once with
the vehicle, the mobile phone can be operated using the Central Information Display
(CID), the steering wheel buttons and spoken instructions.
1. "My MINI"
2. "System settings"
3. "Mobile devices"
4. "Connect new device"
The vehicle's Bluetooth name is displayed on the Control Display.
5. To perform additional steps on the mo-
bile phone, refer to the mobile phone
owner's manual: e.g., search for or connect the Bluetooth device or a new device.
The Bluetooth name of the vehicle appears on the mobile phone display. Select the Bluetooth name of the vehicle.
6. Depending on the mobile device, a con-
trol number is displayed or the control
number must be entered.
– Compare the control number dis-
played on the Control Display with
the control number on the display of
the device.
Confirm the control number on the
device and on the Control Display.
– Enter and confirm the same control
number on the device and via the
Central Information Display (CID).
The device is connected and displayed
in the device list.
The mobile phone is connected and will appear at the top of the list of mobile phones.
Online Edition for Part no. 01402667273 - VI/19
25
Page 26
QUICK REFERENCE Set-up and use
Using the phone
Accepting a call
Incoming call can be accepted via the Central Information Display (CID) or the button
on the steering wheel.
Via the Central Information Display (CID)
"Accept"
Via the button on the steering wheel
Press the button.
Dialing a number
1. "Communication"
2. "Dial number"
3. Select the numbers individually.
4. Select the symbol.
26
Online Edition for Part no. 01402667273 - VI/19
Page 27
On the road
On the road QUICK REFERENCE
Driving
Starting and stopping the engine
Ignition on/off
– On: press the Start/Stop
button.
Most of the indicator/
warning lights light up for
a varied length of time.
– Off: press the Start/Stop button again.
All indicator lights go out.
– Radio-ready state: when the ignition is
switched off, press the ON/OFF button
on the radio or when the engine is running, press the Start/Stop button.
Some electronic systems/power consumers remain ready for operation.
Start/stop engine
Steptronic transmission: starting
1. Depress the brake pedal.
2. Engage selector lever position P or N.
3. Press the Start/Stop button.
3. Press the Start/Stop button.
Manual transmission: switching off
1. With the vehicle at a standstill, press
the Start/Stop button.
2. Shift into first gear or reverse.
3. Set the parking brake.
Auto Start/Stop function
Steptronic transmission: switches the engine off automatically while stationary to
save fuel. The engine starts automatically
when the brake pedal is released.
Manual transmission: switches the engine
off automatically while stationary to save
fuel. As soon as the clutch pedal is depressed, the engine starts automatically.
Parking brake
Applying
The lever automatically engages after being
pulled up.
Releasing
Manual transmission: starting
1. Depress the brake pedal.
2. Press on the clutch pedal and shift to
neutral.
3. Press the Start/Stop button.
Steptronic transmission: switching off
1. When the vehicle is stationary, apply
the parking brake.
2. Engage selector lever position P.
Online Edition for Part no. 01402667273 - VI/19
Raise lever slightly, press the button and
guide the lever down.
27
Page 28
QUICK REFERENCE On the road
Manual transmission
Shifting
When shifting into 5th or 6th gear, push
the gearshift lever to the right in order to
prevent inadvertent shifting into the 3rd or
4th gear.
Reverse gear
Select only when the vehicle is stationary.
To overcome the resistance push the gear-
shift lever dynamically to the left and engage reverse gear with a forward shifting
movement.
Steptronic transmission
Selector lever positions
Parking position P.
R is reverse.
Neutral N.
Drive mode D.
Engage selector lever position P or R only
when the vehicle is stationary.
To prevent the vehicle from creeping after
you select a drive mode or reverse, maintain
pressure on the brake pedal until you are
ready to start.
Steptronic transmission, Sport and
manual mode
Sport program:
Press the selector lever to the left from se-
lector lever position D.
Manual mode:
– To shift down: press the selector lever
forward.
– To shift up: pull the selector lever rear-
wards.
High beams, headlight flasher, turn
signal, roadside parking light
High beams, headlight flasher
Selector lever lock
A lock prevents an inadvertent change from
selector lever position P to another selector
lever position and, depending on the transmission version, inadvertent switching to
selector lever position P or R.
To release the lock: with the brake pedal depressed, press the button on the front or
side of the selector lever.
28
Online Edition for Part no. 01402667273 - VI/19
Push the lever forward or pull it backward.
– High beams on, arrow 1.
The high beams light up when the low
beams are switched on.
– High beams off/headlight flasher, ar-
row 2.
Page 29
On the road QUICK REFERENCE
Turn signal
– On: press the lever past the resistance
point.
– Off: lightly tap the lever to the resist-
ance point.
– Off: press the lever past the resistance
point in the opposite direction.
– Triple turn signal activation: lightly tap
the lever up or down.
– Brief signaling: press the lever to the re-
sistance point and hold it there for as
long as you want the turn signal to flash.
Canada: roadside parking light
Lights and lighting
Light functions
Symbol Function
Front fog lights.
Automatic headlight control.
Lights off.
Daytime running lights.
Parking lights.
Low beams.
Instrument lighting.
Wiper system
To illuminate the vehicle on one side.
– On: with the ignition switched off, press
the lever either up or down past the resistance point for approx. 2 seconds.
– Off: briefly press the lever to the resist-
ance point in the opposite direction.
Online Edition for Part no. 01402667273 - VI/19
Switching the wipers on/off and brief
wipe
Switching on
Press the lever up until the desired position
is reached.
– Resting position of the wipers: posi-
tion 0.
29
Page 30
QUICK REFERENCE On the road
– Rain sensor: position 1.
– Normal wiper speed: position 2.
– Fast wiper speed: position 3.
Brief wipe and switching off
Press the lever down.
– Switching off: press the lever down until
it reaches its standard position.
– Brief wipe: press the lever down from
the standard position.
Rain sensor
Activating/deactivating
Set interval or sensitivity of the rain
sensor
Turn the thumbwheel on the wiper lever.
Cleaning the windshield
Pull the lever.
To activate: press the lever up once from its
standard position, arrow 1.
To deactivate: press the lever back into the
standard position.
30
Online Edition for Part no. 01402667273 - VI/19
Canada: wiper system
Switching the wipers on/off and brief
wipe
Switching on
Tap up the lever or press it past the resistance point.
Page 31
On the road QUICK REFERENCE
– Normal wiper speed: tap up once.
– Fast wiper speed: tap up twice or tap
once beyond the resistance point.
Brief wipe and switching off
Press the lever down.
– To switch off fast wipe: press down
twice.
– To switch off normal wipe: press down
once.
– Brief wipe: press down once.
Rain sensor
Activating/deactivating
Set interval or sensitivity of the rain
sensor
Turn the thumbwheel on the wiper lever.
Cleaning the windshield
Pull the lever.
Press the button on the wiper lever.
Online Edition for Part no. 01402667273 - VI/19
Climate control
Air conditioner
Button Function
Temperature.
Air conditioning.
Recirculated-air mode.
31
Page 32
QUICK REFERENCE On the road
Button Function
Controls the air flow,
manual.
Controls the air distribution
manually.
Windshield defroster.
Automatic climate control
Button Function
Temperature.
Air conditioning.
Button Function
Defrosts and defogs the
windows.
Windshield defroster.
Rear window defroster.
Refueling
Refueling
Fuel cap
1. Grasp the fuel filler flap at the rear edge
and open it.
32
Maximum cooling.
AUTO program.
Recirculated-air mode.
Automatic recirculated-air
control AUC/recirculatedair mode.
Controls the air flow,
manual.
Air distribution, manual.
Online Edition for Part no. 01402667273 - VI/19
2. Turn the fuel cap counterclockwise.
3. Place the fuel cap in the bracket at-
tached to the fuel filler flap.
Gasoline
For the best fuel efficiency, the gasoline
should be sulfur-free or very low in sulfur
content.
Refuel only with unleaded gasoline without
metallic additives.
Information on the recommended fuel grade
can be found in the Owner's Manual.
Page 33
On the road QUICK REFERENCE
Wheels and tires
Tire inflation pressure specifications
The tire inflation pressure values can be
found on the sign on the door pillar.
Checking the tire inflation pressure
Regularly check the tire inflation pressure
and correct it as needed:
– At least twice a month.
– Before embarking on an extended trip.
After correcting the tire inflation
pressure
Reinitialize the Flat Tire Monitor.
Reset the Tire Pressure Monitor.
The engine oil level is displayed.
Adding engine oil
General information
Switch off the ignition and safely park the
vehicle before engine oil is added.
Adding
Only add engine oil when the message is
displayed in the instrument cluster.
Observe the quantity to be added in the
message.
Take care not to add too much engine oil.
Observe recommended engine oil types.
Electronic oil measurement
Requirements
A current measured value is available after
approx. 30 minutes of driving. During a
shorter trip, the status of the last, sufficiently long trip is displayed.
Displaying the engine oil level
On the radio:
1. Press the button.
2. "Vehicle Info"
3. "Vehicle status"
4. "Engine oil level"
Online Edition for Part no. 01402667273 - VI/19
Providing assistance
Hazard warning flashers
The button is located above the Control Display.
33
Page 34
QUICK REFERENCE On the road
Breakdown assistance
MINI Roadside Assistance
This service can be reached around the
clock in many countries.
1. "MINI Connected"
2. "MINI Assist"
3. "MINI Roadside Assistance"
The contact to the MINI Roadside Assistance is established.
A telephone number is displayed, if
needed. Select to dial the telephone
number on a connected mobile phone.
34
Online Edition for Part no. 01402667273 - VI/19
Page 35
On the road QUICK REFERENCE
Online Edition for Part no. 01402667273 - VI/19
35
Page 36
36
Online Edition for Part no. 01402667273 - VI/19
Page 37
AT A GLANCE
Cockpit ........................................................................................................ 38
Central Information Display (CID) ...................................................... 42
General settings ....................................................................................... 47
Owner's Manual media ........................................................................... 56
Online Edition for Part no. 01402667273 - VI/19
37
Page 38
AT A GLANCE Cockpit
Cockpit
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with
the series. It also describes features that are
not necessarily available in your vehicle, for
instance, due to the selected options or
country versions. This also applies to safetyrelated functions and systems. When using
these functions and systems, the applicable
laws and regulations must be observed.
In the vicinity of the steering wheel
1 Power windows, all 73
2 Power windows, individual 73
3 Exterior mirror operation 86
4 Buttons of the central locking sys-
tem 66
5 Lights
Front fog lights 138
Light switch 135
38
Online Edition for Part no. 01402667273 - VI/19
Lights off
Daytime running lights 137
Parking lights 135
Low beams 135
Page 39
Cockpit AT A GLANCE
Automatic headlight control 136
Cornering light 137
High-beam Assistant 137
Instrument lighting 139
6 Steering wheel buttons, left
Camera-based cruise control
on/off 167
Cruise control on/off 173
Cruise control: to store the
speed
Pausing, continuing cruise
control
Cruise control: increase speed
Cruise control: reduce speed
Camera-based cruise control:
reduce distance
Roadside parking lights 136
Onboard Computer 128
8 Instrument cluster 118
9 Steering column stalk, right
Wipers 101
Wiper on Canadian mod-
els 104
Rain sensor 102
Rain sensor on Canadian mod-
els 105
Cleaning windows 103
10 Steering wheel buttons, right
Telephone 246
Confirm the selection 128
Selection back 128
Camera-based cruise control:
increase distance
7 Steering column stalk, left
Turn signal 100
High beams, headlight flasher 100
High-beam Assistant 137
Online Edition for Part no. 01402667273 - VI/19
Selection next 128
Increase volume
Reduce volume
11 Horn, entire surface
12 Adjusting the steering wheel 88
13 Unlocking the hood 282
39
Page 40
AT A GLANCE Cockpit
In the vicinity of the center console
1 Hazard warning system 301
Intelligent Safety 153
2 Control Display 42
3 Radio/Multimedia
4 Glove compartment 204
5 Climate control 187
6 PDC Park Distance Con-
trol 175
Rearview camera 178
Parking assistant 182
Auto Start/Stop func-
tion 97
40
Online Edition for Part no. 01402667273 - VI/19
Start/stop the engine and
switch the ignition on/
off 94
DSC Dynamic Stability Control
162
MINI Driving Modes
switch 164
7 Steptronic transmission selector
lever 109
Manual transmission selector
lever 108
8 Controller with buttons 44
9 Parking brake 100
Page 41
All around the interior mirror
Cockpit AT A GLANCE
1 Emergency Request,
SOS 302
2 Indicator light, front-seat pas-
senger airbag 144
3 Reading lights 139
Online Edition for Part no. 01402667273 - VI/19
4 Ambient light 139
5 Convertible top 75
6 Interior lights 139
41
Page 42
AT A GLANCE Central Information Display (CID)
Central Information Display (CID)
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with
the series. It also describes features that are
not necessarily available in your vehicle, for
instance, due to the selected options or
country versions. This also applies to safetyrelated functions and systems. When using
these functions and systems, the applicable
laws and regulations must be observed.
