Milnor MWR12E5 User Manual

25 – 60 lb. WASHER-EXTRACTORS

QUALITY, VALUE, DURABILITY n FOUR CAPACITIES n EASY-TO-USE CONTROLS

60 lb. capacity model MWR27E5

True commercial cabinet-style

washer-extractors at the RIGHT PRICE.

Milnor’s value-priced MWR-Series washer-extractors

range in capacity from 25-60 lbs. (11-27 kg).

Available in three controls, the MWR-Series offers

savings and flexibility–without compromising the

wash quality you expect from a Milnor.

MWR16E5 with E-P OneTouch control MWR18X4 with E-P Express control

Save Labor

The MWR-Series offers multiple ways to save on labor costs and improve employee efficiency. The three contols
(E-P One Touch®, E-P Express®, E-P Plus®) assist the operator in choosing the correct formula for goods and soil type,
which reduces rewash. The large cylinder volume generates greater productivity through enhanced mechanical
action, thorough rinsing and improved extraction. The result is more linen washed per day, or fewer hours required
to process the linen. The microprocessors and software are reliable and fast, which allows for quicker processing of
programmed formulas. This faster process time translates into cycles completing sooner–and more loads per operator.

Save on Linen Replacement Costs

The second highest expense in a laundry is the cost of the linen. Milnor’s MWR-Series can help you extend your linen
life with its safe chemical injection system. The manual soap chute is located on the top of the washer, giving you
easy access when injecting chemistry. For customers using automatic supply, the chemistry is diluted through the soap
chute, preventing any direct contact with the stainless steel or linen.

Save Energy

Milnor’s MWR-Series is efficient, reducing your utility bills. The Frequency Drive system features a single-motor
inverter drive that reaches maximum extraction speed gradually and efficiently, reducing peak electricity amperage
draw seen in multi-speed motors. The proper cylinder design features an increased perforated area, tall ribs, and
better extraction. These elements translate into excellent wash quality, better rinsing, and less drying time–saving on
dryer fuel.

Save Water

Milnor machinery is not only efficient, it’s eco-friendly. The MWR-Series helps you to reduce fresh water consumption
with its perforated cylinder and ribs that promote rapid drainage of gray water and reduce excessive rinsing. The
simple hot and cold water inlets fill the washer quickly and precisely. Unlike competitive models with multiple
valves that may overshoot the desired water level, the MWR-Series conserves water by maintaining accurate levels.
A third water inlet is used to thoroughly dilute chemistry to protect from direct contact that may damage linens.

Save Money (Total Cost of Ownership)

There are many features integrated into the MWR-Series that reduce your total cost of ownership–saving you money
for years after your initial investment. Milnor has engineered the MWR-Series frame to prevent stress concentration
in any one area, thereby insuring structural integrity during years of continued use. Before any machine is sold,
Milnor thoroughly tests every design for over 1,000 continuous hours in high extract, in an out-of-balance
state. Milnor’s extensive dealer network has been trained and certified to install and service your machine. Finally,

low initial capital ownership, coupled with proven Milnor engineering, makes the MWR-Series a wise investment.

Why choose Milnor?

Flexibility in control options, Durability in Design.

The MWR-Series fit
through a standard door.

1

(upright only)

Milnor’s cylinders have large perforations so the gray
water can drain away faster. They promote high wash

4

quality (intense interchange of chemistry with goods),
thorough rinsing, and enhanced extraction (trapped water can
escape the goods, too).

No need to remove the

door jambs during installation!

MILNOR

TYPICAL COMPETITOR

Frames are designed and
constructed from galvanized

2

steel to disperse stress evenly.
This gives you the long-lasting durability
you expect from Milnor.

Milnor’s cylinders have efficient inverter drives that produce
three speeds for optimum washing. Three* speed washing

5

(along with higher ribs) allows for better rinsing and intense
mechanical action factor (M.A.F.). The distribution
speed prevents vibration during extract by
evenly distributing the goods to the
periphery of the basket. This insures
optimum moisture extraction and
reduces dry times. The final
extract speed is keyed towards
today’s fabrics. Coupled with a
big cylinder (which means a thinner layer
of goods for water to pass through) and
large perforations, you have better extraction
in a Milnor.

