Milwaukee 2741-20 Service Parts List

SERVICE PARTS LIST

BULLETIN NO.

54-00-FNLR

See

Pages 2, 3,

4 and 5 for

Service Replace-

ment parts for the

di󰀨erent Magazine

Attachments

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

M18™ FUEL™ Finishing Nailers

CATALOG NO.

2740-20, 18 Ga. Straight Finishing Nailer
2741-20, 16 Ga. Straight Finishing Nailer
2742-20, 16 Ga. Angled Finishing Nailer
2743-20, 15 Ga. Angled Finishing Nailer

REVISED BULLETIN

WIRING INSTRUCTION

DATE

Oct. 2019

Angled Finishing Nailers

(2743-20 Shown)

Straight Finishing Nailers

(2741-20 Shown)

Milwaukee Electric Tool: M18™ FUEL™ Finishing Nailers

and applicable Magazine Assemblies

Due to the combination of the compressed air system and electronics in this tool,

service can only be performed at this Milwaukee factory Central Repair Center:

MILWAUKEE ELECTRIC TOOL Central Repair

1401 Sycamore Avenue

l

Greenwood, MS 38930-7277

Please send your tool directly to this location for service.

If you have questions please contact Milwaukee Product Service at:

Product Technical Support via phone at: 262.783.8642

Or

Via email at: METProductSupport @milwaukeetool.com

Disassembly is not recommended and could void the warranty.

Drwg. 4

2740-20, 18 Ga. Straight Finishing Nailer
Magazine Attachment

FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 44-60-1124 Solid Pin 1

2 44-60-1123 Solid Pin 2
3 42-09-0297 Release Bracket Pivot Arm 1
4 --------------- Release Latch 1
6 42-36-0205 Release Bracket 1
7 44-34-0009 Front Upper Receiver, 18 Ga. Straight 1
8 44-60-1122 Step Connecting Pin 1
9 44-34-0011 Rear Upper Receiver, 18 Ga. Straight 1
10 42-38-0142 No-Mar Pad 1
11 44-94-0204 Work Contact Bracket 1
12 06-81-0166 M4 x 0.7 x 7 Pan Hd. T-20 Screw 1
13 45-60-0033 Support Block 1
14 44-34-0012 Feed Lip, 18 Ga. Straight 1
15 --------------- Depth Adjustment Wheel 1
16 --------------- C-Ring 1
17 --------------- External Retaining Ring 1
21 40-50-1841 Spring 1
27 05-75-0011 M4 x 0.7 x 5.3 Cap Hd. Hex Screw 1
28 05-88-1210 M4 x 0.7 x 14 Pan Hd. T-20 Screw 1
37 44-20-0537 Latch 1
38 40-50-0372 Spring 1
39 44-60-0171 Coil Pin 2
40 44-66-0186 Magazine Back Plate 1
41 --------------- Latch Plate 1

37 38 40

27

50

28

1 2 3 6 7

54

8 9 46 56

7

6

42

(2x)

41

4

4 41

56

42

FIG. PART NO. DESCRIPTION OF PART NO. REQ.
42 06-82-1087 M3 x 12mm Pan Hd. ST T-10 Screw 2

46 34-60-2493 External Retaining Ring 1
50 43-40-0909 Stationary Magazine Assembly 1
51 43-40-0910 Sliding Magazine Assembly 1
52 45-94-0304 Depth Adjustment Wheel Kit 1
53 44-14-0307 Depth Adjustment Assembly 1
54 44-34-0013 Rear upper Receiver Assembly, 18 Ga. S 1
55 44-52-0011 No-Mar Pad/Work Contact Bracket Assy. 1
56 44-20-0176 Release Latch Assembly 1
84 48-55-3510 Contractor Bag 1

3

14

9

8

46

2

(2x)

1

10

55

11

10

12

15

53

11

52

16

17

21

15 16
17

13

51

37 38
39 40

39

(2x)

