Milnor M7V48036 User Manual
®
CENTRIFUGAL EXTRACTORS
FOR AUTOMATED CBW®BATCH WASHING SYSTEMS
Model M9V4232C
Extract even the most delicate and difficult-to-handle fabrics –
Maximum extract speed - RPM (G force)
Dry weight capacity - lbs. (kg)
Cylinder diameter - ins. (mm)
Cylinder depth - ins. (mm)
Gross cylinder volume - cu. ft. (L)
Drive Motor - HP (kW)
Hydraulic Motor - HP++
Overall Width - ins. (mm)+
Overall Depth - ins. (mm)
Stationary Overall Height - ins. (mm)
Unloading Overall Height - ins. (mm)
Approximate net weight - lbs. (kg)
48036
M7V
750 (380)
up to 225 (102)
48 (1219)
36 (914)
37.7 (1067)
50 (37)
15 (11)
159.68 (4055)
14,200 (6441)
122.43 (3110)
166.4 (4227)
113.87 (2892)
42032 42032 42032
M9V MXV MMV
900 (483) 1000 (600) 1296 (1000)
65-130 (30-60)
42 (1067)
32 (813)
25.7 (728)
20 (14) 30 (22) 40 (30)
10 (7.45) 15 (11) 15 (11)
128.81 (3272)
12,000 (5442)
114.56 (2911)
128.87 (3273)
93 (2362)
48040
M9V
840 (480)
up to 250 (115)
48 (1219)
40 (1016)
41.9 (1186)
60 (45)
15 (11)
122.43 (3110)
166.4 (4227)
113.87 (2892)
159.68 (4055)
14,200 (6441)
automatically in a CBW
®
batch washing system
Milnor’s centrifugal extractor – teamed with
®
a CBW
batch washer – brings full automation
to processing all types of linen, even the most
delicate and difficult-to-handle fabrics. This
broadens the opportunities to use continuous
batch washers, with their inherent savings.
The extractor can be paired with any size
Milnor tunnel washer. With cycle times as low
as 2 minutes, depending upon goods and
programming, Milnor’s centrifugal extractor
an produce up to 25-30 loads per hour.
c
Single motor inverter produces a full range of
speeds.
Automatic loading and
unloading.
The hydraulic system of Milnor’s centrifugal
extractor is designed to tilt quickly for fast turnaround between loads.
Extracts polycottons and
barrier cloth with ease.
Milnor’s centrifugal extractor works especially
well with polycotton goods such as
uniforms. Low moisture retention – without
setting wrinkles – allows these uniforms to go
directly to a steam finishing tunnel. The result
is faster, higher output plus a superior finish.
The machine’s ability to remove water gently
and efficiently also allows extraction of
multifilament or membrane-type barrier cloth
for operating rooms – as well as 100% polyester napery. Maximum moisture removal
reduces drying times and saves fuel.
A variety of
configurations.
This versatile centrifugal extractor can be
built and engaged in a variety of configurations:
• A single centrifugal extractor can receive
a load directly from a tunnel washer, with
side or in-line discharge directly into carts or
sent to automatic dryers.
• Multiple centrifugal extractors can be
used with a single CBW batch washer in
higher-production plants.
• A combination of centrifugal and
membrane press extractors can be
configured for mixed-goods plants.
• 4 programmable extract speeds.
Reduces mat
post-processing.
Low moisture retention is achieved with
either cotton or synthetic mats – even up
Centrifugal Extractor
Milnor’s centrifugal extractor has cylinder
speeds up to 1296 RPM, producing
1000 Gs for excellent moisture removal.
Pre-extract load distribution speed
inimizes out-of-balance conditions.
m
Single-motor inverter produces a full
range of speeds.
Paired with a Milnor tunnel washer,
the centrifugal extractor combines
ersatility with automation.
v
to 4’ x 10’. That minimizes post-processing requirements.
Benefits are time, labor, and fuel savings.
During extraction, the machine automatically distributes
mats evenly inside the cylinder. Moreover, the machine’s
optional split extract cycle helps prevent “water burst,”
since sudden pressure is not applied to pockets of water
common with some types of goods.
With a steady stream of easily-handled batches of mats,
continuous production is achieved.
Other features...
• Microprocessor control links to washer and dryer
controls for completely automated system.
• Suspension system isolates vibration for high
speed operation.
• Bearing housing supported 360° by massive
ring-of-steel design.
• Dynamic braking shortens turnaround time.
(No wearable discs or pads.)
• Links to Mildata
management (ask us for a brochure).
®
computer system for total plant
Pellerin Milnor Corporation
P.O. Box 400, Kenner, LA 70063-0400 USA
504/467-9591
800/469-8780
Fax: 504/468-3094
E-mail: mktg@milnor.com
www.milnor.com
Printed in U.S.A.
© Pellerin Milnor Corporation, 2000
Class 5-9 Brochure B22SL00005/10174
®
Specifications
+ Add 36 ins. (914 mm) for freestanding controls. ++ Intermittent duty, sized for fast filling.
Specifications are approximate.
Specifications and appearance are subject to change without notice.
Loading...