Milwaukee CP8730 User Manual

ChicagoChicago

Chicago

ChicagoChicago
PneumaticPneumatic

Pneumatic

PneumaticPneumatic

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

14.4 VOLT 3/8" SQUARE IMPACT WRENCH

CATALOG NO.

TMTM

TM

TMTM

SERVICE PARTS LIST

CP8730

STARTING
SERIAL NO.

A33A

00

BULLETIN NO.

54-26-2000

REVISED BULLETIN

WIRING INSTRUCTION

DATE

July 2003

58-01-1835

EXAMPLE:

Component Parts (Small #) Are Included

0

When Ordering The Assembly (Large #).

WARNING

!

SWITCH POLARITY SENSITIVE

If wired incorrectly with connector
block #7, switch will be damaged
and destroyed! Refer to Service
Wiring Diagram 58-01-1835.

FIG. PART NO. DESCRIPTION OF PART NO.REQ.

1 05-78-0350 3mm x 15mm Self-Tapping Screw (5)
2 05-78-0900 4mm x 20mm Pan Hd. PT T-20 Scr. (4)
3 05-81-0409 4mm x 8mm Pan Hd. Machine Screw (2)
4 06-65-0970 4mm x 10mm Pin (2)
5 14-30-0575 Gearcase Assembly (1)
6 14-50-0720 Motor Assembly (Includes item 3) (1)
7 22-56-0195 Connector Block (1)
8 23-66-2247 Switch Assembly (1)

9 31-44-1405 Right Housing (1)
10 31-44-1410 Left Housing (1)
11 32-62-0230 Planet Gear (2)
12 32-65-0100 Ring Gear Assembly (1)
13 34-40-0960 Rubber Ring (1)
14 38-50-0930 Middle Shaft Assembly (1)
15 42-06-0475 Output Shaft Assembly (1)
16 45-24-0520 Forward/Reverse Lever (1)
17 45-06-0750 Felt Washer (2)
18 45-06-0760 0.8mm x 20mm Seal (2)
19 45-88-0805 Washer (1)
20 45-88-0955 Washer (1)
21 12-20-1090 Service Nameplate Kit (1)
22 34-60-1030 Retaining Ring (1)

FIG. LUBRICATION:

6 Lightly coat the pinion area of the motor

assembly with Type "L" grease, No. 49-08-4170.

12 Lightly coat the inside surface of the ring gear

assembly with Type "L" grease.

4,11, Lightly coat the surfaces of the pins, planet

14,15,20 gears, middle shaft assembly, output shaft

assembly and washer with Type "L" grease.

MILWAUKEE ELECTRIC TOOL CORPORATION

13135 W. LISBON RD., BROOKFIELD, WI 53005

Drwg. 2