MINEW TECHNOLOGIES E4 User Manual

RADBEACON E4

Radius
Networks

CUSTOMER LOCATION PLATFORM

Ruggedized, weatherproof beacon technology.

The RadBeacon E4 is a fully stand-alone Bluetooth 5 proximity beacon

that supports iBeacon

replaces the X4 in the Radius Networks product line. The RadBeacon

E4 is a rugged, weatherproof, and temperature-resistant proximity

beacon powered by four AA batteries. It can be installed in any location,

regardless of available power and provides proximity advertisements for

mobile applications that are compatible with iBeacon, AltBeacon, and

Eddystone standards, including the Physical Web

TM

, AltBeaconTM, and EddystoneTM technology. It

TM

.

HARDWARE

Size: 72 x 72 x 23mm
Weight: 65g
Colors: White
Form Factor: Waterproof IP65
Electrical Interface: Quad AA-battery clips
Operating Temperature: -40°C to 60°C (-40°F to 140°F)
Mounting: High-strength, durable adhesive

SETTINGS

Congurable Advertisements:

iBeacon
AltBeacon (Beacon ID | Reference RSSI)
Eddystone-UID
Eddystone-URL (Physical Web)

Advertisement Rate: 1Hz - 10Hz
Transmit Power: +4dBm to -20dBm

BATTERY LIFE

Advertising Rate Battery Life

High - 100ms 18 months
Medium - 200ms 36 months
Low - 1,000ms 184 months

BLUETOOTH RADIOS

Version: Bluetooth 5
Frequency: 2.402 GHz to 2480 GHz
Transmit Power: +4dBm to -30dBm
Typical Line-of-Sight Range: 5m to 50m
Antenna: Omnidirectional PCB antenna

CERTIFICATIONS

Apple iBeaconTM: iBeacon Licensed Product

Eddystone
Bluetooth: Bluetooth controller subsystem
FCC: FCC Part 15
CE: EN300328, EN60950, EN62479
IC: Industry Canada

TM

: Eddystone Licensed Product

For more information, contact

[e-mail] or call 202-681-9434

© 2018 Radius Networks, Inc.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be

installed and operated with minimum 20cm distance between the radiator your body: Use

only the supp

lied antenna.