Milton Industries 2810A-KIT, 2800S-KIT User Manual
The Brake Releaser® by Milton®
Operating Instructions and Parts Manual
1
TABLE of CONTENTS
Product Introduction ………………………………………………………… 2
General Safety Information .………………………………………………... 2
Configurations ………………………………………………………………... 3
Application …………………………………………………………………….. 3
Dangerous Practices ……………..………………………………………….. 5
Servicing of a Pressurized Device ………………………………………… 5
Operating Instructions ………………………………………………………. 5
Troubleshooting ………………………………………………………………. 7
Warranty Information ………………………………………………………… 7
www.miltonindustries.com
The Brake Releaser® by Milton®
Operating Instructions and Parts Manual
2
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product
described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in
personal injury, death, and/or property damage! Retain instructions for future reference.
NOTICE: Information that requires special attention
This manual contains information that is very important to know and understand. This information is provided for SAFETY and to
PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
FLAMMABLE indicates a
others.
CAUTION indicates a
potentially hazardous
situation which, if not
avoided, MAY result in
minor, moderate, or
severe injury.
WARNING indicates a
potentially hazardous
situation which, if not
avoided, COULD result
in death or serious
injury.
PRODUCT INTRODUCTION
The Brake Releaser® by Milton® is a tool that utilizes de-icing fluid to release frozen brake lines and to
pre-treat brake lines in cold weather. The tool is ONLY to be used while the TRUCK IS STATIONARY.
NEVER DRIVE WHEN THE BRAKE RELEASER® IS IN PLACE. Always remove and store The Brake
Releaser® before driving. See ‘Important Safety Instructions’ section of this manual for more
information.
The Brake Releaser® by Milton® is designed to
dissolve the ice crystals resulting from moisture build up
in cold weather conditions that form in the brake airline
system of semi-trailer units. The tool can work to both
release frozen brake lines and to pre-treat trailers to
help reduce the risk of frozen brakes. The Brake
Releaser® is designed to allow for servicing trailers,
dump trucks, flatbeds, and chassis; all depending on
your current needs. All applications are completed when
the trailer is stationary, as the failure to remove and
store The Brake Releaser® before driving could result in
injury or death.
Thank you for purchasing this Milton® product.
potentially hazardous
situation which, if not
avoided, could combine
with other factors or in
itself, could result in death
or serious injury to you or
GENERAL SAFETY INFORMATION
Read and understand the contents of this manual before using this product
Protective eyewear and gloves are recommended while using this product
Do NOT exceed the rated working pressure of The Brake Releaser®
www.miltonindustries.com
The Brake Releaser® by Milton®
Operating Instructions and Parts Manual
3
2800S-KIT
2810A-KIT
The Brake Releaser® Standard Kit
The Brake Releaser® Kit w/ Accessories
1
The Brake Releaser® Unit
1
The Brake Releaser® Unit
1
45° Outlet
1
45° Outlet
1
Straight Outlet
1
Straight Outlet
1
Instruction Manual
1
Instruction Manual
1
Safety Glasses
1
Safety Gloves
1
Carrying Bag
#
Description # Description
1
Main Reservoir (Bowl)
5
Tractor-Side Glad Hand
2
Reservoir Lid (Lid)
6
Trailer-Side Straight Double Sided Threaded Coupling
(Straight Outlet) attached to Glad Hand
3
Lid Gasket
7
Trailer-Side 45° Angled Double Sided Threaded Coupling
(45 Degree Outlet) attached to Glad Hand
4
Ball Control Valve
8
Safety Relief Valve
8
4
5
3
CONFIGURATIONS
APPLICATION
Use the glad hand connection with the straight outlet for applications using flatbeds, dump trucks and chassis.
Use the glad hand connection with the 45° angled outlet for applications using vans or reefers.
www.miltonindustries.com
Loading...