Milwaukee M18 BCS Operator's Manual
OPERATOR'S MANUAL
Cat. No.
M18 BCS
M18™ CABLE STRIPPER
WARNING
To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
tions provided with this power tool. Failure to
follow all instructions listed below may result in
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated (cordless) power tool.
Read all safety warnings, instruc-
Save all
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not operate power tools in explosive atmo-
•
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while operat-
•
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
•
If operating a power tool in a damp location is
unavoidable, use residual current device
(RCD) protected supply. Use of a RCD reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
source and/or battery pack, picking up or carrying
the tool.
the switch or energising power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
-
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
A
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Any power tool that cannot be
BATTERY TOOL USE AND CARE
manufacturer. A charger that is suitable for one type
with another battery pack.
battery packs. Use of any other battery packs may
2
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
explosion or risk of injury.
excessive temperature. perature above 130°C (265°F) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
Charging im-
may damage the battery and increas
SERVICE
•
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
•
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
CABLE STRIPPER
•
WARNING
age, do not use on live electrical lines. Tool is
NOT insulated. Contact with a live circuit could result
stripping cable.
•To reduce the risk of personal injury, always
hold tool securely.
• Keep hands away from blade and bushing while
tool is in use. Fingers could be cut.
•
To reduce the risk of injury, wear safety goggles
or glasses with side shields when operating or
servicing the tool.
Use clamps or another practical way to secure
•
and support the cable to a stable platform.
Holding the cable by hand or against your body
leaves it unstable and may lead to loss of
control. Be cautious of remnants that will be
ejected from tool.
•
Cable has sharp edges. Always wear gloves when
handling any type of cable.
Inspect tool and bushing before use. A proper
•
connection and strip can only be achieved when
tool is clean of debris or remnants from prior use.
•
The recommended bushings for the various
cable types is based on the cable
manufacturer’s published cable dimensions.
Cable dimensions do vary. If the cable does not
strip properly, use a smaller or larger bushing. It is
the user's responsibility to ensure the cable has
been stripped properly.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
To reduce the risk of explosion,
electric shock and property dam-
Do not use this tool if you do not understand these
operating instructions or you feel the work is
beyond your capability; contact MILWAUKEE
or a trained professional for additional information
or training.
•
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding,
®
service facility for a
drilling, and other
®
Tool
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
ADDITIONAL BATTERY SAFETY RULES
WARNING
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
To reduce the risk of fire, personal
injury , and product damage due to
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Read Operator's Manual
Regulatory Compliance Mark (RCM).
This product meets applicable
regulatory requirements.
Do not dispose of electric tools
together with household waste
material. Electric tools and electronic
equipment that have reached the end
of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
FUNCTIONAL DESCRIPTION
3
1. Bushing latch
2. Depth gauge lock
3. Depth gauge
4. Handle grip
5. Control switch
6. Belt hook
7. LED
8. Trigger
3
2
1
4
5
8
7
6
Loading...