Milnor MWR12X5 User Manual

MWR12X5

y

25 LB. (11KG) CAPACITY

IGID-MOUNT WASHER-EXTRACTOR

R

SPECIFICATION SHEET

FLOOR REQUIREMENT MINIMUM 6”

R

ECOMMENDED , ▼

LEGEND

C Cold water inlet .75” (19 mm) GHT

D1 Drain to sewer 2” (51 mm) ID hose

D2 Overflow 2” (51 mm) ID hose

E Electrical connection

F Anchor bolt holes .8125” (21 mm)

G Chemical flush .75” (19 mm) GHT

H Hot water inlet .75” (19 mm) GHT

L1 Liquid supply inlets

L2 Soap chute

MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS

Capacity – lbs (kg) 25 (11)
Cylinder Diameter x Depth – ins (mm) 23 x 14 (584 x 356)
Cylinder Volume – cu. ft. (L) 3.37 (95)
Door Opening – ins (mm) 12 (305)
Machine Dimensions

(W x D x H) – ins (mm)
Shipping Dimensions
(W x D x H) – ins (mm)

26 x 34.94 x 42.38
(660 x 888 x 1077)
28 x 38 x 49
(711 x 965 x 1245)

Motor – HP (kW) 1 (0.746)
Wash Speed – RPM 32
Distribution Speed – RPM 64
Extraction Speed – RPM 525
Extraction G-Force 90

Static Weight – lbs (kg) 
Max. Dynamic Load RMS – lbs (kg) 

675 (306)
563 (255)

Frequency (Hz) 8.75

(Required)

Water Pressure

– psi (bar) 10-75 (.68-5.1)

Water Valve CV Rating – gal/min (L/min) 4.6 (17)

Minimum Recommended Distance
Between Machines – ins (mm)

B22SS10023/10334 Page 1 of 2

0 (0)

Voltage Running

Amps

Fuse

(Amps)

Circuit Breaker

(Amps)

220/3/50 3 FRN6 6
208,240/1-3/60 4/3 FRN6 6
380/3/50-60 3 FRS5 5
415/3/50 2.5 FRS5 5
480/3/60 2 FRS5 5

See Fuse and Wire Size manual MAEFUSE1BE for safety information.

See dimensional drawing for complete details.

▼

It is the sole responsibility of the owner/user to assure that the floor and/or any



other supporting structure exceeds not only all applicable building codes, but also
that the floor and/or any other supporting structure for each washer-extractor or
group of washer-extractors has sufficient strength and rigidity (i.e., a natural or
resonant frequency many times greater than the rotational machine speed with a
reasonable factory of safety) to support the weight of all the full
including the weight of the water and goods, and including the published 360º
rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the
factory for additional machine data for use by a structural engineer.

loaded machine(s)

W

MWR12X5

25 LB. (11KG) CAPACITY

IGID-MOUNT WASHER-EXTRACTOR

R

Standard Features:

• 3 speeds

• E-P Express

• Vacuum fluorescent display

• Single-motor inverter drive

• Tall, lifting ribs

• Sealed ball bearings

• High M.A.F. (Mechanical Action Factor)

• Large cylinder perforations

• Fresh-water flushing chemical manifold

• Auto tension V-belt drive

• Six (6) liquid chemical injection ports

• Control reads in English/second language

• 5-year limited warranty on frame, cylinder & shell

®

programmable controller

SPECIFICATION SHEET

Optional Features:

• Lint trap

• Mounting base, 10” or 6”

hy Purchase Milnor?

• Greater cylinder perforated-area generates better wash quality, better rinsing and

better extraction. BENEFIT: Better extraction saves dryer fuel.

• Faster process times reduce fabric wear, promoting longer linen life!

BENEFIT: Saves linen replacement costs.

• Tall perforated ribs provide excellent lift and high drop.

BENEFIT: Greater mechanical action (M.A.F.) leads to better wash quality.

• 90-G high extract provides excellent moisture removal. Lower extract speeds are

available for uniforms, delicate textiles and blended fabrics.

BENEFIT: Better extraction saves dryer fuel.

• E-P Express control with vacuum fluorescent display allows operator to choose

formulas from real words, not codes. Standard controller features
English/Spanish (other languages optional). Controller also provides diagnostic
and error messages. Streamlined choices shorten training time of new
employees. BENEFIT: Fewer operator errors.

• Superior product support through local, highly-skilled dealers.

BENEFIT: Faster repairs mean less downtime.

Safe chemical injection

Superior cylinder design

Contact Milnor for your local, authorized dealer:

Pellerin Milnor Corporation

P.O. Box 400 ● Kenner, LA 70063

t: 504-467-9591 ● f: 504-468-3094

B22SS10023/10334 Page 2 of 2

Solid industrial frame