Concept
The Central Information Display (CID) combines the functions of a multitude of
switches. These functions can be operated
via the Controller.
Safety information
Warning
Operating the integrated information systems and communication devices while
driving can distract from traffic. It is possible to lose control of the vehicle. There is
a risk of accident. Only use the systems or
devices when the traffic situation allows.
As warranted, stop and use the systems
and devices while the vehicle is stationary.
Input and display
Letters and numbers
Depending on the menu, you can switch between entering upper and lower case letters, numbers and characters:
Symbol Function
or
Insert blank space.
Use voice activation.
Confirm entry.
Without navigation system
Select the symbol.
Entry comparison
When entering names and addresses, the
choice is narrowed down with every letter
entered and letters may be added automatically.
Entries are continuously compared with
data stored in the vehicle.
Only those letters are offered during entry
for which data is available.
Activating/deactivating the
functions
Several menu items are preceded by a
checkbox. The checkbox indicates whether
the function is activated or deactivated. Selecting the menu item activates or deactivates the function.
Function is activated.
Function is deactivated.
Change between capital and
lower-case letters.
42
Online Edition for Part no. 01402667273 - VI/19
Page 43
Central Information Display (CID) AT A GLANCE
Status information
General information
The status field can be found in the upper
area of the Control Display. Status information is displayed in the form of symbols.
Radio
Symbol Meaning
HD Radio station is being re-
ceived.
Satellite radio is switched on.
Telephone
Symbol Meaning
Incoming or outgoing call.
Missed call.
Signal strength of cellular net-
work.
Symbol flashes: network search.
Cellular network is not available.
Roaming is active.
SMS text message received.
Message received.
Reminder.
Sending not possible.
Entertainment
Symbol Meaning
Bluetooth audio.
USB audio interface.
Other symbols
Symbol Meaning
Check Control message.
The sound output has been
switched off.
Checking the current vehicle po-
sition.
Control elements
Overview
1 Control Display
2 Controller with buttons
Control Display
General information
To clean the Control Display, follow the care
instructions, refer to page 313.
In the case of very high temperatures on
the Control Display, for instance due to intense solar radiation, the brightness may be
reduced down to complete deactivation.
Once the temperature is reduced, for instance through shade or air conditioning,
the normal functions are restored.
Online Edition for Part no. 01402667273 - VI/19
43
Page 44
AT A GLANCE Central Information Display (CID)
Safety information
NOTICE
Objects in the area in the front of the Control Display can shift and damage the Control Display. There is a risk of damage to
property. Do not place objects in the area
in front of the Control Display.
– Press to select a menu item, for example.
Switching on/off automatically
The Control Display is switched on automatically after unlocking.
In certain situations, the Control Display is
switched off automatically, for instance if
no operation is performed on the vehicle for
several minutes.
Switching on/off manually
The Control Display can also be switched off
manually.
– Tilt in two directions to switch between
displays, for example.
1. Press the button.
2. "Turn off control display"
Press the Controller or any button on the
Controller to switch it back on again.
Controller
General information
The buttons can be used to open the menus
directly. The Controller can be used to select menu items and enter the settings.
Operation
– Turn to switch between menu items, for
example.
44
Online Edition for Part no. 01402667273 - VI/19
Buttons on the Controller
Button Function
Press once: calls up the main
menu.
Press twice: open recently used
menus.
Opens the previous display.
Opens the Options menu.
Page 45
Central Information Display (CID) AT A GLANCE
Button Function
Open the Audio menu.
Opens the Phone menu.
Operating via the Controller
Opening the main menu
Press the button.
The main menu is displayed.
All Central Information Display (CID) func-
tions can be called up via the main menu.
Selecting menu items
Highlighted menu items can be selected.
1. Turn the Controller until the desired
menu item is highlighted.
Changing between displays
After a menu item is selected, for instance
"System settings", a new display appears.
– Move the Controller to the left.
The current display closes and the previous display is shown.
– Press the button.
The previous display re-opens.
– Move the Controller to the right.
The new display opens.
An arrow indicates that additional displays
can be opened.
Opening recently used menus
The recently used menus can be displayed.
Press the button twice.
Opening the Options menu
Press the button.
The "Options" menu is displayed.
The menu consists of various areas:
– Control options for the selected main
menu, for instance for "Media/Radio".
– If applicable, further operating options
for the selected menu, for instance "Save
station".
2. Press the Controller.
Online Edition for Part no. 01402667273 - VI/19
Changing settings
Settings, such as brightness, can be entered.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Control display"
5. "Brightness at night"
45
Page 46
AT A GLANCE Central Information Display (CID)
6. Turn the Controller until the desired set-
ting is displayed.
7. Press the Controller.
Entering letters and numbers
Input
1. Turn the Controller: select letters or
numbers.
2. : confirm entry.
Deleting
Symbol Function
Press the Controller: delete
letters or number.
or
Hold the Controller down: delete all letters or numbers.
Using alphabetical lists
For alphabetical lists with more than 30 entries, the letters for which there is an entry
are displayed at the left edge.
instance radio stations, phone numbers, and
menu entries.
Settings are stored for the driver profile
currently used.
Storing a function
1. Select the function via the Central Infor-
mation Display (CID).
2. Press and hold the desired but-
ton, until a signal sounds.
Executing a function
Press the button.
The function will work immediately.
This means, for instance that the number is
dialed when a phone number is selected.
Displaying the key assignment
Touch buttons with finger. Do not wear
gloves or use objects.
The button assignment is displayed at the
top edge of screen.
1. Turn the Controller to the left or right
quickly.
All letters for which there are entries
are displayed on the left edge.
2. Select the first letter of the desired en-
try.
The first entry of the selected letter is
displayed.
Programmable memory buttons
General information
The Central Information Display (CID) functions can be stored on the programmable
memory buttons and called up directly, for
46
Online Edition for Part no. 01402667273 - VI/19
Deleting the button assignments
1. Press buttons 1 and 6 simultaneously
for approx. 5 seconds.
2. "OK"
Page 47
General settings
General settings AT A GLANCE
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with
the series. It also describes features that are
not necessarily available in your vehicle, for
instance, due to the selected options or
country versions. This also applies to safetyrelated functions and systems. When using
these functions and systems, the applicable
laws and regulations must be observed.
Language
Setting the language
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. If necessary, "Language"
4. "Language:"
5. Select the desired setting.
The setting is stored for the driver profile
currently used.
Time
Setting the time
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Date and time"
4. "Time:"
5. Turn the Controller until the desired
hours are displayed.
6. Press the Controller.
7. Turn the Controller until the desired mi-
nutes are displayed.
8. Press the Controller.
Setting the time format
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Date and time"
4. "Time format:"
5. Select the desired setting.
The setting is stored for the driver profile
currently used.
Date
Setting the date
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Date and time"
4. "Date:"
5. Turn the Controller until the desired day
is displayed.
6. Press the Controller.
7. Make the settings for the month and
year.
Online Edition for Part no. 01402667273 - VI/19
47
Page 48
AT A GLANCE General settings
Setting the date format
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Date and time"
4. "Date format:"
5. Select the desired setting.
The setting is stored for the driver profile
currently used.
Setting the units of measurement
You can set the units of measurement for
some values, for example, consumption, distances and temperature.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Units"
4. Select the desired menu item.
5. Select the desired setting.
The setting is stored for the driver profile
currently used.
Activating/deactivating
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Vehicle tracking"
4. "Vehicle tracking"
5. Select the desired setting.
Activating/deactivating popup windows
For some functions, popup windows are displayed automatically on the Control Display.
Some of these popup windows can be activated or deactivated.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Pop-ups"
4. Select the desired setting.
The setting is stored for the driver profile
currently used.
Control Display
Activating/deactivating the display of the current vehicle position
Concept
If vehicle tracking has been activated, the
current vehicle position can be displayed in
the MINI Connected app.
48
Online Edition for Part no. 01402667273 - VI/19
Brightness
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Control display"
5. "Brightness at night"
6. Turn the Controller until the desired
brightness is set.
7. Press the Controller.
Page 49
General settings AT A GLANCE
The setting is stored for the driver profile
currently used.
Depending on the light conditions, the
brightness settings may not be clearly visible.
Screensaver
If no entries are made via the Central Information Display (CID), a screensaver can be
displayed after an adjustable time.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Control display"
5. "Screensaver"
6. Select the desired setting.
The setting is stored for the driver profile
currently used.
Messages
Concept
The menu centrally displays all messages arriving in the vehicle in list form.
General information
The following messages can be displayed:
– Traffic messages.
– Check Control messages.
– Service requirements messages.
– Messages from the vehicle manufac-
turer.
Messages are additionally displayed in the
status field.
Retrieving messages
Via the Central Information Display (CID):
1. "Notifications"
2. Select the desired message.
The respective menu is opened, where the
message is displayed.
Deleting messages
All messages, except Check Control messages or messages from the vehicle manufacturer, can be deleted from the list.
Check Control messages or messages from
the vehicle manufacturer are displayed as
long as they are relevant.
Via the Central Information Display (CID):
1. "Notifications"
2. Select the desired message.
3. Press the button.
4. "Delete this notification" or "Delete all
notifications"
Adjusting
The following settings can be adjusted:
– Select the applications, from which mes-
sages will be permitted.
– Sort the messages according to date or
priority.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Notifications"
4. Select the desired setting.
Online Edition for Part no. 01402667273 - VI/19
49
Page 50
AT A GLANCE General settings
Data protection
Data transfer
Concept
The vehicle offers various functions which
require data to be transferred to MINI or a
service provider. The data transfer can be
deactivated for some functions.
General information
With data transfer deactivated, the respective function cannot be used.
Only make these settings while stationary.
Activating/deactivating
Follow the instructions on the Control Display.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Data privacy"
4. Select the desired setting.
Deleting personal data in the
vehicle
– Travel and Onboard Computer informa-
tion.
– Phone book.
Altogether, the deletion of the data can take
up to 15 minutes.
Functional requirement
Data can only be deleted while stationary.
Deleting data
Note and follow the instructions on the Control Display.
Via the Central Information Display (CID):
1. Switch on the ignition.
2. "My MINI"
3. "System settings"
4. "Data privacy"
5. "Delete personal data"
6. "Delete personal data"
7. "OK"
8. Exit and lock the vehicle.
The deletion process takes 15 minutes to
complete.
If not all data was deleted, repeat the deletion.
Concept
Depending on the usage, the vehicle stores
personal data, such as stored radio stations.
This personal data can be permanently deleted via the Central Information Display
(CID).
General information
Depending on the vehicle equipment, the
following data is deleted:
– Driver profile settings.
– Stored radio stations.
– Stored programmable memory buttons.
50
Online Edition for Part no. 01402667273 - VI/19
Canceling deletion
Start the engine to cancel deletion of the
data.
Connections
Concept
Various connection types are available for
using mobile devices in the vehicle. The
connection type to select depends on the
mobile device and the desired function.
Page 51
General settings AT A GLANCE
General information
The following overview shows possible
functions and the suitable connection types
for them. The scope of functions depends on
the mobile device.
Function Connec-
tion type
Making calls via the handsfree system.
Using phone functions via
the Central Information Display (CID).
Playing music from the
smartphone or the audio
player.
USB storage device:
Playing music.
The following connection types require onetime pairing with the vehicle:
– Bluetooth.
Paired devices are automatically recognized
later on and connected to the vehicle.
