Milwaukee M18 ONESLDP Operator's Manual
Cat. No.
M18 ONESLDP
M18
™
SITE LIGHT/CHARGER WITH ONE-KEY
™
OPERATOR'S MANUAL
To reduce the risk of injury, user must read and understand operator's manual.
WARNING
2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric
Save all warnings
and instructions for future reference.
WORK AREA SAFETY
To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
Store idle light out of reach of children. Warm lights
can become hazardous in the hands of children.
Shorting the battery terminals together may cause burns
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
of injury.
-
cessive temperature.
above 130°C (265°F) may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
Charging improp-
CHARGER USE AND CARE
Avoid dangerous environments. Do not charge bat-
tery pack in rain, snow, damp or wet locations. Do not
use battery pack or charger in the presence of explosive
-
als) because sparks may be generated when inserting
Charge in a well ventilated area. Do not block charger
vents. Keep them clear to allow proper ventilation. Do
-
tery pack. Vented gases may explode.
Maintain charger cord. When unplugging charger,
pull plug rather than cord to reduce the risk of damage
to the electrical plug and cord. Never carry charger by
its cord. Keep cord from heat, oil and sharp edges.
Make sure cord will not be stepped on, tripped over
or subjected to damage or stress. Do not use charger
with damaged cord or plug. Have a damaged charger
replaced immediately.
Use only recommeded attachments. Use of an attach-
ment not recommended or sold by the battery charger
electric shock or personal injury.
Unplug charger when not in use. Remove battery packs
from unplugged chargers.
Store your battery and charger in a cool, dry place. Do
not store battery pack where temperatures may exceed
50°C (120°F) such as in direct sunlight, a vehicle or
metal building during the summer.
ELECTRICAL SAFETY
Power cord plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodi-
shock.
Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
To reduce the risk of electric shock, do not put light
in water or other liquid. Do not place or store appliance
where it can fall or be pulled into a tub or sink.
Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts.
Arrange cords carefully to avoid hazardous environ-
ments. Tripping or snagging on cords can cause injury
and product damage. Do not allow cords to run through
puddles or across wet ground.
Do not unplug by pulling on the cord. To unplug,
grasp the plug, not the cord.
Unplug the cord from outlet when not in use and
before servicing or cleaning.
Always use a suitable extension cord to reduce the
risk of electric shock.
PERSONAL SAFETY
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the light in
unexpected situations.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
light in unexpected situations.
BATTERY TOOL USE AND CARE
Recharge
manufacturer. A charger that is suitable for one type
another battery pack.
If operating a light in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of aRCD reduces the risk of
electric shock.
Caution - To reduce the risk of injury, charge
MILWAUKEE
®
Lithium-Ion packs only in their
MILWAUKEE
®
Lithium-Ion charger. Other types
of batteries may burst causing personal injury and
damage. Do not wire a battery pack to a power
supply plug or car cigarette lighter. Batteries will
be permanently disabled or damaged.
Charge only MILWAUKEE
®
M18™ Lithium-Ion
packs. Other types of batteries may burst causing
personal injury or damage.
To reduce the risk of electric shock, always
unplug charger before cleaning or maintenance. Do
not allow water to flow into AC/DC plug. Use a
Residual Current Device (RCD) to reduce shock
hazards.
If the external flexible cable or cord of this luminaire
is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar
qualified person in order to avoid a hazard.
The plug shall be connected to a socket-outlet that
provided at least IP54 degree of protection against
harmful ingress of dust and moisture.
packs. Use of any other battery packs may create a
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
3
Never service damaged battery packs. Service of
battery packs should only be performed by the manufacturer or authorised service providers.
SPECIFIC SAFETY RULES
SPECIFICATIONS
Cat. No. ..........................................M18 ONESLDP
Ingress Protection (AC output door closed)..... IP54
Ingress Protection (AC output door open)....... IP40
Max Number of Lights in Sequence
......................8
Battery Type ................................................. M18™
Charger Type ................................................M18™
............................................... 18
Battery Input Amps
.......................................... 4.5A
81........................................... stloV tuptuO regrahC
Charger Output Amps.........................................3 A
AC Input Volts
............................................ 220-240
AC Input Amps................................................. 1.2A
W091...............................................
L DESCRIPTION
1. Handle
2. Control panel
3. Battery power indicator
4. Brightness indicator
5. AC power indicator
6. Power button
7. Decrease brightness button
8. Increase brightness button
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE
®
service facility for a
replacement.
ADDITIONAL BATTERY SAFETY RULES
Warning! To reduce the risk of fire, personal injury,
and product damage due to a short circuit, never
immerse your tool, battery pack or charger in fluid or
allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain
industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short
circuit.
10
12
11
13
3
5
4
9
8
6
7
Rated
voltage
Rated
capacity
Cell
type
Cell
number
5
18V 2.0 Ah Li-ionM18B2
Typ e
18V 5.0 Ah Li-ion
M18B6 18V 6.0 Ah Li-ion 2 x 5
2 x 5
2 x 5
M18B9 18V 9.0 Ah
Li-ion 3 x 5
18V 4.0 Ah Li-ionM18B4
M18B5
AC Output Volts
......................................... 220-240
AC Output Amps .............................................8.8A
*
W0012........................................... sttaW tuptuO CA
AC Input Watts
CAUTION: Do not ingest battery – Chemical burn
hazard
This product contains a coin/button cell battery. If
the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can
lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from
children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
Battery Input Volts
SERVICE
Have
using only identical replacement parts. This will
ensure that the safety of the light is maintained.
9. Area selector
10. ONE-KEY indicator
11. Battery door locks
12. Battery door
13. Screw holes
14. AC cord
15. AC output
15
14
FUNCTIONA
1
2
SYMBOLOGY
V
Volts
Amps
A
Hz
Hertz
Do not step
Do not stare at the operating light source
Direct Current
Alternating Current
Regulatory Compliance mark (RCM).
This product meets applicable
regulatory requirements.
Read operator's manual
Class II, double insulated
Do not dispose of electric tools
together with household waste
material. Electric tools and electronic
equipment that have reached the end
of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
Recommended Ambient
Charging Temperature
.....................
*
5°C to 40°C
(40°F to 105°F)
Reduce AC Output Amps by 1.2A (276W) per
additional light added in sequence.
ADDITIONAL SAFETY RULES
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Caution, risk of electric shock
Loading...