84

2741-20, 16 Ga. Straight Finishing Nailer
Magazine Attachment

FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 44-60-1124 Solid Pin 1

2 44-60-1123 Solid Pin 2
3 42-09-0295 Release Bracket Pivot Arm 1
4 --------------- Release Latch 1
5 --------------- Latch Plate 1
6 06-82-1087 M3 x 12mm Pan Hd. ST T-10 Screw 2
7 42-36-0205 Release Bracket 1
8 44-34-0049 Front Upper Receiver, 16 Ga. Straight 1
9 44-60-1122 Step Connecting Pin 1
10 44-34-0050 Rear Upper Receiver, 16 Ga. Straight 1
11 34-60-2493 External Retaining Ring 1
12 44-34-0051 Feed Lip, 16 Ga. Straight 1
13 06-81-0166 M4 x 0.7 x 7mm Pan Hd. T-20 Screw 1
14 06-82-3065 M5 x 0.8 x 15mm Pan Hd. T-25 Screw 1

24

1 2 3 7 8

52

9 10 11 56

10

9

8

7

5

6

(2x)

4

50

12

53

34

26

38

23

14

74

84

13

55

11

35

33 34

57

35

32

4 5

56

6

1

3

FIG. PART NO. DESCRIPTION OF PART NO. REQ.

23 44-81-0049 Magazine Channel, 16 Ga. Straight 1
24 40-50-1843 Constant Force Spring 1
26 44-96-0310 Magazine Roller 1
31 42-38-0143 No-Mar Pad 1
32 44-94-0206 Work Contact Bracket 1
33 --------------- Depth Adjustment Wheel 1
34 --------------- C-Ring 1
35 --------------- External Retaining Ring 1
38 40-50-1841 Spring 1
50 45-24-0329 Magazine Pusher Assembly 1
51 44-52-0012 No-Mar Pad/Work Contact Bracket Assy. 1
52 44-34-0016
53 44-14-0309 Depth Adjustment Assembly 1
55 43-40-0911 Magazine Assembly, 16 Ga. Straight 1
56 44-20-0176 Release Latch Assembly 1
57 45-94-0304 Depth Adjustment Wheel Kit 1
74 06-82-3065 M5 x 0.8 Pan Hd. T-25 Machine Screw 1
84 48-55-3510 Contractor Bag 1

Rear Upper Receiver Assy., 16 Ga. Straight

2

(2x)

31

51

11
12

1

33

2742-20, 16 Ga. Angled Finishing Nailer
Magazine Attachment

FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 44-34-0045 Rear Upper Receiver, 16 Ga. Angled 1

2 44-60-1122 Step Connecting Pin 1
3 06-82-1087 M3.0 x 12mm Pan Hd. ST T-10 Screw 2
4 --------------- Latch Plate 1
5 --------------- Release Latch 1
6 42-36-0205 Release Bracket 1
7 44-60-1123 Latch Pin 2
8 42-09-0295 Release Bracket Pivot Arm 1
9 44-60-1124 Catch Pin 1
10 44-34-0046 Front Upper Receiver, 16 Ga. Angled 1
11 42-38-0141 No-Mar Pad 1
12 44-94-0202 Work Contact Rod 1
13 44-34-0047 Feed Lip, 16 Ga. Angled 1
14 --------------- Depth Adjustment Wheel 1
15 --------------- External Retaining Ring 1
16 --------------- C-Ring 1
20 40-50-1841 Depth Adjustment Spring 1
23 05-81-0166 M4.0 x 0.7 x 7mm Pan Hd. T-20 Screw 1
28 40-50-1843 Constant Force Spring 1
35 44-81-0047 Magazine Channel, 16 Ga. Angled 1

40 34-60-2493 External Retaining Ring 1
41 44-96-0310 Magazine Roller 1
42 05-81-0708 M5 x 0.8 x15mm T-25 Screw 1
50 45-24-0377 Magazine Pusher Assembly 1
51 44-52-0010 No-Mar Pad/Rod Assembly 1
52 44-34-0048

53 44-14-0305 Depth Adjustment Assembly 1

55 43-40-0907
55 43-40-0908

56 44-20-0176 Release Latch Assembly 1
57 45-94-0304 Depth Adjustment Wheel Kit 1
74 06-82-3065 M5 x 0.8 Pan Hd. T-25 Machine Screw 1
84 48-55-3510 Contractor Bag 1

Rear Upper Receiver Assembly, 16 Ga. Angled

Magazine Assy. for 9.0Ah batteries or smaller
Magazine Assy. for 12.0Ah batteries or smaller

1

1

1

NOTE:
The inital Magazine design on model 2742-20 allows the tool

to operate o󰀨 of several di󰀨erent M18 REDLITHIUM™ battery

sizes from a 1.5 amp-hours up to 9.0 amp-hours.