Bluetooth.
Bluetooth
or USB.
USB.
Safety information
Warning
Operating the integrated information systems and communication devices while
driving can distract from traffic. It is possible to lose control of the vehicle. There is
a risk of accident. Only use the systems or
devices when the traffic situation allows.
As warranted, stop and use the systems
and devices while the vehicle is stationary.
Compatible devices
General information
Malfunctions may occur with devices not
listed or deviating software versions.
Displaying the vehicle identification
number and software part number
When looking for compatible devices, you
may have to state the vehicle identification
number and the software part number.
These numbers can be displayed in the vehicle.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Mobile devices"
4. "Settings"
5. "Bluetooth® info"
6. "System information"
Bluetooth connection
Functional requirements
– Compatible device, refer to page 51,
with Bluetooth interface.
– The vehicle key is in the vehicle.
– The device is ready for operation.
– Bluetooth is activated on the device and
in the vehicle, refer to page 51.
– Bluetooth presettings, such as visibility,
may be required on the device; refer to
the owner's manual of the device.
Switching on Bluetooth
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Mobile devices"
Online Edition for Part no. 01402667273 - VI/19
51
Page 52
AT A GLANCE General settings
4. "Settings"
5. "Bluetooth®"
Pairing the mobile device with the
vehicle
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Mobile devices"
4. "Connect new device"
5. Select the functions for which the de-
vice will be used:
– "Telephone"
– "Bluetooth® audio"
The vehicle's Bluetooth name is displayed on the Control Display.
6. On the mobile device, search for Blue-
tooth devices in the vicinity.
The Bluetooth name of the vehicle ap-
pears on the mobile device display.
Select the Bluetooth name of the vehi-
cle.
7. Depending on the mobile device, a con-
trol number is displayed or the control
number must be entered.
– Compare the control number dis-
played on the Control Display with
the control number on the display of
the device.
Confirm the control number on the
device and on the Control Display.
– Enter and confirm the same control
number on the device and via the
Central Information Display (CID).
The device is connected and displayed
in the device list.
If connection was not successful: Frequently Asked Questions, refer to page 52.
Frequently Asked Questions
All requirements are met and all required
steps were completed in the specified order.
Despite that, the mobile device does not
function as expected.
In this case, the following explanations can
help:
Why could the mobile phone not be paired
or connected?
– There are too many Bluetooth devices
connected to the mobile phone or vehicle.
In the vehicle, delete Bluetooth connections with other devices.
Delete all known Bluetooth connections
from the device list on the mobile phone
and start a new device search.
– The mobile phone is in power-save mode
or has only a limited remaining battery
life.
Charge the mobile phone.
Why does the mobile phone no longer react?
– The applications on the mobile phone do
not function anymore.
Switch the mobile phone off and on
again.
– Possibly too high or too low ambient
temperatures for mobile phone operation.
Do not subject the mobile phone to extreme ambient temperatures.
Why can phone functions not be used via
the Central Information Display (CID)?
– The mobile phone may not be properly
configured, for instance as Bluetooth audio device.
Connect the mobile phone with the telephone function.
Why are no or not all phone book entries
displayed or why are they incomplete?
52
Online Edition for Part no. 01402667273 - VI/19
Page 53
General settings AT A GLANCE
– Transmission of the phone book entries
is not yet complete.
– It is possible that only the phone book
entries of the mobile phone or the SIM
card are transmitted.
– It may not be possible to display phone
book entries with special characters.
– It may not be possible to transmit con-
tacts from social networks.
– The number of phone book entries to be
stored is too high.
– Data volume of the contact too large, for
instance due to stored information such
as notes.
Reduce the data volume of the contact.
– A mobile phone is only connected as an
audio source.
Reconfigure the mobile phone and con-
nect it with the telephone function.
How can the phone connection quality be
improved?
– The strength of the Bluetooth signal on
the mobile phone can be adjusted, depending on the mobile phone.
If all points in this list have been checked
and the required function is still not available, contact the hotline, a dealer’s service
center or another qualified service center or
repair shop.
USB connection
General information
Mobile devices with a USB port are connected to the USB interface.
– Mobile phones.
– Audio devices with USB port, for in-
stance MP3 players.
– USB storage devices.
Common file systems are supported.
FAT32 and exFAT are the recommended
formats.
A connected USB storage device will be
supplied with charge current via the USB
interface if the device supports this. Follow
the maximum charge current of the USB interface.
USB interfaces with data transfer can be
used to play the music files via USB Audio.
Follow the following when connecting:
– Do not use force when plugging the con-
nector into the USB interface.
– Use a flexible adapter cable.
– Protect the USB storage device against
mechanical damage.
– Due to the large number of USB storage
devices available on the market, it can-
not be guaranteed that every device is
operable on the vehicle.
– Do not expose USB storage devices to
extreme environmental conditions, such
as very high temperatures; refer to the
owner's manual of the device.
– Due to the many different compression
techniques, proper playback of the me-
dia stored on the USB storage device
cannot be guaranteed in all cases.
– To ensure proper transmission of the
stored data, do not charge a USB storage
device via the onboard socket, when it
is connected to the USB interface.
– Depending on how the USB storage de-
vice is being used, settings may be re-
quired on the USB storage device, refer
to the owner's manual of the device.
Not compatible USB media:
– USB hard drives.
– USB hubs.
– USB memory card readers with multiple
slots.
– HFS-formatted or NTFS-formatted USB
storage devices.
– Devices such as fans or lamps.
Online Edition for Part no. 01402667273 - VI/19
53
Page 54
AT A GLANCE General settings
Functional requirement
Compatible device, refer to page 51, with
USB interface.
Connecting the device
Connect the USB storage device using a
suitable adapter cable to a USB interface,
refer to page 203.
The USB storage device is connected to the
vehicle and displayed in the device list.
Managing mobile devices
General information
– After one-time pairing, the devices are
automatically recognized and reconnected when the ignition is switched on.
– The data stored on the SIM card or in
the mobile phone is transferred to the
vehicle after recognition.
– For some devices, certain settings may
be necessary, for instance authorization,
see owner's manual of the device.
Displaying the device list
All devices paired and/or connected with
the vehicle are displayed in the device list.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Mobile devices"
A symbol indicates, for which function a device is used.
Symbol Function
"Telephone"
"Bluetooth® audio"
Configuring the device
Functions can be activated or deactivated
for paired and connected devices.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Mobile devices"
4. Select the desired device.
5. Select the desired setting.
If a function is assigned to a device, the
function will be deactivated where appropriate for a device that is already connected
and the device will be disconnected.
Disconnecting the device
The device's connection to the vehicle is
disconnected.
The device remains paired and can be connected again, refer to page 54.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Mobile devices"
4. Select device.
5. "Disconnect device"
Connecting the device
A disconnected device can be reconnected.
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Mobile devices"
4. Select device.
5. "Connect device"
The functions that were assigned to the device before disconnecting are assigned to
the device when it is reconnected. The functions may be deactivated on a device already connected.
54
Online Edition for Part no. 01402667273 - VI/19
Page 55
Deleting the device
Via the Central Information Display (CID):
1. "My MINI"
2. "System settings"
3. "Mobile devices"
4. Select device.
5. "Delete device"
The device is disconnected and removed
from the device list.
General settings AT A GLANCE
Online Edition for Part no. 01402667273 - VI/19
55
Page 56
AT A GLANCE Owner's Manual media
Owner's Manual media
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with
the series. It also describes features that are
not necessarily available in your vehicle, for
instance, due to the selected options or
country versions. This also applies to safetyrelated functions and systems. When using
these functions and systems, the applicable
laws and regulations must be observed.
General information
You can use the following media formats to
call up the content in the Owner's Manual:
– Printed Owner's Manual, refer to
page 56.
Printed Owner's Manual
Concept
The printed Owner's Manual describes all
standard, country-specific, and optional features offered with the series.
General information
The Owner's Manual for Navigation, Entertainment, and Communication can be obtained as a printed book from the service
center.
Supplementary Owner's Manuals
Also follow the Supplementary Owner's
Manuals, which are included in addition to
the onboard literature.
56
Online Edition for Part no. 01402667273 - VI/19
Page 57
Owner's Manual media AT A GLANCE
Online Edition for Part no. 01402667273 - VI/19
57
Page 58
58
Online Edition for Part no. 01402667273 - VI/19
Page 59
CONTROLS
Opening and closing ................................................................................ 60
Seats, mirrors, and steering wheel ..................................................... 80
Transporting children safely ................................................................ 90
Driving ........................................................................................................ 94
Displays .................................................................................................... 118
Lights ........................................................................................................ 135
Safety ......................................................................................................... 141
Driving stability control systems ..................................................... 162
Driving comfort ...................................................................................... 167
Climate control ....................................................................................... 187
Interior equipment ................................................................................ 196
Storage compartments ......................................................................... 204
Cargo area ................................................................................................ 207
Online Edition for Part no. 01402667273 - VI/19
59
Page 60
CONTROLS Opening and closing
Opening and closing
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with
the series. It also describes features that are
not necessarily available in your vehicle, for
instance, due to the selected options or
country versions. This also applies to safetyrelated functions and systems. When using
these functions and systems, the applicable
laws and regulations must be observed.
Vehicle key
General information
The vehicle is supplied with two vehicle
keys with integrated key.
Each vehicle key contains a replaceable battery, refer to page 63.
Depending on the equipment and country
version, various settings, refer to page 70,
can be configured for the button functions.
A personal driver profile, refer to page 69,
for each vehicle key is stored in the vehicle.
To provide information on maintenance requirements, the service data is stored in the
vehicle key, refer to page 290.
To prevent possible locking in of the vehicle
key, take the vehicle key with you when exiting the vehicle.
of injury. Take the vehicle key with you so
that the vehicle can be opened from the
outside.
Warning
Unlocking from the inside is only possible
with special knowledge.
Persons who spend a lengthy time in the
vehicle while being exposed to extreme
temperatures are at risk of injury or death.
Do not lock the vehicle from the outside
when there are people in it.
Warning
Unattended children or animals in the vehicle can cause the vehicle to move and
endanger themselves and traffic, for instance due to the following actions:
– Pressing the Start/Stop button.
– Releasing the parking brake.
– Opening and closing the doors or
windows.
– Engaging selector lever position N.
– Using vehicle equipment.
There is a risk of accidents or injuries. Do
not leave children or animals unattended
in the vehicle. Take the vehicle key with
you when exiting and lock the vehicle.
Safety information
Warning
People or animals in the vehicle can lock
the doors from the inside and lock themselves in. In this case, the vehicle cannot
be opened from the outside. There is a risk
60
Online Edition for Part no. 01402667273 - VI/19
Page 61
Opening and closing CONTROLS
Overview
1 Unlocking
2 Locking
3
Unlocking the trunk lid
4 Panic mode
Unlocking
Press the button on the vehicle key.
Depending on the settings, refer to
page 70, the following access points are
unlocked.
– Driver's door and fuel filler flap.
Press the button on the vehicle key
again to unlock the other vehicle access
points.
– All doors, trunk lid, and fuel filler flap.
In addition, the following functions are executed:
– Unlocking is confirmed by the turn sig-
nals and the horn. This function must be
activated in the settings, refer to
page 70.
– The settings stored in the driver profile,
refer to page 69, are applied.
– The interior lights, refer to page 139,
and the MINI logo projection are
switched on, provided that the interior
lights were not switched off manually.
– Depending on the settings, the welcome
light and headlight courtesy delay feature, refer to page 136, are switched on.
– Exterior mirrors folded through conven-
ient closing are folded open.
– The alarm system, refer to page 71, is
switched off.
The light functions may depend on the ambient brightness.
Convenient opening
Safety information
Warning
Body parts can be jammed when opening
and closing the convertible top. There is a
risk of injury. When opening and closing
the convertible top, observe the movement
and keep the area of movement clear.
Opening
Press and hold the button on the vehicle key after unlocking.
The windows and the sliding sun roof
integrated into the convertible top are
opened, as long as the button on the vehicle
key is pressed.
With Comfort Access:
If close to the vehicle, the convertible top
can also be opened.
Press the button on the vehicle key
again after the sliding sun roof
integrated into the convertible top
is fully opened. Press and hold the button
until the convertible top is fully opened and
locked.
