Milwaukee Cordless Impact Wrench User Manual

WIRING INSTRUCTIONS

TITLE

MILWAUKEE ELECTRIC TOOL CORP. 13135 WEST LISBON RD. BROOKFIELD, WIS.

AS AN AID TO REASSEMBLY,

TAKE NOTE OF WIRE ROUTING

AND POSITION IN WIRE GUIDES

AND TRAPS WHILE

DISMANTLING TOOL.

CORDLESS IMPACT WRENCH

CONNECT WIRES AS SHOWN AND PLACE THE COMPONENTS INTO THE LEFT HANDLE HALVE. CAREFULLY ROUTE THE WIRES TO BE SURE THAT THERE IS NO PINCHING WHEN REASSEMBLING THE RIGHT HANDLE HALVE.

DATE

Nov. 2002

BULLETIN

58-01-1835

SOLDER BOTH MOTOR LEADS TO THE SWITCH AS SHOWN. DO NOT USE TERMINALS.

WARNING

SWITCH POLARITY SENSITIVE

If #3 and #4 are wired incorrectly with connector block, switch will

be damaged and destroyed!

WIRING SPECIFICATIONS

Wire Wire Origin or

No. Color Part No. Gauge Length Terminals, Connectors and End Wire Preparation

1 Black Motor Assy. - - Component of the motor assembly. 2 Red Motor Assy. - - Component of the motor assembly. 3 Red Switch Assy. - - Component of the switch assembly. 4 Black Switch Assy. - - Component of the switch assembly.

BULK LEAD WIRE - BULLETIN 58-01-0003

NOTE:

All lead lengths are before stripping. All leads must be held to ± .125" unless specified elsewhere. Strip wire per ES 13-11. Crimp terminals per ES 13-15.

TERMINAL DESCRIPTION

Qty.Code Part No.

Drwg. 2