Milwaukee Tool 2445-20 User Manual
WIRING INSTRUCTIONS
TITLE
MILWAUKEE ELECTRIC TOOL CORP. 13135 WEST LISBON RD. BROOKFIELD, WIS.
Route white field wire #5 from brush card
between the post and the top of the rear
bearing bore first and then around bearing
bore as shown.
Route blue brush wire #9 and white
brush wire #8 through wire traps and
over rear bearing bore as shown.
T1
DOUBLE REDUCTION PISTOL GRIP TOOLS
Post
Route brown
field wire #6
from the brush
card through any
of the three traps
T1
in tab on the motor
housing, as shown.
Insert wire #6 into
hole "2" on the bottom
of the switch. (The
hole is marked with
a "2" on the side of
the switch).
DATE
Oct. 2000
BULLETIN
58-03-1805
Bottom
view of
switch
SCHEMATIC
Post
Insert black suppressor wires
#3 and #4 into holes marked
"1" and "2A" on the bottom of
the switch. Wires can go in
either hole.
Fixed cord
shown
Route white field wire #5 from the
brush card around the post in the
motor housing and into either hole
"1" on bottom of switch.
Insert brown wire #1, from the
cord or blade housing assembly,
into the hole marked "2ò" on the
bottom of the switch.
Insert blue wire #2, from the
cord or blade housing assembly,
into the hole marked "1ò" on the
bottom of the switch.
.25 Minimum
WIRING SPECIFICATIONS
Wire
No. Length
Wire
Color
1 Brown ----- *
2 Blue ----- *
3 Black -----
4 Black ----- **
5 White ----- ** * Component of the brush card assembly.
6 Brown ----- *** Component of the brush card assembly.
7 Brown ----- *** Component of the brush card assembly.
8 White ----- ** * Component of the brush card assembly.
9 Blue ----- *** Component of the brush card assembly.
10 Black ----- * ** Component of the brush card assembly.
Origin or
Gauge
*
*
**
**
Terminals, Connectors and 1 or 2 End Wire Preparation
Component of cord set or blade housing assembly.
Component of cord set or blade housing assembly.
** Component of suppressor assembly.
Component of suppressor assembly.
***
***
***
***
***
***
BULK LEAD WIRE - BULLETIN NO. 58-01-0003
Fixed Cord
Installation
For double insulated tools
with 2-wire quik-lok cords,
orientate the blade housing
assembly as shown and place
blue wire #2 first into the
bottom of the handle portion of
the motor housing.
TERMINAL DESCRIPTION
Part No.Code Qnty.
T1 23-74-1060 4
Drwg. 1
Loading...