Leaving the vicinity of the vehicle stops the
motion.
Online Edition for Part no. 01402667273 - VI/19
61
Page 62
CONTROLS Opening and closing
Locking
1. Close the driver's door.
2. Press the button on the vehicle
key.
The following functions are executed:
– All doors, the trunk lid, and the fuel filler
flap are locked.
– Locking is confirmed by the turn signals
and the horn. This function must be activated in the settings, refer to
page 70.
– The alarm system, refer to page 71, is
switched on.
If the engine or ignition is still switched on
when you lock the vehicle, the vehicle horn
honks twice. In this case, the engine or ignition must be switched off by means of the
Start/Stop button.
With Comfort Access: convenient
closing
Safety information
Warning
With convenient closing, body parts can
be jammed. There is a risk of injury. Make
sure that the area of movement of the
doors is clear during convenient closing.
Press button in the vicinity of the vehicle
again until the convertible top operation is
completed.
Switch on interior lights and
courtesy light
Press the button on the vehicle key
with the vehicle locked.
The MINI logo projection is also switched
on.
These functions are not available if the interior lights were switched off manually.
The light functions may depend on the ambient brightness.
After locking, wait 10 seconds before pressing the button again.
Trunk lid
General information
To avoid locking the vehicle key in the vehicle, do not place the remote control in the
cargo area.
Depending on the vehicle equipment and
country version, it is possible to specify
whether the trunk lid can be unlocked with
the vehicle key and how the vehicle doors
will respond to this. To perform settings, refer to page 70.
Closing
Press and hold the button on the vehicle key in the area close to the vehicle, until the closing operation is
completed.
The windows and convertible top close.
Releasing the button stops the closing pro-
cedure. Leaving the vicinity of the vehicle
stops the motion of the convertible top.
62
Online Edition for Part no. 01402667273 - VI/19
Safety information
Warning
Body parts can be jammed when operating
the trunk lid. There is a risk of injury.
Make sure that the area of movement of
the trunk lid is clear during opening and
closing.
Page 63
Opening and closing CONTROLS
Opening
Press the button on the vehicle key
for approx. 1 second.
The trunk lid is unlocked and can be swung
downward.
Panic mode
You can trigger the alarm system if you find
yourself in a dangerous situation.
– Press the button on the vehicle
key and hold for at least 3 seconds.
– Briefly press the button on the vehicle
key three times in succession.
To switch off the alarm: press any button.
Replacing the battery
1. Remove the integrated key from the ve-
hicle key, refer to page 65.
2. Slide the integrated key into the open-
ing and raise the cover.
The battery compartment is accessible.
3. Slide the integrated key in the cover of
the battery compartment and raise the
cover.
4. Push battery in the direction of the ar-
row using a pointed object and lift it
out.
5. Insert a type CR 2032 battery with the
positive side facing up.
6. Insert lid and cover.
7. Push the integrated key into the vehicle
key until it engages.
Have old batteries disposed of by a
dealer’s service center or another
qualified service center or repair
shop or take them to a collection point.
Additional vehicle keys
Additional vehicle keys are available from a
service center or another qualified service
center or repair shop.
Loss of vehicle keys
A lost vehicle key can be blocked and replaced by a dealer’s service center or an-
Online Edition for Part no. 01402667273 - VI/19
63
Page 64
CONTROLS Opening and closing
other qualified service center or repair
shop.
Malfunction
General information
A Check Control message is displayed.
Vehicle key recognition by the vehicle may
malfunction under the following circumstances:
– The battery of the vehicle key is dis-
charged. For replacing the battery, refer
to page 63.
– Interference of the radio connection
from transmission towers or other
equipment with high transmitting
power.
– Shielding of the vehicle key due to metal
objects.
Do not transport the vehicle key to-
gether with metal objects.
– Interference of the radio connection
from mobile phones or other electronic
devices in direct proximity to the vehicle key.
Do not transport the vehicle key together with electronic devices.
– Interference of radio transmission by a
charging process of mobile devices, for
instance charging of a mobile phone.
In the case of interference, the vehicle can
be unlocked and locked from the outside
with the integrated key, refer to page 65.
Starting the engine via emergency
detection of the Vehicle key
It is not possible to start the engine if the
vehicle key has not been detected.
Proceed as follows in this case:
1. Hold the vehicle key against the mark
on the steering column as shown. Pay
attention to the display in the instrument cluster.
2. If the vehicle key is detected:
Start the engine within 10 seconds.
If the vehicle key is not recognized, slightly
change the position of the vehicle key and
repeat the procedure.
Frequently Asked Questions
What precautions can be taken to be able to
open a vehicle with an accidentally locked
in vehicle key?
– The options provided by the Remote
Services of the MINI Connected app include the ability to lock and unlock a vehicle.
This requires an active MINI Connected
contract and the MINI Connected app
must be installed on a smartphone.
– Unlocking the vehicle can be requested
via the MINI Connected Call Center.
An active MINI Connected contract is
required.
64
Online Edition for Part no. 01402667273 - VI/19
Page 65
Opening and closing CONTROLS
Integrated key
General information
The driver's door can be locked and unlocked without the vehicle key using the
integrated key.
The integrated key can also be used for the
glove compartment on the front passenger
side.
Safety information
Warning
Unlocking from the inside is only possible
with special knowledge.
Persons who spend a lengthy time in the
vehicle while being exposed to extreme
temperatures are at risk of injury or death.
Do not lock the vehicle from the outside
when there are people in it.
NOTICE
The door lock is permanently joined with
the door. The door handle can be moved.
When pulling the door handle with the
integrated key inserted, paint or the
integrated key can be damaged. There is a
risk of damage to property. Remove the
integrated key before pulling the outside
door handle.
Removing
Press the button, arrow 1, and pull out the
integrated key, arrow 2.
Locking/unlocking via the door
lock
1. Remove lid on the door lock.
To do this, slide the integrated key into
the opening from below and remove the
lid.
2. Unlock or lock the door lock using the
integrated key.
The other doors must be unlocked or locked
from the inside.
Alarm system
The alarm system is not switched on if the
vehicle is locked with the integrated key.
The alarm system is triggered when the
door is opened, if the vehicle has been unlocked via the door lock.
Online Edition for Part no. 01402667273 - VI/19
65
Page 66
CONTROLS Opening and closing
Buttons for the central locking system
General information
In the event of a severe accident, the vehicle is automatically unlocked. The hazard
warning system and interior lights come on.
Overview
Buttons for the central locking system.
Locking
Press the button with the doors
closed.
– The fuel filler flap remains unlocked.
– The vehicle is not secured against theft
when locking.
Comfort Access
Concept
The vehicle can be accessed without operating the vehicle key.
Carrying the vehicle key with you, e.g., in
your pants pocket, is sufficient.
The vehicle automatically detects the vehicle key when it is in close proximity or in
the car's interior.
General information
Comfort Access supports the following
functions:
– Unlocking and locking the vehicle.
– Convenient closing.
– Opening trunk lid.
Functional requirements
– To lock the vehicle, the vehicle key must
be outside of the vehicle near the doors.
– The next unlocking and locking cycle is
not possible until after approx. 2 seconds.
Unlocking
Unlocking
Press the button.
Opening
– Press button to unlock the doors
together, and then pull the door handle
above the armrest.
– Pull the door opener on the door to be
opened. The other door remain locked.
66
Online Edition for Part no. 01402667273 - VI/19
On the driver's or front passenger's outer
door handle, press the button.
Depending on the settings, refer to
page 70, only the driver's door and the
fuel filler flap may be unlocked. Unlike
when unlocking with the vehicle key, press-
Page 67
Opening and closing CONTROLS
ing the button on the outer door handle
again does not unlock the other vehicle access points. Rather, the vehicle is locked
again.
If the vehicle was locked automatically after
driving off or with the button of the central
locking system from the inside, note the following: if a door on a locked vehicle is
opened from the inside with the door
opener, pressing the button on the outer
door handle will first lock the vehicle again.
To unlock, the button on the outer door handle must be pressed again.
Locking
On the driver's or front passenger's outer
door handle, press the button.
Convenient closing
Safety information
Closing
Press and hold down the button on the driver's or front passenger's outer door handle.
In addition to locking, the convertible top
and the windows are closed.
Press and hold the button, until the
convertible top is fully closed.
The exterior mirrors are folded in.
Opening the trunk lid
General information
If you open the trunk lid via Comfort Access, locked doors will not be unlocked.
To avoid locking the vehicle key in the vehicle, do not place the vehicle key in the cargo
area.
Safety information
Warning
With convenient closing, body parts can
be jammed. There is a risk of injury. Make
sure that the area of movement of the
doors is clear during convenient closing.
Online Edition for Part no. 01402667273 - VI/19
Warning
Body parts can be jammed when operating
the trunk lid. There is a risk of injury.
Make sure that the area of movement of
the trunk lid is clear during opening and
closing.
67
Page 68
CONTROLS Opening and closing
Opening
Press the button on the exterior of the
trunk lid.
Malfunction
Vehicle key recognition by the vehicle may
malfunction under the following circumstances:
– The battery of the vehicle key is dis-
charged. For replacing the battery, refer
to page 63.
– Interference of the radio connection
from transmission towers or other
equipment with high transmitting
power.
– Shielding of the vehicle key due to metal
objects.
Do not transport the vehicle key to-
gether with metal objects.
– Interference of the radio connection
from mobile phones or other electronic
devices in direct proximity to the vehicle key.
Do not transport the vehicle key together with electronic devices.
Wet or snowy conditions may disrupt the
locking request recognition function on the
door handles.
In the case of a malfunction, unlock and
lock the vehicle using the buttons of the vehicle key or use the integrated key, refer to
page 65.
Trunk lid
General information
To avoid locking the vehicle key in the vehicle, do not place the remote control in the
cargo area.
Depending on the vehicle equipment and
country version, it is possible to specify
whether the trunk lid can be unlocked with
the vehicle key and how the vehicle doors
will respond to this. To perform settings, refer to page 70.
Safety information
Warning
Body parts can be jammed when operating
the trunk lid. There is a risk of injury.
Make sure that the area of movement of
the trunk lid is clear during opening and
closing.
Opening from the outside
– Without Comfort Access: unlock vehicle.
With Comfort Access: unlock the vehicle or have the vehicle key with you.
Press the button on the trunk lid.
– Press the button on the vehicle
key for approx. 1 second.
Depending on the setting, the doors may
also be unlocked. Unlocking using the
vehicle key, refer to page 62.
68
Online Edition for Part no. 01402667273 - VI/19
Page 69
Opening and closing CONTROLS
The trunk lid is unlocked and can be swung
downward.
Opening from the inside
With the vehicle stationary, press
the button in the driver's floor area.
Closing
To close the trunk lid, swivel it upwards and
press it closed.
Trunk emergency unlocking
Pull the handle inside the cargo area.
The trunk lid unlocks.
Driver profiles
Concept
In the driver profiles, individual settings for
several drivers can be stored and called up
again when required.
General information
There are three driver profiles with which
personal vehicle settings can be stored. Every vehicle key has been assigned one of
these driver profiles.
If the vehicle is unlocked using the vehicle
key, the assigned personal driver profile will
be activated. All settings stored in the
driver profile are automatically applied.
If several drivers use their own vehicle
keys, the vehicle will apply the personal settings as it is being unlocked. These settings
are also restored, if the vehicle has been
used in the meantime by a person with a
different vehicle key.
Changes to the settings are automatically
stored in the driver profile currently activated.
Functional requirements
For the system to be able to identify the
driver profile associated to a particular
driver, the detected vehicle key must be
clearly allocated to the driver.
This is the case when:
– The driver is only carrying his or her
own vehicle key.
– The driver unlocks the vehicle.
– The driver gets into the vehicle through
the driver's door.
Adjusting
The settings for the following systems and
functions are stored in the active profile.
The scope of storable settings depends on
country and equipment.
– Unlocking and locking.
– Lights.
– Radio.
– Instrument cluster.
– Programmable memory buttons.
– Volumes, tone.
– Control Display.
– Climate control.
– PDC Park Distance Control.
– Rearview camera.
– MINI Driving Modes.
