MINEW TECHNOLOGIES G1 User Manual

BLE 5.0 & WiFi Gateway Specification

BLE WiFi Gateway

Model: G1

Version: V1.3.2

Contents

Contents ...................................................................................................................................... 1

1.Overview ................................................................................................................................... 2

2.Features .................................................................................................................................... 3

3.Typical Application .................................................................................................................... 3

4.Outside View ............................................................................................................................ 4

5.Electronic Parameters ............................................................................................................... 5

Email: [e-mail] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 1

BLE 5.0 & WiFi Gateway Specification

1. Overview

G1 is a Bluetooth 5.0 low energy (BLE) to Wi-Fi connectivity gateway without the uses of smartphones or
apps. The G1 gateway collects the data from iBeacon, Eddystone, BLE sensor and other BLE devices, and
then sends to the local server or remote cloud server by HTTPs / MQTT/mbed (ARM) protocol with SSL
and TLS certification over Wi-Fi / Ethernet / Cellular. The subsequent version G1 Gateway will also
implement the connection with BLE devices. This product is a science fiction with a color lamp ring on
the top. It can be fixed by sticker or screw thread.

Outside View

Internal Structure

Email: [e-mail] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 2

BLE 5.0 & WiFi Gateway Specification

2. Features

General:

● 1A @ DC 5.0V input, micro-USB

● 10/100 Ethernet, POE (802.3af)

● Firmware upgrade OTA

● Multiple data transportation protocols

Local server: TCP / UDP

Remote serer / Cloud: HTTP/MQTT/mbed(ARM) with SSL and TLS certification

● Operating temperature: -15℃ to 55℃

WIFI:

● Wifi module based on the Mediatek MT7628 580MHz 32-bit Application Processor

● 2T2R 2.4 GHz with 300 Mbps PHY data rate,802.11b/g/n WiFi

● Two USB 2.0 Host Connectors and one TF Card slot

● 128M bytes 16-bit DDR2 RAM

● 16M bytes SPI NOR Flash

● RGB LED strip as the status indicator

● OpenWrt 15.05, Linux distribution for embedded devices.

BLE:

● BLE module based on the Nordic's nRF52832 with ARM® Cortex®-M4 64MHz 32-bit processor

● At least Bluetooth 4.0(Only Bluethooth Low Energy)

3. Typical Application

● iBeacon / Eddystone / other BLE tag receiver

● BLE sensor reader / receiver

● Asset tracking

● Access control management

● Advertisement promotion

● Indoor location and position

● Industrial automation

Email: [e-mail] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 3

BLE 5.0 & WiFi Gateway Specification

Sign & Slots

Feature Description

ON/OFF

Power On / Off device

Reset

Factory reset or close/open AP

RJ-45

10/100Mbps Ethernet, 802.3af PoE

USB

2pcs external USB2.0 slot

IN

Micro-USB, power input (5.0V DC, 1A)

TF

TF card slot (reverse)

S1: Bluetooth temperature & humidity sensor E2: 300 to 500 meters MaxBeacon
E6: Bluetooth ambient light sensor i3: Waterproof iBeacon & Eddystone
i7 : Bluetooth accelerometer sensor C7: Credit card beacon with RFID/NFC
G1: Bluetooth & WiFi gateway

4. Appearance

G1-C

Email: [e-mail] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 4

BLE 5.0 & WiFi Gateway Specification

Static LED Strip Lights

Indicates that the gateway is staring

Dynamic white light rotation

Indicates that the gateway has been started

Dynamic LED Strip Lights
rotation

Indicates that the gateway is not connected to the server

Dynamic breathing lights

Indicates that the gateway is already connected to the server
(Note: The gateway is in the dynamic breathing lights by
default, it can step into the energy-saving mode on minute
after extinction of lights, you also can set up bright mode in
the configuration page if rich enough)

LED Strip Lights go out

Indicates that the gateway is not power or in energy-saving
mode

General Information

Color

White

Size

150x150x36mm

Net Weight

180g

Accessory

1x USB cable, mental fixing and screws

Absolute Maximum Rating

Power supply (Vcc)

Max. 5.5 Volts, DC

Storage temperature

-40℃ to 85℃

Voltage ripple

+/- 2%

Operation Condition (Recommendable)

Operating temperature

-15℃ to 55℃

Humidity

Max 95%, Non condensing, relative humidity

Power supply (Vcc)

DC 5.0 (+/- 5%)

Current Consumption

Powered by Micro-USB

330mA (LED strip and Wi-Fi works in the same time)

290mA (Wi-Fi only)

Powered by PoE

340mA (LED strip and Wi-Fi works in the same time)

300mA (Wi-Fi only

The meaning of the top LED Strip Lights status is as follows:

5. Electronic Parameters

Email: [e-mail] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 5

BLE 5.0 & WiFi Gateway Specification

Wi-Fi RF Performance

Wireless

IEEE 802.11b/g/n (single stream)

Network modes

Router, Repeater, Cellular (coming soon, Q4/2017)

Data rate

IEEE 802.11b, 1-11Mbps
IEEE 802.11g, 6-54Mbps
Frequency band

Number of selectable Sub
channels

Channel Bandwidth

20 / 40 MHz

Modulation

OFDM, DSSS, DBPSK,DQPSK, CCK , 16 / 64QAM

Maximum receive input level

- 10dBm (with PER < 8%@11 Mbps)

- 20dBm (with PER < 10%@54 Mbps)

- 20dBm (with PER < 10%@MCS7)

Minimum receive input level

- 87dBm (typ. with PER < 8%@11 Mbps)

- 70dBm (typ. with PER < 10%@54 Mbps)

- 70dBm (typ. with PER < 10%@MCS7)

Transmit Power
Carrier Frequency Accuracy

+/- 20ppm (crystal: 16MHz +/-10ppm in 25℃)

Antenna

Range

up to 100 meters( in open space)

Security

WPA / WPA2

BLE RF Performance

Operation Mode

LAN mode

Transmission Power

Ranges from -30 to +4dBm

RF Power Accuracy

+/- 4 dB

Receiver Sensibility

-108 dBm @250kbps, 0.1% BER

-93 dBm @1Mbps, 0.1 %BER

Maximum Received Signal
Strength at <0.1% PER

0dBm
Frequency Deviation

+/-250 kHz @BLE

Antenna

Flexible FPC antenna

Scanning & concurrently
process

200 BLE devices per second
Range

300 meters in open space (max.)

IEEE 802.11n(2.4GHz), 150Mbps

2.412 – 2.462 GHz

11 channels

18.13dBm (typical)@ 802.11b

17.36dBm (typical)@ 802.11g

18.8dBm (typical)@ 802.11n

FPC antenna

Email: [e-mail] SHENZHEN MINEW TECHNOLOGIES CO LTD Page 6

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use
only the supplied antenna.