Milwaukee M18 HCC45 Operator's Manual
Cat. No.
M18 HCC45
M18™ FORCELOGIC™ 860mm
2
ACSR CUTTER
OPERATOR'S MANUAL
To reduce the risk of injury, user must read and understand operator's manual.
WARNING
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
-
tions provided with this power tool. Failure to follow
all instructions listed below may result in electric shock,
Save all warnings and in-
structions for future reference. The term "power tool"
in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmo
-
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while operat
-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un
-
of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet condi
-
tions. Water entering a power tool will increase the
risk of electric shock.
Do not abuse the cord. Never use the cord for car
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not
use a power tool while you are tired or under the
A mo
ment of inattention while operating power tools may
result in serious personal injury.
Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool.
switch or energising power tools that have the switch
on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left at-
tached to a rotating part of the power tool may result
in personal injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair can
be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust col
-
lection can reduce dust-related hazards.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, break
age of parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly main
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazard
ous situation.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
manufacturer. A charger that is suitable for one type
with another battery pack.
battery packs. Use of any other battery packs may
3
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac
-
-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged
-
sion or risk of injury.
-
cessive temperature.
above 130°C (265°F) may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
range may damage the battery and increase the risk
SERVICE
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Never service damaged battery packs. Service of
battery packs should only be performed by the manu
-
facturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
CABLE CUTTER
Keep hands away from all cutting edges and mov-
ing parts. Laceration and amputation can occur.
To reduce the risk of injury, wear safety goggles
or glasses with side shields when operating or
servicing the tool. Material may crack or shatter.
WARNING
To reduce the risk of explosion,
electric shock and property
damage, do not use on live electrical lines.
Tool is NOT insulated. Contact with a live
circuit could result in severe injury or death. Turn
off power before making a cut. Never cut gas or water
lines.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
Maintain labels and nameplates. These carry im
portant information. If unreadable or missing, contact
a MILWAUKEE
®
service facility for a replacement.
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
SYMBOLOGY
Volts
Direct Current
WARNING
To reduce the risk of
explosion, electric
shock and property damage, do not
use on li ve el ectric al lin es. To ol is N OT
insulated. Contact with a live circuit
could result in severe injury or death.
Turn off power before making a cut.
Never cut gas or water lines.
WARNING
yawa sdnah peeK
from all cutting edges
and moving parts. Laceration and
amputation can occur.
To reduce the risk of injury, wear
safety goggles or glasses with side
shields when operating or servicing
the tool.
Read operator's manual.
FUNCTIONAL DESCRIPTION
1. Front blade
2. Jaw release levers
3. Rear blade
4. Blade retaining pin
5. Hanger
6. Handle
7. LED
8. Reverse switch
9. Trigger
10. Side handle
11. 5 mm hex socket screws
9
8
6
5
4
2
3
10
2
7
11
1
Regulatory Compliance mark (RCM).
This product meets applicable
regulatory requirements.
To reduce the risk of fire, personal
injury, and product damage due to
ADDITIONAL BATTERY SAFETY RULES
WARNING
a short circuit, never immerse your tool, battery pack or
charger in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short
circuit.
Loading...