– Intelligent Safety.
Online Edition for Part no. 01402667273 - VI/19
69
Page 70
CONTROLS Opening and closing
System limits
A clear assignment between the vehicle key
and driver may not be possible in the following cases, for example.
– The passenger unlocks the vehicle with
his or her own vehicle key, but another
person is driving.
– The driver unlocks the vehicle via Com-
fort Access and has multiple vehicle
keys with him or her.
– The driver changes, but the vehicle is
not locked and unlocked.
– Multiple vehicle keys are located out-
side of the vehicle.
Adjusting
General information
Depending on the package and country version, various settings are available for the
vehicle key functions.
These settings are stored for the driver profile, refer to page 69, currently used.
Unlocking
Trunk lid
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
4.
The text next to the symbol indicates
the current setting.
5. Select the desired setting:
– "Tailgate"
Only the trunk lid is unlocked.
– "Tailgate and door(s)"
The trunk lid and the doors are unlocked.
– "Tailgate opens after unlocking"
The vehicle must be unlocked before
the trunk lid can be used with the remote control.
– "Button lock"
It is not possible to use the trunk lid
via the vehicle key.
Depending on the vehicle equipment and
country version, this setting may not be offered.
Doors
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
4. "Driver's door" or "All doors"
5. Select the desired setting:
– "Driver's door only"
Only the driver's door and the fuel
filler flap are unlocked. Pressing
again unlocks the entire vehicle.
– "All doors"
The entire vehicle is unlocked.
70
Online Edition for Part no. 01402667273 - VI/19
Automatic locking
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
4. Select the desired setting:
– "Lock automatically"
The vehicle locks automatically after
a while if no door is opened after unlocking.
– "Lock after starting to drive"
The vehicle locks automatically after
you drive off.
Page 71
Opening and closing CONTROLS
Automatic unlocking
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
4. "Unlock at end of trip"
After the engine is switched off by
pressing the Start/Stop button, the
locked vehicle is automatically unlocked.
Confirmation signals from the
vehicle
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
4. Deactivate or activate the desired con-
firmation signals.
– "Flash for lock/unlock"
Unlocking is signaled by two flashes,
locking by one.
– With alarm system:
"Acoustic signal for lock/unlock"
Unlocking is signaled by one honk of
the horn.
– Changes in the vehicle tilt, for instance,
during attempts at stealing a wheel or
when towing the vehicle.
– Disconnected battery voltage.
– Improper use of the socket for Onboard
Diagnosis.
– Locking the vehicle while a device is
connected to the socket for the OBD On-
board-Diagnosis. For socket for the OBD
Onboard Diagnosis, refer to page 291.
The alarm system signals these changes vis-
ually and acoustically:
– Acoustic alarm:
Depending on local regulations, the
acoustic alarm may be suppressed.
– Visual alarm:
By flashing the exterior lighting.
Overview
Indicator light on the interior mirror.
Alarm system
General information
When the vehicle is locked, the vehicle
alarm system reacts to the following
changes:
– Unauthorized opening of a door, the
hood or the trunk lid.
– Movements in the car's interior.
Online Edition for Part no. 01402667273 - VI/19
Switching on/off
When you unlock and lock the vehicle, either with the vehicle key or via Comfort Access, the alarm system is switched off and
on at the same time.
Opening the doors with the alarm
system switched on
The alarm system is triggered when a door
is opened if the door was unlocked using
the integrated key in the door lock.
71
Page 72
CONTROLS Opening and closing
Switching off the alarm, refer to page 73.
Opening the trunk lid with the
alarm system switched on
The trunk lid can be opened even when the
alarm system is switched on.
After the trunk lid is closed, it is locked and
monitored again provided the doors are
locked. The hazard warning system flashes
once.
Panic mode
You can trigger the alarm system if you find
yourself in a dangerous situation.
– Press the button on the vehicle
key and hold for at least 3 seconds.
– Briefly press the button on the vehicle
key three times in succession.
To switch off the alarm: press any button.
Signals of the indicator light
– The indicator light flashes briefly every
2 seconds:
The alarm system is switched on.
– Indicator light flashes for approx.
10 seconds, then it flashes briefly every
2 seconds:
Interior motion sensor and tilt alarm
sensor are not active, as doors, hood, or
trunk lid are not correctly closed. Correctly closed access points are secured.
When the still open access points are
closed, the interior motion sensor and
tilt alarm sensor will be switched on.
– The indicator light goes out after un-
locking:
The vehicle has not been tampered with.
– The indicator light flashes after unlock-
ing until the engine ignition is switched
on, but no longer than approx. 5 minutes:
An alarm has been triggered.
Tilt alarm sensor
The tilt of the vehicle is monitored.
The alarm system responds in situations
such as attempts to steal a wheel or when
the vehicle is towed.
Interior motion sensor
The car's interior is monitored to the height
of the seats. The alarm system is switched
on together with the interior motion sensor
even when the convertible top is open. Falling objects such as leaves can trigger the
alarm unintentionally.
Avoiding unintentional alarms
General information
The tilt alarm sensor and interior motion
sensor can trigger an alarm, although no unauthorized action occurred.
Possible situations for an unwanted alarm:
– In automatic vehicle washes.
– In duplex garages.
– During transport on trains carrying ve-
hicles, at sea or on a trailer.
– With animals in the vehicle.
– When the vehicle is locked after start of
fueling.
The tilt alarm sensor and the interior motion sensor can be switched off in such situations.
Switching off the tilt alarm sensor and
interior motion sensor
Press the button on the vehicle key
within 10 seconds as soon as the
vehicle is locked.
72
Online Edition for Part no. 01402667273 - VI/19
Page 73
Opening and closing CONTROLS
The indicator light lights up for approx.
2 seconds and then continues to flash.
The tilt alarm sensor and interior motion
sensor are switched off until the vehicle is
locked again.
Switching off the alarm
– Unlock the vehicle with the vehicle key.
– Unlock the vehicle with the integrated
remote control or switch on the ignition
using the emergency detection of remote control, refer to page 64.
– With Comfort Access: if you have the
vehicle key with you, unlock the vehicle
using the button on the driver's side or
passenger side door.
Power windows
General information
If an accident of a certain severity occurs,
the windows are automatically closed except a gap.
Safety information
Overview
Power windows.
Power windows for all windows.
Opening
– Press the switch to the resistance
point.
The window opens while the switch is
being held.
– Press the switch beyond the resist-
ance point.
The window opens automatically. Press-
ing the switch again stops the motion.
Warning
When operating the windows, body parts
and objects can be jammed. There is a risk
of injury or risk of damage to property.
Make sure that the area of movement of
the windows is clear during opening and
closing.
Online Edition for Part no. 01402667273 - VI/19
– Press the switch to the resistance
point.
All side windows open simultaneously
while the switch is being held.
– Press the switch beyond the resist-
ance point.
All side windows automatically open si-
multaneously. Pressing the switch again
stops the motion.
Convenient opening with the vehicle key,
refer to page 61.
73
Page 74
CONTROLS Opening and closing
Closing
– Pull the switch to the resistance
point.
The window closes while the switch is
being held.
– Pull the switch beyond the resist-
ance point.
The window closes automatically if the
door is closed. Pulling the switch again
stops the motion.
– Pull the switch.
All side windows close simultaneously
while the switch is being held.
Convenient closing with the vehicle key, refer to page 62.
Closing via Comfort Access, refer to
page 67.
Jam protection system
Concept
The jam protection prevents objects or body
parts becoming jammed between the door
frame and window while the front windows
are being closed.
General information
If resistance or a blockage is detected while
the front windows are being closed, the
closing action is interrupted.
The window opens slightly.
Safety information
Warning
Accessories on the windows such as antennas can impact jam protection. There is
a risk of injury. Do not install accessories
in the area of movement of the windows.
Closing without the jam protection
system
In case of danger from the outside or if ice
might prevent normal closing, proceed as
follows:
1. Pull the switch past the resistance
point and hold it there.
The window closes with limited jam pro-
tection. If the closing force exceeds a
specific threshold, closing is interrupted.
2. Pull the switch past the resistance
point again within approx. 4 seconds
and hold it there.
The window closes without jam protection.
Malfunction
General information
In certain situations a window can only be
operated to a limited extent.
– After a power failure during the opening
or closing process, the a window can
only be operated to a limited extent. The
system must be initialized in this case.
– The power window motors are equipped
with overheating protection. If a window is opened and closed several times
within a short period of time, the overheating protection switches the motor
off temporarily. Depending on the degree of overheating, it may only be possible to close the window or it may not
be possible to operate it at all.
In this case: allow the power window
motor to cool down.
74
Online Edition for Part no. 01402667273 - VI/19
Page 75
Opening and closing CONTROLS
Initializing the system
The system can be initialized when the vehicle is stationary and the engine is running.
During initialization, the affected window
closes without jam protection.
Warning
When operating the windows, body parts
and objects can be jammed. There is a risk
of injury or risk of damage to property.
Make sure that the area of movement of
the windows is clear during opening and
closing.
1. Open the affected window completely.
2. Pull the switch to the resistance
point and hold.
The window closes.
3. Continue holding the switch pulled
to the resistance point.
The window opens and closes once or
twice after approx. 15 seconds, depending on the vehicle's equipment.
4. Release switch.
Convertible top with integrated sliding sun roof
Overview
Convertible top, sliding sun roof switch
Sliding sun roof
General information
Before closing the sliding sun roof, remove
any foreign objects from the windshield
frame; otherwise, closing may be prevented.
Opening
Press the switch backward,
until the desired position is
reached or the sliding sun roof
is fully open.
Closing
Press the switch forward, until
the desired position is reached
or the sliding sun roof is
closed.
Convertible top
General information
The convertible top can be opened or closed
at speeds up to approx. 18 mph/30 km/h.
Online Edition for Part no. 01402667273 - VI/19
75
Page 76
CONTROLS Opening and closing
If the vehicle is accelerated above a speed
of approx. 18 mph/30 km/h while the
convertible top is being moved, the
convertible top movement stops.
Follow the following information:
– While the convertible top is moving, it
is not possible to open the trunk lid.
– If possible, close the convertible top
when the vehicle is parked. A closed
convertible top protects it from weatherrelated damage and to some extent from
theft.
– Even when the convertible top is closed,
only store valuables in the locked cargo
area or in the locked glove compartment.
– At higher speeds, negative pressure pro-
duced in the car's interior causes the
convertible top to begin to flutter. Increase the air flow via the ventilation to
prevent negative pressure in the vehicle.
– It is not possible to start the engine and
operate the convertible top simultaneously. When the engine is started using
the Start/Stop button or using the Auto
Start/Stop function, the convertible top
movement is briefly interrupted.
– Opening a door interrupts closure of the
convertible top.
– When loading the cargo area, make sure
that the cargo does not push against the
cargo area partition, refer to page 78,
from below.
– In order to protect the battery, move the
convertible top only when the engine is
running if possible.
– Before closing the convertible top, re-
move any foreign objects from the windshield frame; otherwise, closing may be
prevented.
Safety information
NOTICE
Incorrect operation can damage the
convertible top and other parts of the vehicle.
There is a risk of damage to property. During operation, heed the following points:
– Keep the area of movement of the
convertible top clear because the
convertible top swivels out and upward. Maximum area of movement:
78.8 inches/2 meters.
– Fully close the trunk lid.
– Do not leave the convertible top open
for more than a day while it is wet.
– Do not open the convertible top, if it
is wet, covered in snow, iced up, or
dirty.
– Do not place objects on the
convertible top.
– The rollover protection system may
not be triggered.
– Do not operate the convertible top on
uneven sections of road.
– Always open or close the convertible
top completely. The convertible top is
only locked in its end positions.
– Make sure that no objects are on the
cargo cover when opening the
convertible top.
Warning
Body parts can be jammed when opening
and closing the convertible top. There is a
risk of injury. When opening and closing
the convertible top, observe the movement
and keep the area of movement clear.
76
Online Edition for Part no. 01402667273 - VI/19
Page 77
Opening and closing CONTROLS
Warning
When operating the convertible top while
driving, the view to the rear may be limited. At speeds above 20 mph/30 km/h the
convertible top stops in its current position. There is a danger of accidents and
property damage. When operating the
convertible top while driving, observe traffic attentively and, if necessary, reduce
speed. Do not operate while backing up or
in windy weather.