To power an earlier version of the 2742-20 with a 48-11-1812
M18™ REDLITHIUM™ 12.0 amp-hour battery, Magazine As­sembly 43-40-0908 must be ordered and installed.

See the detail below to determine what magazine assembly
is on your tool.

Magazine Assembly
43-40-0907

No notch

35

41

Magazine Assembly
43-40-0908

Notch

3

5

(2x)

3 4

56

5

8

1 2 6 7 8

52

9 10 40 56

6

4

9

7

10

7

51

28

42

13

1

2

40

12

11

11
12

50

53 20 23

16

14

15

14 15

57

16

55

74

84

2743-20, 15 Ga. Angled Finishing Nailer
Magazine Attachment

FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 44-34-0005 Rear Upper Receiver, 15 Ga. Angled 1

2 44-60-1122 Step Connecting Pin 1
3 06-82-1087 M3.0 x 12mm Pan Hd. ST T-10 Screw 2
4 --------------- Latch Plate 1
5 --------------- Release Latch 1
6 42-36-0205 Release Bracket 1
7 44-60-1123 Latch Pin 2
8 42-09-0295 Release Bracket Pivot Arm 1
9 44-60-1124 Catch Pin 1
10 44-34-0006 Front Upper Receiver, 15 Ga. Angled 1
11 42-38-0141 No-Mar Pad 1
12 44-94-0202 Work Contact Rod 1
13 44-34-0007 Feed Lip, 15 Ga. Angled 1
14 --------------- Depth Adjustment Wheel 1
15 --------------- External Retaining Ring 1
16 --------------- C-Ring 1
20 40-50-1841 Depth Adjustment Spring 1
23 05-81-0166 M4.0 x 0.7 x 7mm Pan Hd. T-20 Screw 1
28 40-50-1843 Constant Force Spring 1
35 44-81-0045 Magazine Channel, 15 Ga. Angled 1

40 34-60-2493 External Retaining Ring 1
41 44-96-0310 Magazine Roller 1
42 05-81-0708 M5 x 0.8 x15mm T-25 Screw 1
50 45-24-0375 Magazine Pusher Assembly 1
51 44-52-0010 No-Mar Pad/Rod Assembly 1
52 44-34-0008

53 44-14-0305 Depth Adjustment Assembly 1
55 43-40-0901

55 43-40-0902

56 44-20-0176 Release Latch Assembly 1
57 45-94-0304 Depth Adjustment Wheel Kit 1
74 06-82-3065 M5 x 0.8 Pan Hd. T-25 Machine Screw 1
84 48-55-3510 Contractor Bag 1

Rear Upper Receiver Assembly, 15 Ga. Angled

Magazine Assy. for 9.0Ah batteries or smaller
Magazine Assy. for 12.0Ah batteries or smaller

1

1

1

NOTE:
The inital Magazine design on model 2743-20 allows the tool

to operate o󰀨 of several di󰀨erent M18 REDLITHIUM™ battery

sizes from a 1.5 amp-hours up to 9.0 amp-hours.

To power an earlier version of the 2743-20 with a 48-11-1812
M18™ REDLITHIUM™ 12.0 amp-hour battery, Magazine As­sembly 43-40-0902 must be ordered and installed.

See the detail below to determine what magazine assembly
is on your tool.

No notch

Magazine Assy.
43-40-0901

35

Notch

Magazine Assy.
43-40-0902

1 2 6 7 8

52

9 10 40 56

6

4

3

5

(2x)

10

41

55

28

50

13

1

2

53

40

16

42

74

84

23

20

56

3 4
5

14

12

11

7

9

8

51

11
12

15

57

14 15
16