Milwaukee 49-24-0200 User Manual

OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR

Catalog No.

No de Cat.

Catálogo No.

49-24-0200

JOB SITE RADIO RADIO DE CHANTIER RADIO EN EL SITIO DE TRABAJO

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE

MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL

OPERADOR.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!

Failure to heed all warnings listed below, may result in electric shock, fire and/or serious

READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS.

personal injury.

KEEP THESE INSTRUCTIONS.

1. Read these instructions.

2. Keeps these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. Never immerse the appa- ratus in liquid or allow a liquid to flow inside the apparatus. Water entering an apparatus will increase the risk for electric shock.

6. Clean only with dry cloth. Certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include: gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Clean dust and debris from vents. Keep the apparatus handle clean, dry and free of oil or grease.

7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Do not abuse the cord. Never use the cord to carry the radio or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock and may create a fire.

11. Use only attachments/accessories specified by the

manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the radio has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the radio, the radio has been exposed to rain or moisture or does not operate normally. Service or maintenance performed by unqualified personnel could result in a risk of injury.

14. A battery operated radio with integral batteries or a sepa-

rate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one

type of battery may create a risk of fire when used with another battery.

15. Use battery operated radio only with specifically designated battery packs. Use of any other batteries may create a risk of fire.

16. When battery pack is not in use, keep it away from other

metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals

together may cause sparks, burns, or a fire.

17. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

18. Do not use any adaptor plugs.

19. When operating a radio outside, use an outdoor extension cord marked W-A or W. These cords are rated for outdoor use and reduce the risk of electric shock.

20. Never disassemble the radio or try to do any rewiring on

the radio's electrical system.

21. Do not expose this apparatus to dripping and splashing, or place objects filled with liquids on this unit.

SPECIFIC SAFETY RULES

1. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

2. This radio is designed to be powered by a standard 120 volt AC line or AC generator. It may also be powered using a 12, 14.4 or 18 volt MI LWAUKEE Power Plus battery pack. Do not attempt to use with any other voltage or power supply.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPERATION IS SUBJECT TO THE

Federal Communications Commission

FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Specifications

page 2

Cat. No.

49-24-0200

Volts

120

500

Symbology

Double Insulated

Volts Alternating Current

Amps

Hertz

Federal Communications Commission

Double Insulated Radios: Radios with Two Prong Plugs

Radios marked Double Insulated do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association and the National Electrical Code. Double Insulated radios may be used in either of the 120 volt outlets shown in Figures A and B.

Guidelines for Using Extension Cords

 If you are using an extension cord outdoors, be sure it is marked

with the suffix W-A (W in Canada) to indicate that it is acceptable for outdoor use.

 Be sure your extension cord is properly wired and in good elec-

trical condition. Always replace a damaged extension cord or have it repaired by a qualified person before using it.

 Protect your extension cords from sharp objects, excessive heat

and damp or wet areas.

 Unplug all cords during lightning storms or when unused for long

periods of time.

Fig. A

Fig. B

Underwriters Laboratories, Inc. (UL Listed to U.S. and Canadian

safety standards)

Caution. Risk of electric shock.

Presence of important operating instructions.

Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. Refer to the table shown to determine the required minimum wire size.

The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. When using more than one extension cord to make up the total length, be sure each cord contains at least the minimum wire size required. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum wire size.

Recommended Minimum Wire Gauge

Nameplate

Amperes

8.1 - 12

12.1 - 15

15.1 - 20

* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.

for Extension Cords*

25'

0 - 5

5.1 - 8

16 16 14 12 10

Extension Cord Length

100'

14 12 10 10

150'

12 10

50'

16 16 14 12 10

75'

16 14 12 10 10

200'

READ AND SAVE ALL INSTRUCTIONS

FOR FUTURE USE.

page 3

FEATURES

Battery Compartment

This radio can be powered using a MILWAUKEE Power-Plus 12, 14.4 or 18 volt battery. Run time can be maximized using an 18 volt battery.

For your convenience, this radio has a deep discharge prevention feature that stops the radio if a battery pack is running too low. This prevents a full electrical discharge and prolongs the life of the battery.

Stereo AUX Jack

This jack can be used to import the audio sound of a CD player, MP3 player or other audio device.

12 Volt DC Output Jack

This jack can be used to charge a cell phone, power a CD player or any other device that uses less than one (1) amp of DC electrical current.

NOTE: Any device that uses more than one (1) amp of DC electrical current will trip a self-resetting function and disable the output.

Output wiring is center positive

Detachable Bag

This water-resistant bag is designed to store a portable CD player, cell phone and pencils or pens.

20 Station AM/FM Preset

Up to 10 different radio stations per frequency band can be programed into memory for faster tuning.

Clock/Preset Backup

The clock and station presets are maintained by two (2) double AA batteries, located on the bottom of the radio unit. Batteries are included.

Mono or Stereo Sound

Push down the tuning knob to switch between Mono or Stereo sound. Mono sound is better for listening to talk radio and for receiving weaker radio signals.

Weather Band Station

Seven (7) different weather forecast stations are programmed into memory for faster tuning.

The broadcast range from the weather radio transmitter is approximately forty miles. The effective range depends on such things as terrain and quality of indoor/ outdoor antenna. Some stations may not be available in all locations.