Warning
The convertible top is not suitable for the
mounting of roof carrier systems. The roof
carrier could come loose. There is a risk of
accident. Do not attach any roof carrier
systems to the convertible top.
Warning
A convertible top that is not completely
open or closed is not locked and can open
by itself while driving due to the airstream. There is a risk of injury or risk of
damage to property. Make sure that the
convertible top is always completely open
or closed.
Functional requirements
The following requirements must be fulfilled in order to be able to move the
convertible top.
– The ignition or radio-ready state must
be switched on.
– The cargo area partition, refer to
page 78, is stored and latched in the
bottom position.
– The trunk lid is closed.
– The external temperature is above
14 ℉/-10 ℃.
– The voltage of the vehicle electrical sys-
tem is sufficient.
– The convertible top drive is not over-
heating.
– Vehicle speed is below
18 mph/30 km/h.
– The windows can be lowered.
If one of these requirements is not met, a
check control message is displayed.
Operating from the inside
Opening
Press the switch backward
and hold until the sliding sunroof is open.
Press the switch backward
again and hold. The windows
roll down and the convertible top opens
while the switch is being pushed. After the
convertible top is completely open, the
switch can be held or pressed again briefly
in order to raise the windows.
Closing
Push the switch forward and
hold. The windows are low-
ered, the convertible top is
closed and the windows are
raised again while the switch
is being held.
Preventing an interruption
Press and hold the switch, until the
convertible top is fully open or closed. A
Check Control message is displayed when
the opening procedure has finished.
The convertible top movement is interrupted if the switch is released. The se-
Online Edition for Part no. 01402667273 - VI/19
77
Page 78
CONTROLS Opening and closing
quence can be continued in the desired direction using the switch.
Operate switch again until the convertible
operation is terminated.
Operation from the outside
When equipped with Comfort Access the
convertible top can also be operated from
outside.
– Convenient opening, refer to page 61,
with the vehicle key.
– Convenient closing, refer to page 62,
with the vehicle key.
– Closing via Comfort Access, refer to
page 66.
Cargo area partition
With the convertible top closed, the cargo
area volume can be expanded.
Expanding the cargo area volume, refer to
page 210.
Wind deflector
Concept
The wind deflector reduces the air movement in the car's interior when driving with
the convertible top down.
Safety information
NOTICE
When moving the front seats back, the
wind deflector can be damaged. There is a
risk of damage to property. Make sure that
the area of movement is clear prior to
moving the front seats back.
Warning
Body parts can be jammed when operating
the wind deflector. There is a risk of injury. Make sure that the area of movement
around the wind deflector is clear when installing and removing it and folding it up.
Warning
Objects placed on the installed wind deflector can be thrown into the car's interior or endanger other traffic participants,
for instance in case of an accident, braking
or evasive maneuver. The objects can damage the wind deflector. There is a risk of
injury or risk of damage to property. Do
not place any objects on the installed wind
deflector.
Warning
Operating the wind deflector while driving
can distract from the surrounding traffic.
There is a risk of accident. Operate the
wind deflector only when the vehicle is
stationary.
Installing
The wind deflector is located in a protective
jacket in the cargo area.
To protect the head restraints from damage,
slide the rear head restraints into the upper
position prior to installation and removal.
1. Take the wind deflector out of the pro-
tective jacket.
78
Online Edition for Part no. 01402667273 - VI/19
Page 79
Opening and closing CONTROLS
Fully unfold the wind deflector so that
the handle, arrow 1, folds down and
locks the wind deflector.
2. Open the rear side window, if necessary.
Insert wind deflector from one side of
the vehicle with the pins in the corresponding fixing points on the opposite
side of the vehicle.
Press the wind deflector downward,
while inserting the pins in the corresponding fixing points, arrows 2.
5. Press the wind deflector downward in
the middle, until the handle engages, arrows 1.
Grasp the inner framework of the wind
deflector and fold it up, arrow 2.
3. To release the lock, fold the handle up
and hold it.
4. Press the wind deflector inwardly and
up, arrow 1, to the extent that the wind
deflector can be positioned in front of
the fixing points on the installation side.
Release the handle.
Online Edition for Part no. 01402667273 - VI/19
Removing
1. Fold the handle up to unlock it.
2. Proceed in reverse order to remove the
wind deflector.
79
Page 80
CONTROLS Seats, mirrors, and steering wheel
Seats, mirrors, and steering wheel
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with
the series. It also describes features that are
not necessarily available in your vehicle, for
instance, due to the selected options or
country versions. This also applies to safetyrelated functions and systems. When using
these functions and systems, the applicable
laws and regulations must be observed.
Sitting safely
An ideal seating position that meets the
needs of the occupants can make a vital
contribution to relaxed, fatigue-free driving.
In the event of an accident, the correct seating position plays an important role. Follow
the information in the following chapters:
– Seats, refer to page 80.
– Safety belts, refer to page 82.
– Head restraints, refer to page 84.
– Airbags, refer to page 141.
Warning
With a backrest inclined too far to the
rear, the efficacy of the safety belt can no
longer be ensured. There is a risk of sliding under the safety belt in an accident.
There is a risk of injuries or danger to life.
Adjust the seat prior to starting the trip.
Adjust the backrest so that it is in the
most upright position as possible and do
not adjust again while driving.
Warning
There is a risk of jamming when moving
the seats. There is a risk of injury or risk
of damage to property. Make sure that the
area of movement of the seat is clear prior
to any adjustment.
Adjusting seats
Overview
Front seats
Safety information
Warning
Seat adjustments while driving can lead to
unexpected movements of the seat. Vehicle control could be lost. There is a risk of
accident. Only adjust the seat on the driver's side when the vehicle is stationary.
80
Online Edition for Part no. 01402667273 - VI/19
1 Forward/backward
2 Thigh support
3 Height
4 Backrest tilt
Page 81
Seats, mirrors, and steering wheel CONTROLS
Forward/backward
Pull the lever and slide the seat in the desired direction.
After releasing the lever, move the seat forward or back slightly making sure it engages properly.
Height
Lumbar support
The curvature of the seat backrest can be
adjusted in a way that it supports the lumbar region of the spine. The lower back and
the spine are supported for upright posture.
Turn the wheel in order to increase or decrease the curvature.
Thigh support
Pull the lever up or press it down as often as
needed to reach the desired height.
Backrest tilt
Pull the lever, and apply your weight to the
backrest or lift it off, as necessary.
Online Edition for Part no. 01402667273 - VI/19
Pull the lever at the front of the seat and adjust the thigh support.
Entering the rear
Safety information
Warning
There is a risk of jamming when moving
the seats. There is a risk of injury or risk
of damage to property. Make sure that the
area of movement of the seat is clear prior
to any adjustment.
81
Page 82
CONTROLS Seats, mirrors, and steering wheel
Front seat heating
Warning
Unexpected movements of the rear seat
backrest while driving may occur if the
rear seat backrest is unlocked. Vehicle
control could be lost. There is a risk of injury. Fold back and lock the rear seat backrests before driving.
Overview
Fold the rear seat backrest down
1. Pull lever up to the stop.
Seat heating
Switching on
Press the button once for each temperature level.
The maximum temperature is reached when
three LEDs are lit.
2. Fold the rear seat backrest forward.
3. Push the seat forward.
Original position
The driver's seat features a mechanical
memory function for forward/back and
backrest adjustment.
1. Push the seat back into the original po-
sition.
2. Fold back the backrest to lock the seat.
If the backrest is folded back when the seat
is not yet in the original position, the seat
engages in the current position. In this
case, manually adjust longitudinal direction,
refer to page 81.
If the trip is continued within approx.
15 minutes after a stop, seat heating is activated automatically with the temperature
selected last.
When GREEN Mode is activated, refer to
page 220, the heating output is reduced.
Switching off
Press and hold the button until the
LEDs go out.
Safety belts
Number of safety belts and safety
belt buckles
The vehicle is fitted with four safety belts
to ensure occupant safety. However, they
can only offer protection when adjusted correctly.
82
Online Edition for Part no. 01402667273 - VI/19
Page 83
Seats, mirrors, and steering wheel CONTROLS
General information
Always make sure that safety belts are being worn by all occupants before driving off.
Although airbags enhance safety by providing added protection, they are not a substitute for safety belts.
The upper shoulder strap's anchorage point
will be correct for adult seat occupants of
every build if the seat is correctly adjusted.
Safety information
Warning
Use of a safety belt to buckle more than
one person will potentially defeat the ability of the safety belt to serve its protective
function. There is a risk of injuries or danger to life. Do not allow more than one person to wear a single safety belt. Infants
and children are not allowed on an occupant's lap, but must be transported and secured in designated child restraint systems.
Warning
The efficacy of safety gear, including
safety belts, can be limited or lost when
safety belts are fastened incorrectly. An
incorrectly fastened safety belt can cause
additional injuries, for instance in the
event of an accident or during braking and
evasive maneuvers. There is a risk of injuries or danger to life. Make sure that all
occupants are wearing safety belts correctly.
– The safety belts or safety belt buckles
are damaged, soiled, or changed in
any other way.
– Belt tensioners or belt retractors
were modified.
Safety belts can be imperceptibly damaged
in the event of an accident. There is a risk
of injuries or danger to life. Do not modify
safety belts, safety belt buckles, belt tensioners, belt retractors or belt anchors and
keep them clean. Have the safety belts
checked after an accident at the dealer’s
service center or another qualified service
center or repair shop.
Correct use of safety belts
– Wear the safety belt twist-free and tight
to your body over your lap and shoulders.
– Wear the safety belt deep on your hips
over your lap. The safety belt may not
press on your stomach.
– Do not rub the safety belt against sharp
edges, or guide it or jam it in across
hard or fragile objects.
– Avoid thick clothing.
– Re-tighten the safety belt frequently up-
ward around your upper body.
Buckling the safety belt
1. Guide the safety belt slowly over
shoulder and hip to put it on.
Warning
The efficacy of safety gear, including
safety belts, may not be fully functional or
fail in the following situations:
Online Edition for Part no. 01402667273 - VI/19
83
Page 84
CONTROLS Seats, mirrors, and steering wheel
2. Insert the tongue plate into the safety
belt buckle. The safety belt buckle must
engage audibly.
Unbuckling the safety belt
1. Hold the safety belt firmly.
2. Press the red button in the belt buckle.
3. Guide the safety belt back into its roll-
up mechanism.
Belt loop
vated if objects are placed on the front passenger seat.
Front head restraints
Safety information
Warning
A missing protective effect due to removed or not correctly adjusted head restraints can cause injuries in the head and
neck area. There is a risk of injury.
– Before driving, install the removed
head restraints on the occupied seats.
– Adjust the head restraint so its center
supports the back of the head at as
close to eye level as possible.
– Adjust the distance so that the head
restraint is as close as possible to the
back of the head. Adjust the distance
via the backrest tilt as needed.
When fastening the safety belts on the rear
seats, make sure that the belt loop is closed.
Safety belt reminder for driver's
seat and front passenger seat
Display in the instrument cluster
The indicator light lights up and a
signal sounds. Make sure that the
safety belts are positioned correctly.
The safety belt reminder can also be acti-
84
Online Edition for Part no. 01402667273 - VI/19
Warning
Body parts can be jammed when moving
the head restraint. There is a risk of injury.
Make sure that the area of movement is
clear when moving the head restraint.
Warning
Objects on the head restraint reduce the
protective effect in the head and neck
area. There is a risk of injury.
– Do not use seat or head restraint cov-
ers.
– Do not hang objects, for instance
clothes hangers, directly on the head
restraint.
Page 85
Seats, mirrors, and steering wheel CONTROLS
– Only use accessories that have been
determined to be safe for attachment
to a head restraint.
– Do not use any accessories, for in-
stance pillows, while driving.
Adjusting the height: John Cooper
Works sport seat
The height of the head restraints cannot be
adjusted.
Adjusting the height
1. If necessary, fold the rear seat backrest
forward.
2. Pull head restraint up as far as possible.
3. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the
head restraint.
Rear head restraints
– To lower: press the button, arrow 1, and
push the head restraint down.
