SERVICE PARTS LIST
BULLETIN NO.
54-00-2679
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
M18™ FORCELOGIC™ 6T Commercial Crimper
CATALOG NUMBER
CUTTER HEAD SERVICE PARTS PAGE 2-5
ACCESSORIES PAGE 2
2679-20
REVISED BULLETIN
SERIAL
NUMBER
LUBRICATION INSTRUCTIONS PAGE 2-5
G69(A thru D)
WIRING INSTRUCTION
DATE
Jan. 2020
Due to the combination of hydraulics and electronics in this tool,
service can only be performed at Milwaukee Authorized Hydraulic Repair Centers:
MILWAUKEE TOOL Central Repair
1401 Sycamore Avenue l Greenwood, MS 38930-7277
Please send your tool directly to this location for service.
Or
Via e-Service at: www.milwaukeetool.com/e-service
questions, please call 1.800.SAWDUST (1.800.729.3878)
Or
Visit www.milwaukeetool.com to nd your closest
Milwaukee authorized Hydraulic repair center
Or
Return it to a MILWAUKEE factory Service Center location, freight prepaid and insured.
A copy of the proof of purchase should be included with the return product.
If you have questions please contact Milwaukee Product Service at:
Product Technical Support via phone at: 262.783.8642
Or
Via email at: METProductSupport @milwaukeetool.com
Disassembly is not recommended and could void the warranty.
Drwg. 4
Accessories and External Service Parts for 2679-20 6T Commercial Crimper
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 49-16-U000 U-Jaw Assembly (1)
2d --------------- Half Knurled Pin (1)
2e --------------- Clevis (1)
2f 44-60-0036 Lock Pin (1)
2g 40-50-0019 Lock Pin Spring (1)
2h 31-12-0018 Lock Pin Cap (1)
2j 06-82-0050 Clevis Pin Cap Screw T-25 (1)
2r 06-87-0010 Knurled Thumb Screw (1)
31r 06-82-7225
31x 31-50-0002 Coin Cell Door (Not Shown) (1)
32 12-20-0044 Service Nameplate (Not Shown) (1)
40 42-55-0160 Carrying Case (Not Shown) (1)
49 -------------- 94 10-20-0919 Crimp Tool Label (Not Shown) (1)
100 44-60-0062 Clevis Pin Upgrade Kit (1)
M3 x 12 Pan Hd. ST T-10 Screw (Not Shown)
3V Coin Cell Battery (CR 2032) (Not Shown)
2h
(2)
(1)
2g
2j
2d
2f
= See torque chart below
NOTE:
Early design of this tool did not have the
Knurled Thumb Screw (2r). The Lock Pin (2f)
did not have threads on that corresponding
end. Order the Clevis Pin Upgrade Kit
(100) 44-60-0062.
2f 2j
100
2r
2r
NOTE:
See page 3 for the
servicing of the U Jaw
Assembly 49-16-U000.
See page 4 for the
servicing of the U Jaw
Assembly 49-16-U111.
See page 5 for the
servicing of Cu/Al Jaw
Assembly 49-16-2780.
SEAT TORQUE
FIG. PART NO. PART or WHERE USED (KG/CM) (IN/LBS)
2j 06-82-0050 Screw, Lock Pin Cap 80±3 69±2
2r 06-87-0010 Knurled Thumb Screw 4±1 3.5
TORQUE SPECIFICATIONS
Loading...