For more information on weather band stations, visit the following address on the Internet: www.nws.noaa.gov/nwrhome.html

Punch EQ Button

This bass boost can be set to three different levels of output or turned off.

Durable Construction

This radio is designed to withstand harsh operating environments as well as unintentional drops.

External Antenna Connection

Allows connection of an additional antenna which may improve reception for FM and weather band frequencies.

1. On/off volume control knob

2. Tuning knob (Mono/Stereo button)

3. Display window

4. Battery compartment

5. Lock/ release latch

6. CLOCK button

7. MODE button

8. MEM button

9. PRESET button

10. Punch EQ button

11. Stereo AUX jack

12. Detachable bag hooks

13. External antenna connection

14. Line cord

15. 12 volt DC output jack

16. Soft grip

17. Protective handle

18. Detachable bag

FUNCTIONAL DESCRIPTION

12 13

page 4

OPERATION

WARNING!

To reduce the risk of fire or electric shock, do not expose this radio to rain or moisture.

To power the radio, plug the cord into an appropriate AC outlet or install a suitable battery pack.

Installing Battery Pack (Fig. 1 & 2)

1. Lift lock/release latch to open battery compartment.

2. Insert battery pack all the way until you here a click.

3. Close battery compartment door and secure the lock/release latch.

Fig. 1

Removing Battery Pack (Fig. 1 & 2)

Fig. 2

Setting Clock

1. Push the CLOCK button to view time. NOTE: Radio has to be powered on.

2. Push MEM button. Display window will flash.

3. Turn the tuning knob clockwise to set hours, counterclockwise to set minutes.

4. Push the MEM button or wait five (5) seconds to set time.

Setting Preset Stations

1. Select AM or FM band with the MODE button.

2. Tune to desired station.

3. Press the MEM button. NOTE: "MEMORY" will appear in the top right corner of the display

window.

4. Use the PRESET button to select a number one (1) through 10.

5. Push the MEM button to store preset selection.

Using Punch EQ Feature

Push the Punch EQ button to set the desired level of bass sound. The level of sound is indicated by the color of the Punch EQ button as follows:

 Off- No Light  Low- Green Light  Medium- Orange Light  High- Red Light

Eject button

1. Lift lock/release latch to open battery compartment

2. Push the eject button and pull the battery pack out.

3. Close battery compartment door and secure the lock/release latch.

Finding Stations

Selecting Band: Push the MODE button to select AM, FM, or weather band before tuning.

Manual Tuning: Turn the tuning knob right or left until it clicks to step through stations on

the current frequency band.

Auto Seek Tuning: Turn the tuning knob slightly and hold for one (1) second or more. The

radio automatically tunes to the nearest station on the current frequency band. Turn the tuning knob clockwise to go up on the band frequency, counterclockwise to go down on the band frequency.

Using Stereo AUX Jack

1. Turn the volume down all the way using the on/off volume control knob. This is to prevent speaker blowout.

2. Plug the auxiliary device into the Stereo AUX jack.

3. Press MODE button until "AUX" appears in the bottom left corner of the display window.

4. Press the "PLAY" button on the auxiliary device.

5. Adjust volume to desired level using the on/off volume control knob. NOTE: When in this mode the clock appears in the display window

and A.M. may also be displayed depending on time of day.

page 5

WARNING!

ACCESSORIES

Batteries may leak chemicals or may explode if used incorrectly. The following care should be taken to prevent such an incident:

 Make sure the positive (+) and negative (-) battery

terminals are positioned correctly.

 Do not mix new and old batteries together, or mix

different types of batteries.  Do not try to recharge non-rechargeable batteries. If chemicals from the batteries come in contact with your

skin, wash them off immediately with water. If chemicals leak onto the unit, clean the unit completely.

Changing or Installing Clock Batteries (Fig. 3)

1. If the clock display begins to fade, change the batteries.

Fig. 3

2. Remove the screw and battery cover.

3. Insert two (2) AA batteries according to matching positive (+) and negative (-) marks.

NOTE: If the radio is unplugged, replace batteries within 15 seconds to avoid loosing preset station memory.

4. Replace the battery cover and screw.

Battery cover

WARNING!

To reduce the risk of injury, always unplug the tool before attaching or removing accessories. Use only specifically recommended accessories. Others may be hazardous.

For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go on-line to www.milwaukeetool.com. To obtain a catalog, contact your local distributor or a service center.

WARNING!

Charge only 12, 14.4 and 18 volt battery packs in a charger. Other types of batteries may explode causing personal injury and damage.

18 Volt Battery Pack

Cat. No. 48-11-2230

14.4 Volt Battery Pack

Cat. No. 48-11-1024

12 Volt Battery Pack

Cat. No. 48-11-1960 & Cat. No. 48-11-1900

One-Hour Universal Charger

Cat. No. 48-59-0245

One-Hour Universal Vehicle Charger

Cat. No. 48-59-0186

page 6

FIVE YEAR TOOL LIMITED WARRANTY

Every MILWAUKEE tool is tested before leaving the factory and is warranted to be free from defects in material and workmanship. MILWAUKEE will repair or replace (at MILWAUKEEs discretion), without charge, any tool (including battery chargers) which examination proves to be defective in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE Factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight pre- paid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE authorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents.

Battery Packs, Flashlights, and Radios are warranted for one (1) year from the date of purchase.

THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclusions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.

+ 14 hidden pages