– To raise: push the head restraint up.
After setting the height, make sure that the
head restraint engages correctly.
Removing: John Cooper Works
sport seat
The head restraints cannot be removed.
Removing
Only remove the head restraint if no one
will be sitting in the seat in question.
Online Edition for Part no. 01402667273 - VI/19
Safety information
Warning
A missing protective effect due to removed or not correctly adjusted head restraints can cause injuries in the head and
neck area. There is a risk of injury.
– Before driving, install the removed
head restraints on the occupied seats.
– Adjust the head restraint so its center
supports the back of the head at as
close to eye level as possible.
– Adjust the distance so that the head
restraint is as close as possible to the
back of the head. Adjust the distance
via the backrest tilt as needed.
85
Page 86
CONTROLS Seats, mirrors, and steering wheel
Removing
Warning
Body parts can be jammed when moving
the head restraint. There is a risk of injury.
Make sure that the area of movement is
clear when moving the head restraint.
Warning
Objects on the head restraint reduce the
protective effect in the head and neck
area. There is a risk of injury.
– Do not use seat or head restraint cov-
ers.
– Do not hang objects, for instance
clothes hangers, directly on the head
restraint.
– Only use accessories that have been
determined to be safe for attachment
to a head restraint.
– Do not use any accessories, for in-
stance pillows, while driving.
Only remove the head restraint if no one
will be sitting in the seat in question.
1. Fold down the rear seat backrest, refer
to page 209, in question.
2. Pull head restraint up against the resist-
ance.
3. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the
head restraint.
Adjusting the height
– To lower: press the button, arrow 1, and
push the head restraint down.
– To raise: push the head restraint up.
After setting the height, make sure that the
head restraint engages correctly.
86
Online Edition for Part no. 01402667273 - VI/19
Mirrors
Exterior mirrors
General information
The mirror on the front passenger side is
more curved than the driver's side mirror.
Safety information
Warning
Objects reflected in the mirror are closer
than they appear. The distance to the traffic behind could be incorrectly estimated,
for instance while changing lanes. There is
a risk of accident. Estimate the distance to
Page 87
Seats, mirrors, and steering wheel CONTROLS
the traffic behind by looking over your
shoulder.
Overview
1 Adjusting
2 Selecting a mirror, Automatic Curb Mon-
itor
3 Folding in and out
Selecting a mirror
To change over to the other mirror:
Slide the switch.
Adjusting electrically
Press the button.
The mirror movement follows the
button movement.
Malfunction
In case of an electrical malfunction, adjust
the mirror by pressing the edges of the mir-
ror glass.
Folding in and out
NOTICE
Depending on the vehicle width, the vehicle can be damaged in vehicle washes.
There is a risk of damage to property. Before washing, fold in the mirrors by hand
or with the button.
Press the button.
Folding is only possible up to a speed of approx. 15 mph/20 km/h.
Folding the mirrors in and out is helpful in
the following situations:
– In vehicle washes.
– On narrow roads.
Mirrors that were folded in are folded out
automatically at a speed of approx.
25 mph/40 km/h.
Automatic heating
Both exterior mirrors are automatically
heated as needed and when the ignition is
switched on.
Automatic dimming feature
The exterior mirror on the driver's side is
automatically dimmed. Photocells in the
car's interior mirror, refer to page 88, are
used to control this.
Automatic Curb Monitor, exterior
mirror
Concept
If reverse gear is engaged, the mirror glass
on the front passenger side is tilted downward. This improves your view of the curb
and other formatting issue - low-lying obstacles when parking, for instance.
Online Edition for Part no. 01402667273 - VI/19
87
Page 88
CONTROLS Seats, mirrors, and steering wheel
Activating
1. slide the switch to the driver's
side mirror position.
2. Engage selector lever position R.
Deactivating
Slide the switch to the passenger's side mirror position.
Interior mirror, manually dimmable
Flip lever
To reduce the blinding effect of the interior
mirror, flip the lever forward.
Turn knob
Interior mirror, automatic dimming
feature
Overview
Photocells are used for control:
– In the mirror glass.
– On the back of the mirror.
Functional requirements
– Keep the photocells clean.
– Do not cover the area between the inte-
rior mirror and the windshield.
Steering wheel
Safety information
Turn the knob to reduce the blinding effect
by the interior mirror.
88
Online Edition for Part no. 01402667273 - VI/19
Warning
Steering wheel adjustments while driving
can lead to unexpected steering wheel
movements. Vehicle control could be lost.
There is a risk of accident. Adjustng the
steering wheel while the vehicle is stationary only.
Page 89
Seats, mirrors, and steering wheel CONTROLS
Adjusting
1. Fold the lever down.
2. Move the steering wheel to the prefer-
red height and angle to suit your seating
position.
3. Fold the lever back up.
Online Edition for Part no. 01402667273 - VI/19
89
Page 90
CONTROLS Transporting children safely
Transporting children safely
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with
the series. It also describes features that are
not necessarily available in your vehicle, for
The right place for children
Safety information
Warning
Unattended children or animals in the vehicle can cause the vehicle to move and
endanger themselves and traffic, for instance due to the following actions:
– Pressing the Start/Stop button.
– Releasing the parking brake.
– Opening and closing the doors or
windows.
– Engaging selector lever position N.
– Using vehicle equipment.
There is a risk of accidents or injuries. Do
not leave children or animals unattended
in the vehicle. Take the vehicle key with
you when exiting and lock the vehicle.
Always transport children in the
rear seat
General information
Accident research shows that the safest
place for children is in the rear seat.
Transport children younger than 13 years of
age or shorter than 5 ft/150 cm only in the
rear seat in suitable child restraint systems
designed for the age, weight and size of the
instance, due to the selected options or
country versions. This also applies to safetyrelated functions and systems. When using
these functions and systems, the applicable
laws and regulations must be observed.
child. Children 13 years of age or older must
wear a safety belt as soon as a suitable child
restraint system can no longer be used due
to their age, weight, or size.
Safety information
Warning
The safety belt cannot be fastened correctly on children shorter than 5 ft,
150 cm without suitable additional child
restraint systems. The efficacy of safety
gear, including safety belts, can be limited
or lost when safety belts are fastened incorrectly. An incorrectly fastened safety
belt can cause additional injuries, for instance in the event of an accident or during braking and evasive maneuvers. There
is a risk of injuries or danger to life. Secure children shorter than 5 ft, 150 cm using suitable child restraint systems.
Children on the front passenger
seat
General information
Before using a child restraint system on the
front passenger seat, ensure that the front,
knee, and side airbags on the front passenger side are deactivated. For automatic de-
90
Online Edition for Part no. 01402667273 - VI/19
Page 91
Transporting children safely CONTROLS
activation of front-seat passenger airbags,
refer to page 143.
Safety information
Warning
Active front-seat passenger airbags can injure a child in a child restraint system
when the airbags are activated. There is a
risk of injury. Make sure that the frontseat passenger airbags are deactivated and
that the PASSENGER AIRBAG OFF indicator light lights up.
Warning
The stability of the child restraint system
is limited or compromised with incorrect
seat adjustment or improper installation of
the child seat. There is a risk of injuries or
danger to life. Make sure that the child restraint system fits securely against the
backrest. If possible, adjust the backrest
tilt for all affected backrests and correctly
adjust the seats. Make sure that seats and
backrests are securely engaged or locked.
If possible, adjust the height of the head
restraints or remove them.
Installing child restraint systems
General information
Pay attention to the specifications of the
child restraint system manufacturer when
selecting, installing, and using child restraint systems.
In order to facilitate the installation of a
back-facing child restraint system in the
rear:
Move the front passenger seat as far up as
possible before folding down the backrest.
Safety information
Warning
The protective effect of child restraint systems and their fastening systems which
have been damaged or exposed to an accident can be limited or lost. A child cannot
be properly restrained in the event of an
accident or braking and evasive maneuvers. There is a risk of injuries or danger
to life.
Do not use child restraint systems which
have been damaged or exposed to an accident.
If a child restraint system and its fastening system has been damaged or exposed
to an accident, have these systems
checked and replaced by the dealer's service center or another qualified service center or repair shop.
Warning
The stability of the child restraint system
is limited or compromised with incorrect
seat adjustment or improper installation of
the child seat. There is a risk of injuries or
danger to life. Make sure that the child restraint system fits securely against the
backrest. If possible, adjust the backrest
tilt for all affected backrests and correctly
adjust the seats. Make sure that seats and
backrests are securely engaged or locked.
If possible, adjust the height of the head
restraints or remove them.
On the rear seats
In order to facilitate the installation of a
back-facing child restraint system:
Online Edition for Part no. 01402667273 - VI/19
91
Page 92
CONTROLS Transporting children safely
Move the front passenger seat as far up as
possible before folding down the backrest.
On the front passenger seat
Deactivating airbags
Warning
Active front-seat passenger airbags can injure a child in a child restraint system
when the airbags are activated. There is a
risk of injury. Make sure that the frontseat passenger airbags are deactivated and
that the PASSENGER AIRBAG OFF indicator light lights up.
Before installing a child restraint system in
the front passenger seat, make sure that the
front, knee and side airbags on the front
passenger side are deactivated.
Deactivate the front-seat passenger airbags
automatically, refer to page 143.
Seat position and height
Before installing a child restraint system,
move the front passenger seat as far back as
possible and adjust its height to the highest
and thus best possible position for the belt
and to offer optimal protection in the event
of an accident.
If the upper anchorage of the safety belt is
located in front of the belt guide of the child
seat, move the front passenger seat carefully forward until the best possible belt
guide position is reached.
Child seat security
The rear safety belts and the front passenger safety belt can be permanently locked to
fasten child restraint systems.
Locking the safety belt
1. Pull out the belt strap completely.
2. Secure the child restraint system with
the safety belt.
3. Allow the belt strap to be pulled in and
pull it tight against the child restraint
system. The safety belt is locked.
Unlocking the safety belt
1. Unbuckle the safety belt buckle.
2. Remove the child restraint system.
3. Allow the belt strap to be pulled in com-
pletely.
LATCH child restraint fixing system
General information
LATCH: Lower Anchors and Tether for Children.
Pay attention to the operating and safety information from the child restraint system
manufacturer when installing and using
LATCH child restraint fixing systems.
92
Online Edition for Part no. 01402667273 - VI/19
Page 93
Transporting children safely CONTROLS
Mounts for the lower LATCH
anchors
The lower anchors may be used to attach
the CRS to the vehicle seat up to a combined child and CRS weight of 65 lbs/30 kg
when the child is restrained by the internal
harnesses.
Safety information
Warning
If the LATCH child restraint fixing systems are not correctly engaged, the protective effect of the LATCH child restraint
fixing system can be limited. There is a
risk of injuries or danger to life. Make sure
that the lower anchors are securely engaged and that the LATCH child restraint
fixing system fits securely against the
backrest.
Position
Symbol Meaning
The corresponding symbol
shows the mounts for the
lower LATCH anchors.
Seats equipped with lower
anchors are marked with a
pair, (2), of LATCH symbols.
2. Ensure that both LATCH anchors are
properly connected.
Upper LATCH retaining strap
For Canadian customers only.
The following statement is required by
Transport Canada:
This vehicle is not equipped with user-
ready tether anchorages. As such neither a
child restraint system, nor a booster cushion, requiring the use of a tether strap can
be properly secured in the vehicle.
Before installing LATCH child
restraint fixing systems
Pull the safety belt away from the area of
the child restraint system.
Assembly of LATCH child restraint
fixing systems
1. Install child restraint system, see manu-
facturer's information.
Online Edition for Part no. 01402667273 - VI/19
93
Page 94
CONTROLS Driving
Driving
Vehicle features and options
This chapter describes all standard, countryspecific and optional features offered with
the series. It also describes features that are
not necessarily available in your vehicle, for
instance, due to the selected options or
country versions. This also applies to safetyrelated functions and systems. When using
these functions and systems, the applicable
laws and regulations must be observed.
Start/Stop button
Concept
Pressing the Start/Stop button
switches the ignition on or off
and starts the engine.
Steptronic transmission: the
engine starts in selector lever
position P or N with the brake pedal pressed
when you press the Start/Stop button.
