
UUFFOO BBeeaaccoonn
MMooddeell:: DD1155NN
DDaattaasshheeeett VV33..00
204780001, UFO beacon with hidden push button, Bluetooth 5.0, pre-flashed
MiniBeacon Plus software supports broadcasting iBeacon and Eddystone
simultaneously
TEL: +86-755-2103 8160 EMAIL: sales@minewtech.com URL: www.minewtech.com 1

The UFO beacon D15N is a new generation beacon that loaded Bluetooth 5.0 hardware platform, hidden
push button and MiniBeacon Plus intelligence software.
D15N UFO beacon advertises standard iBeacon and Eddystone (UID,URL,TLM) simultaneously. The user can
configure D15N UFO beacon via configuration app BeaconSET+ as well.
Moreover, the push button can be defined to advertise different data to meet different application by click,
double-click and triple-click. For example, the single click can be used to the panic / emergency / SOS
button. For more functions, please refer to the configuration instruction.
FEATURE
- Advertise iBeacon & Eddystone simultaneously
- Unique MAC address (ITU)
- Bluetooth 5.0 chipset nRF52 series
- The max. 50 meters advertising distance
- Weatherproof housing with key-chain hole
- Push button for emergency using
APPLICATION
- Asset tracking and location
- Personnel tracking
- Activity monitoring
- Inventory tracking
CONFIGURATION TOOL
- BeaconSET+ (IOS & Android);
- The UFO beacon D15N can be turned off by app BeaconSET+;
ACTIVATE D15N
- Pressing the push button with power icon and keeping on 3 seconds;
- The UFO beacon D15N has been activated on after LED lights on 5 seconds then off, t
CERTIFICATION
- iBeacon MFi License (iBC-14-00582)
- FCC Regulation (FCC Part 15.)
- CE Regulations (Included EN300328/301489/60950/62479)
TEL: +86-755-2103 8160 EMAIL: sales@minewtech.com URL: www.minewtech.com 2

Other colors can be customized
1pc CR2025 coin battery, 85mAh, 3.0V
Tested at 0dBm transmission power
E2C56DB5-DFFB-48D2-B060-D0F5A71096E0 (Proximity)
Eddystone
Instance ID @UID
https://www.minewtech.com
random, it is MAC address of beacon actually.
yes (it is configuration mode)
minew123 (Allowing only 8 characters)
ELECTRONIC PARAMETER
PARAMETER SETTING
Each D15N UFO beacon has been pre-configured in the factory before the shipment. Here below is given
the main parameters and default settings.
TEL: +86-755-2103 8160 EMAIL: sales@minewtech.com URL: www.minewtech.com 3

UFO Beacon Configuration Instruction
TECHNICAL DOCUMENT
PACKING INFORMATION
Gift Package:
Firmware Flash
1. J-LINK Programmer Kit;
2. Programming ports definition;
Please contact MINEW sales team to ask more related information if needed.
DECLARATION
The contents of this datasheet are subject to change without prior notice for further improvement.
Minew team reserves the right to explain all the terms of this datasheet.
<END>
TEL: +86-755-2103 8160 EMAIL: sales@minewtech.com URL: www.minewtech.com 4

FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.