Milwaukee 2486-20 Service Parts List

SERVICE PARTS LIST

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS

M12 FUEL™ Straight Die Grinder

CATALOG NO.

2486-20

STARTING
SERIAL NO.

15

K93A

BULLETIN NO.

54-22-2105

REVISED BULLETIN

WIRING INSTRUCTION

DATE

Sep. 2019

33

34

20

18

NOTE: Damper is pressed
in-between housing halves.
Please replace #15 42-70-0480
Spring Clip when removed.

19

30

13

14

41

21

17

5

43

35

42

5 15 16 17 18

40

19 20 21 30 31

16

1

44

2

2

1

EXAMPLE:

00

Component Parts (Small #) Are

0

Included When Ordering The Assembly
(Large #).

FIG. PART NO. DESCRIPTION OF PART NO. REQ.

1 48-68-0031 Collet Nut 1
2 48-66-0974 1/4" Collet 1
5 --------------- Damper for Support 1
13 23-28-0340 Light Pipe 1
14 44-60-0575 Rivet Pin for Housing 1
15 42-70-0480 Spring Clip 1
16 --------------- Housing Support Head 1
17 --------------- Housing Support Grip 1
18 06-82-3002 Housing Screw 11
19 --------------- Damper for Cover 1
20 --------------- Housing Cover Grip 1
21 --------------- Housing Cover Head 1
30 12-20-2482 Service Nameplate 1
31 10-20-6053 Warning Label (Not Shown) 1
32 42-77-0405 1/8" Collet (Optional) Not Shown 1
33 49-96-4040 Open End Wrench (1/2") 1
34 49-96-4090 Open End Wrench (11/16") 1
35 42-55-2425 Contactor Bag 1
40 14-34-0003 Housing Kit 1
41 14-20-0082 Electronics Assembly 1
42 16-01-2405 Rotor Assembly 1
43 44-10-0521 Paddle Trigger Assembly 1
44 14-46-0166 1/4" Collet and Nut Kit 1

Install the electronics assembly,
route wires through wire traps
and channels as shown. Be
sure all components are seated
squarely and firmly in place. Be
sure there is no interference
when installing the housing
covers (20, 21).

Wire Traps or Channels

SCREW TORQUE SPECIFICATIONS

SEAT TORQUE
FIG. PART NO. WHERE USED (KG/CM) (IN/LBS)
18 06-82-3002 Housing Cover Head 7-9 6.0-7.8
18 06-82-3002 Housing Cover Grip 7-9 6.0-7.8

MILWAUKEE TOOL l www.milwaukeetool.com

13135 W. Lisbon Road, Brookeld, WI 53005

Drwg. 1