Manual transmission: the engine starts with
the clutch pedal pressed when the Start/
Stop button is pressed.
Ignition on
Manual transmission: press the Start/Stop
button without stepping on the clutch
pedal.
Steptronic transmission: press the Start/
Stop button, but do not press on the brake
pedal at the same time.
All vehicle systems are ready for operation.
Most of the indicator/warning lights in the
instrument cluster light up for a varied
length of time.
To save battery power when the engine is
off, switch off the ignition and any unnecessary electronic systems/power consumers.
Ignition off
Manual transmission: press the Start/Stop
button again without stepping on the clutch
pedal.
Steptronic transmission: shift to selector
lever position P, press the Start/Stop button
again without stepping on the brake.
All indicator lights in the instrument cluster
go out.
To save battery power when the engine is
off, switch off the ignition and any unnecessary electronic systems/power consumers.
Safety measures
The ignition is switched off automatically in
the following situations while the vehicle is
stationary and the engine is off:
– When locking the vehicle, even if the
low beams are switched on.
– Shortly before the battery is discharged
completely, so that the engine can still
be started. This function is only available when the low beams are switched
off.
– When opening or closing the driver
door, if the driver's safety belt is unbuckled and the low beams are switched
off.
– While the driver's safety belt is unbuck-
led with driver's door open and low
beams off.
– When the front doors are opened if
there is no other person sitting in the
front seats.
94
Online Edition for Part no. 01402667273 - VI/19
Page 95
Driving CONTROLS
– The low beams switch to parking lights
after some minutes of no use.
Steptronic transmission with a tap-operated
selector lever, refer to page 109: when
switching off the ignition, the selector lever
position P is engaged automatically if the
selector lever position R, D or M/S is engaged.
Radio-ready state
General information
In the radio-ready state, certain power consumers remain ready for operation.
Activating
With the engine running, press the Start/
Stop button.
If the engine is not running and the ignition
is switched on: the system automatically activates radio-ready state when the door is
opened if the lights are switched off or the
daytime running lights are switched on.
Radio-ready state remains active if, for instance the ignition is automatically
switched off for the following reasons:
– Opening or closing the driver's door.
– Unfastening of the driver's safety belt.
– When automatically switching from low
beams to parking lights.
Switching off automatically
The radio-ready state is switched off automatically in the following situations:
– If the driver's or front passenger door is
opened when exiting the vehicle, with
the engine switched off manually.
– If the ignition is switched off manually
with the Start/Stop button.
– After approx. 8 minutes.
– When the vehicle is locked using the
central locking system.
– Shortly before the battery is discharged
completely, so that the engine can still
be started.
Starting the engine
Safety information
DANGER
If the exhaust pipe is blocked or ventilation is insufficient, harmful exhaust gases
can enter into the vehicle. The exhaust
gases contain pollutants which are colorless and odorless. In enclosed areas, exhaust gases can also accumulate outside of
the vehicle. There is danger to life. Keep
the exhaust pipe free and ensure sufficient
ventilation.
Warning
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of
accident. Before exiting, secure the vehicle against rolling.
In order to ensure that the vehicle is secured against rolling away, follow the following:
– Set the parking brake.
– On uphill grades or on a downhill
slope, turn the front wheels in the direction of the curb.
– On uphill grades or on a downhill
slope, also secure the vehicle, for instance with a wheel chock.
NOTICE
In the case of repeated starting attempts
or repeated starting in quick succession,
the fuel is not burned or is inadequately
burned. The catalytic converter can over-
Online Edition for Part no. 01402667273 - VI/19
95
Page 96
CONTROLS Driving
heat. There is a risk of damage to property.
Avoid repeated starting in quick succession.
Gasoline engine
Depending on the motorization, the full
drive power may not be available for approximately 30 seconds after starting the
engine. In this case, the vehicle will not accelerate as usual.
Steptronic transmission
Starting the engine
1. Depress the brake pedal.
2. Engage selector lever position P or N.
3. Press the Start/Stop button.
The ignition is activated automatically for a
brief time and is stopped as soon as the engine starts.
Manual transmission
Starting the engine
1. Depress the brake pedal.
2. Press on the clutch pedal and shift to
neutral.
3. Press the Start/Stop button.
The ignition is activated automatically for a
brief time and is stopped as soon as the engine starts.
Engine stop
Safety information
Warning
Unattended children or animals in the vehicle can cause the vehicle to move and
endanger themselves and traffic, for instance due to the following actions:
– Pressing the Start/Stop button.
– Releasing the parking brake.
– Opening and closing the doors or
windows.
– Engaging selector lever position N.
– Using vehicle equipment.
There is a risk of accidents or injuries. Do
not leave children or animals unattended
in the vehicle. Take the vehicle key with
you when exiting and lock the vehicle.
Warning
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of
accident. Before exiting, secure the vehicle against rolling.
In order to ensure that the vehicle is secured against rolling away, follow the following:
– Set the parking brake.
– On uphill grades or on a downhill
slope, turn the front wheels in the di-
rection of the curb.
– On uphill grades or on a downhill
slope, also secure the vehicle, for in-
stance with a wheel chock.
96
Online Edition for Part no. 01402667273 - VI/19
Page 97
Driving CONTROLS
Steptronic transmission
Switching off the engine
1. When the vehicle is stationary, apply
the parking brake.
2. Engage selector lever position P.
3. Press the Start/Stop button.
The engine is switched off.
The radio-ready state is switched on.
Manual transmission
Switching off the engine
1. With the vehicle at a standstill, press
the Start/Stop button.
The engine is switched off.
The radio-ready state is switched on.
2. Shift into first gear or reverse.
3. Set the parking brake.
Auto Start/Stop function
Concept
The Auto Start/Stop function helps save
fuel. The system switches off the engine
during a stop, for instance in traffic congestion or at traffic lights. The ignition remains
switched on. The engine starts automatically for driving off.
After each engine start using the Start/Stop
button, the Auto Start/Stop function is
ready and is activated at speeds faster than
about 3 mph/5 km/h.
Depending on the selected driving mode, refer to page 164, the system is automatically
activated or deactivated.
Engine stop
Functional requirements
The engine is switched off automatically
during a stop under the following conditions:
Manual transmission:
– Neutral is engaged and the clutch pedal
is not pressed.
– The driver's safety belt is buckled or the
driver's door is closed.
Steptronic transmission:
– The selector lever is in selector lever po-
sition D.
– The brake pedal remains depressed
while the vehicle is stopped.
– The driver's safety belt is buckled or the
driver's door is closed.
In order to be able to release the brake
pedal, engage the selector lever in position
P. The engine remains off.
To continue driving depress the brake
pedal. When a gear is engaged, the engine
starts automatically.
The air flow from the air conditioner is reduced when the engine is switched off.
Steptronic transmission: manual
engine stop
Depending on the vehicle equipment and
country version, the engine can be switched
off manually, if the engine was not switched
off automatically when the vehicle stopped:
– Press the brake pedal forcefully again
from the current pedal position.
– Engage selector lever position P.
If all functional preconditions are fulfilled,
the engine switches off.
Online Edition for Part no. 01402667273 - VI/19
97
Page 98
CONTROLS Driving
Displays in the instrument cluster
The display indicates that the
Auto Start/Stop function is
ready for an Automatic engine
start.
The display indicates that the
conditions for an automatic
engine stop have not been
met.
Functional limitations
The engine is not switched off automatically
in the following situations:
– External temperature too low.
– The external temperature is high and au-
tomatic climate control is running.
– The car's interior has not yet been
heated or cooled to the required level.
– The engine is not yet at operating tem-
perature.
– The wheels are at a sharp angle or the
steering wheel is being turned.
– After driving in reverse.
– Fogging of the windows when the auto-
matic climate control is switched on.
– The vehicle battery charge is very low.
– At higher elevations.
– The hood is unlocked.
– The parking assistant is activated.
– Stop-and-go traffic.
– Selector lever in selector lever position
R, N or M/S.
Starting the engine
The engine starts automatically under the
following conditions:
– Manual transmission: clutch pedal is
pressed.
– Steptronic transmission: by releasing
the brake pedal.
After the engine starts, accelerate as usual.
Safety mode
After the engine switches off automatically,
it will not start again automatically if any
one of the following conditions are met:
– The driver's safety belt is unbuckled and
the driver's door is open.
– The hood was unlocked.
Some indicator lights light up for a varied
length of time.
The engine can only be started via the
Start/Stop button.
Functional limitations
Even if driving off was not intended, the deactivated engine starts up automatically in
the following situations:
– Excessive warming of the car's interior
when the air conditioning is switched
on.
– The steering wheel is turned.
– Steptronic transmission: change from
selector lever position D to R, N or M/S.
– Steptronic transmission: change from
selector lever position P to R, N, D or
M/S.
– The vehicle begins rolling.
– Fogging of the windows when the auto-
matic climate control is switched on.
– The vehicle battery charge is very low.
– Excessive cooling of the car's interior
when the heating is switched on.
– Manual transmission: low brake vacuum
pressure; this can occur, for instance if
the brake pedal is depressed a number
of times in succession.
98
Online Edition for Part no. 01402667273 - VI/19
Page 99
Driving CONTROLS
Intelligent Auto Start/Stop function
Depending on the vehicle equipment and
country-specific version, the vehicle features a variety of sensors for assessing the
traffic situation. The Intelligent Auto Start/
Stop function uses this information to adapt
to various traffic situations in a proactive
manner.
For instance, this applies to the following
situations:
– If a situation is detected in which the
stopping time is expected to be very
short, the engine is not switched off automatically. A message appears on the
Control Display, depending on the situation.
– If a situation is detected in which the
vehicle needs to drive off immediately,
the engine is started automatically.
The function may be restricted if the navigation data is invalid, outdated or not available, for example.
Switching the system on/off
Using the button
The engine can only be stopped or
started via the Start/Stop button.
– LED goes out: auto Start/Stop function
is activated.
Switching off the vehicle during an
automatic engine stop
During an automatic engine stop, the vehi-
cle can be switched off permanently, for in-
stance when leaving it.
Steptronic transmission:
1. Engage selector lever position P.
2. Press the Start/Stop button. The ignition
is switched off. The Auto Start/Stop
function is deactivated.
3. Set the parking brake.
Manual transmission:
1. Press the Start/Stop button. The ignition
is switched off. The Auto Start/Stop
function is deactivated.
2. Shift into first gear or reverse.
3. Set the parking brake.
Engine start as usual via Start/Stop button.
Automatic deactivation
In certain situations, the Auto Start/Stop
function is deactivated automatically for
safety reasons, for instance if no driver is
detected.
Press the button.
– LED comes on: auto Start/Stop function
is deactivated.
The engine is started during an auto-
matic engine stop.
Online Edition for Part no. 01402667273 - VI/19
Malfunction
The Auto Start/Stop function no longer
switches off the engine automatically. A
Check Control message is displayed. It is
possible to continue driving. Have the system checked by a dealer's service center or
another qualified service center or repair
shop.
99
Page 100
CONTROLS Driving
Parking brake
Safety information
Warning
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of
accident. Before exiting, secure the vehicle against rolling.
In order to ensure that the vehicle is secured against rolling away, follow the following:
– Set the parking brake.
– On uphill grades or on a downhill
slope, turn the front wheels in the direction of the curb.
– On uphill grades or on a downhill
slope, also secure the vehicle, for instance with a wheel chock.
Applying
The lever automatically engages after being
pulled up.
The indicator light lights up red. The
parking brake is set.
Lower light: indicator light in Canadian models
Releasing
Raise lever slightly, press the button and
guide the lever down.
Turn signal, high beams, headlight flasher
Turn signal
Using turn signals
If for once use during driving is required,
engage the parking brake slightly and hold
the button down.
To prevent corrosion and one-sided brake
action, lightly apply the parking brake periodically while coasting, if traffic conditions
permit.
The brake lights will not light up if the parking brake is set.
100
Online Edition for Part no. 01402667273 - VI/19
Press the lever past the resistance point.
Canada: the lever returns into its starting
position after actuation. To switch off manually, slightly tap the lever to the resistance
point.
Triple turn signal activation
Lightly tap the lever up or down.
The triple turn signal duration can be ad-
justed.
Loading...