Warranties attest to Milnor
endurance and confidence.

3

Consult your authorized
Milnor dealer or factory for specifics
on our 5/3 Warranty Plan.

*

E-P Plus has six speeds.

E-P OneTouch® control

This basic control features four pre-programmed wash formulas (based on soil type)
that are clearly identified by graphics for easy selection. The simple push buttons
activate the corresponding formula. Operators can see when the final step has been
initiated when the indicator light is illuminated. This notification increases productivity,
with less downtime between cycles.

®

E-P Express

This median control is equipped with 30 pre-programmed formulas that provide
flexibility in use. The bright display allows the operator to choose from real words,
not codes. The control features English/Spanish standard (other languages optional)
and diagnostic/error messages help shorten training time of new employees and
allow for fewer operating errors.

control

®

E-P Plus

This comprehensive control is equipped with 30 pre-programmed formulas (including
10 options for eight different industries) and allows the operator advanced flexibility.
The E-P Plus operator may manually create or alter formulas, which are guided by the
control itself to insure proper and accurate washing. The control also features universal
temperature control, programmable cooldown, programmable bath soak and
overnight soak. The two-line display notifies the operator of key benchmarks (wash
step, time remaining, etc.), which increases productivity and reduces downtime.

control

THREE CONTROLS

MWR-Series: Affordable Price. Durable Design.

Features at a glance:

 •Increased capacity for greater production

 •Simple, single motor design offers smooth operation

 •Three control options based on your needs

 •Three wash speeds deliver advantages over two-speed

models (E and X models only)

 •Six speeds offer increased advantages in washing ( J models)

 •Proper cylinder and rib design for enhanced mechanical

action factor, wash/rinse quality

MWR-Series Specifications

 •Soap chute and liquid soap connectors standard

 •Durable, galvanized steel frame (stress is spread evenly)

 •Bearings aligned in rigid housing

 •Double water seals protect bearings

 •5/3 Warranty Plan

 •All models fit through standard 36” door (upright only)

MWR12E5 MWR16E5 MWR18E4 MWR18J6 MWR27E5
MWR12X5 MWR16X5 MWR18X4
MWR12J5 MWR16J5

Maximum Capacity – lbs. (kg)* 25 (11) 35 (16) 45 (20) 45 (20) 60 (27)
Cylinder diameter – ins. (mm) 23 (584) 23 (584) 28 (711) 28 (711) 30 (762)
Cylinder depth – ins. (mm) 14 (356) 18 (457) 18 (457) 18 (457) 22 (558)
Cross cylinder volume – cu. Ft. (L) 3.37 (95) 4.3 (121) 6.4 (180) 6.4 (180) 9.0 (255)
Motor – HP 1 1.5 3 3 3
Wash speed – RPM** 32 32 32 32 32
Distribution speed – RPM** 64 64 64 64 64
Extract – RPM** 525 495 475 615 485
Extract G forces 90 80 90 150 100
Drain valve – ins (mm) 2 (51) 2 (51) 3 (76) 3 (76) 3 (76)
Inlet valve – ins. (mm) .75 (19) .75 (19) .75 (19) .75 (19) .75 (19)
Overall width – ins. (mm)
Overall depth – ins. (mm)
Overall height – ins. (mm)
Approximate net weight – lbs. (kg)

*Depending on density and soil content of goods **Approximate
***With standard accessories Specifications and appearance subject to change without notice. Contact factory for acoustics data.

***

26 (660) 29 (736) 34.44 (875) 34.44 (875) 34.44 (875)

***

34.94 (888) 42 (1067) 47.59 (1209) 47.59 (1209) 52.69 (1338)

***

42.38 (1077) 42.38 (1077) 52.63 (1337) 52.63 (1337) 55.23 (1403)

***

425 (193) 495 (225) 700 (318) 780 (354) 875 (398)

Pellerin Milnor Corporation
P.O. Box 400, Kenner, LA, 70063, USA
Phone: [phone] Fax: [phone]
Literature Hotline: [phone]
www.milnor.com
[e-mail]

© Pellerin Milnor Corporation

Printed in the USA

Brochure B22SL06003/12463