M5050ED
50-lb x 2 Capacity Stack Dryer
Standard Features:
• 50-lb. x 2 capacity
• Self-Diagnostic Microprocessor Control
• 100% Axial Airflow
• Completely Sealed Basket
• Non-Perforated Ribs and Basket
• Dual-Paned Door Glass
• Four-Point Roller Support System
• F.S.S. (Fire Suppression System)
Optional Features:
• Stainless Steel Front, Cabinet & Basket
• Residual Moisture Control
• Single Phase Reversing
OPL
Why Purchase Milnor EcoDry?
100% Axial Airflow (standard)
EcoDry tumblers incorporate a 100% axial airflow design with a
completely sealed basket. This ensures the most efficient drying
available on the market today without sacrificing dry times.
Four-Point Roller Support System (standard)
EcoDryers are designed with a four-point roller support system, eliminating costly repairs and downtime due to
trunnion failures.
Available Option: Single Phase Reversing
Single Phase Reversing is an optional feature on the M5050ED. What once was an expensive option requiring an upgrade
from single phase to three phase electrical service is now available in single phase. A reversing tumbler ensures that the
load doesn’t “rope” or “ball up”, providing a quicker, more even drying process.
Available Option: Residual Moisture Control
Single Phase Reversing is an optional feature on the M5050ED. What once was an expensive option requiring an upgrade
from single phase to three phase electrical service is now available in single phase. A reversing tumbler ensures that the
load doesn’t “rope” or “ball up”, providing a quicker, more even drying process.
M5050ED OPL Stack Dryer
Your local Milnor independent authorized dealer.
www.milnor.com
M5050ED
M5050ED Specifications
Tumbler Capacity (dry weight per pocket) 50 lbs. (22.68 kg) x 2
Tumbler Diameter 32-3/4” (83.19 cm)
Tumbler Depth 32-3/4” (83.19 cm)
Tumbler Volume
Tumbler/Drive Motor
Blower/Fan Motor
Door Opening
Door Sill Height
F.S.S. Water Connection
North America
Dryers per 20’/40’ Container 8 / 16
Dryers per 48’/53’ Truck 25 / 27
Width 34-1/4” (87.0 cm)
Depth 56-3/8” (143.19 cm)
Height 83-3/4” (212.73 cm)
Airflow
per pocket 60 Hz
50 Hz
Exhaust Connection 8” (20.32 cm)
per pocket 16 cu ft (453.0 L)
per pocket 1/3 hp (0.25 kW)
per pocket 1/2 hp (0.37 kW)
(Diameter) 23-3/4” (60.3 cm)
top pocket / bottom pocket 54-1/2” (138.43 cm) /
12” (30.5 cm)
Outside North America
N/A
N/A
540 cfm (15.20 cmm)
480 cfm (13.59 cmm)
GAS MODEL:
Approx. Net Wt.
Approx. Ship Wt.
Heat Input
Inlet Pipe Connection
* Not available in electric or steam models.
** Specications in parentheses are metric equivalents.
per pocket
(CE and Australia Only)
Electrical Service Specifications
SERVICE
VOLTAGE
For stack machines, values are per pocket
PHASE
SERVICE
120 1ø 2 13.8 -- 20
200 1ø 2 9.7 -- 15
208 1ø 2 9.7 -- 15
220 1ø 2 9.4 -- 15
240 1ø 2 9.3 -- 15
WIRE
APPROX AMP DRAW
60 Hz 50 Hz
GAS
860 lbs (390 kg)
925 lbs (419 kg)
110,000 btu/hr
(27,720 kcal/hr)
1/2” M.N.P.T.
1/2” F.B.S.P.T
CIRCUIT
BREAKER
10/21/10
Pellerin Milnor Corporation, PO Box 400, Kenner, LA 70063 USA,
Phone 504.712.7656 Toll Free: 800.469.8780 Fax: 504.468.3094
www.milnor.com