Miltel Communications GL3RPT450 Users Manual

Miltel Wireless Data Link for RF Telemetry Systems

Transceiver 3A

(Receiver/Repeater)

FCC ID: MLLGL3RPT450

Usseerr

U

Maannuuaall

M

Miltel Communications Ltd. October 2010

Table of Contents

Chapter 1 Introduction .............................................................................................................3

1.1 Purpose and Use ...........................................................................................................3

1.2 System General Description .........................................................................................3

1.3 Theory of Operation.....................................................................................................4

Chapter 2 Technical Characteristics..............................................................................................5

2.1 Technical Specification .................................................................................................5

2.1.1 Electrical...................................................................................................................5

2.1.2 Physical.....................................................................................................................6

2.2 Label Contents ..............................................................................................................6

Chapter 3 Installation Instructions................................................................................................7

3.1 General .........................................................................................................................7

3.2 Installation ....................................................................................................................7

Deceleration of Conformity ............................................................................................................8

2

Chapter 1

Introduction

1.1 Purpose and Use

The Transceiver 3A (

transfer in Miltel’s radio telemetry system. The system is used for utility

consumption readings collection system as well as for other applications such as in

agricultural systems or general purpose sensor telemetry system. This device is

installed on-site by a professional field technician, thus this manual includes

technical terms. The equipment should not be installed by a non-professional

individual that has not been trained and authorized.

FCC ID: MLLGL3RPT450

) is a receiver/repeater that is used for data

1.2 System General Description

The Transceiver 3A system is a computerized fully automatic radio device. It

requires no human intervention after initial installation. The device acts as a store-

and-forward radio relay. The Transceiver 3A operates as a Gateway (backhaul

receiver) or as a repeater that captures transmissions from a Miltel transmitter and,

after validating the message, transmits the message again. When operating as a

Repeater the device relays information from transmitters to a receiver that acts as a

Gateway (base station) which is typically deployed with a RS232 connection to a PC

or with a LAN connection (TCP/IP) that allows backhauling data to the backoffice

management system. The Gateway (Receiver) transfers the data to the central

computer for data collection and for further analysis and reporting.

3