Milnor M310 User Manual

®

M310 DRYER

WIDE RANGE OF STANDARD FEATURES • TWO-WAY TILT OPTION

M310 DRYER – VERSATILE AND PRODUCTIVE

The features you need.

The M310 comes with a variety of standard features that increase
productivity and enhance ease-of-use. For example:

• Advanced microprocessor accurately controls dryer
function with easy, push-button commands.

• High-powered, efficient
heatsources (see below for
more information).

• Reliable roller-driven basket.

• Durable 14-Gauge stainless
steel basket.

• Extra large blower motor for
fast drying.

• Large-capacity, easy-to-clean
front lint basket.

• Electrostatic powder-paint finish
is applied inside-and-out and
baked-on at 420°F for long life.
(Most dryers are assembled and
then painted only on the outside.)

• Permanently-lubricated motor bearings.

• Can be integrated with an automatic conveyor system.

• Reversing feature helps prevent wrinkling.

• Cabinet and access panels are fully insulated to reduce
environmental noise and heat.

• Rotational sensor adds an extra element of safety.

• Hinged front panel for maintenance ease.

Gas models use a microprocessor-controlled, instantaneous spark ignition
system coupled with twin atmospheric burners. This system generates
1,125,000 Btu per hour heat input. Coupled with a large blower motor,
the gas model delivers fast, efficient drying.

Steam model dryers use a steam damper system, which allows the coil to
stay constantly charged, eliminating repeated expansion and contraction.
When the damper is opened, the air immediately passes through the already
hot coil, providing instant heat to start the drying process. When the damper
is closed, ambient air is drawn directly into the basket, allowing a rapid cool
down. This system eliminates troublesome steam valves.

Reliable drive system.

Four 11-inch diameter wheels support the stainless steel basket. These wheels
protect the drive bearing by keeping it out of the heat stream.

Tilting and door options.

The M310 can assist loading and unloading through one- and two-way tilting
options, as well as either single front door or front- and rear-door options
(pass-through). Doors can be ordered as manually-operated or automatic,
air-operated. The controls can be integrated with automatic load and
unload conveyor systems. This flexibility makes the M310 a suitable dryer for
a variety of laundries.

Easy to service.

All major electrical and pneumatic components are conveniently located
for ease of connection and maintenance. Electrical panel doors use keyed
locks for safety. Hinged front and side panels enhance serviceability.

Other features…

Available options are:

• Poly-coated basket to prevent plastics from sticking to the drum.

• Fire Suppression System (FSS).

• Outside air adapter (on non-tilt models only). Should outside air be a
requirement, the outside air adapter brings fresh make-up air from the
outdoors directly to the dryer.

Specifications

Max. load size – lbs. (kg) 310 (141)
Basket volume – cu. ft. (L) 106.5 (3016)
Basket diameter – ins. (mm) 62.5 (1588)
Basket depth – ins. (mm) 60 (1524)
Blower motor – HP 15+/25++
Basket drive motor – HP 5
Overall width* – ins. (mm) 79.12 (2009)
Overall depth* – ins. (mm) 75 (1905)
Max tilting depth* – ins. (mm) 111.5 (2832)
Overall height (non-tilt)*+ – ins. (mm) 116.37 (2955)
Max. tilting height*+ – ins. (mm) 122.43 (3109)
Net weight*+ – lbs. (kg) 5,000 (2267)

GAS MODELS

Airflow – cfm (cmm) 6,500 (184)
Heat input – Btu/hr (kcal/hr) 1,125,000 (283,500)
Gas inlet – ins. (mm) 1.5 (38.1)
Exhaust diameter – ins. (mm) 24 (610)

A M310 dryer is an ideal match for washers up to
275 lb. (125 kg) capacity and take up less floor space.

Advanced control for top results.

An exclusive microprocessor is the most simple and efficient control. To start
the machine, the operator merely selects one of six letters (A through F) and
the dryer immediately begins a preprogrammed cycle which has been
pre-chosen by the laundry manager. The microprocessor is capable of
retaining up to 47 preprogrammed cycles.

An auto cycle allows the dryer to automatically stop when goods are dry.
“Anti-wrinkle” allows the dryer to cycle in a cool down mode after the cycle

has finished. With “anti-wrinkle” the dryer can be programmed to tumble
without heat. This feature can automatically reduce wrinkling and significantly
reduce the risk of spontaneous combustion.

STEAM MODELS

Boiler HP 35
Airflow – cfm (cmm) 8,500 (241)

Capacity depends on type of goods – e.g., ranging from various fabrics/cot­ton goods to mats or wipers. Specifications and appearance subject to
change without notice.

* Approximate and with standard accessories. + Gas model. ++ Steam model.

Pellerin Milnor Corporation
P.O. Box 400, Kenner, LA 70063-0400 USA
504/467-9591, Ext. 222
800/469-8780

®

Fax: [phone]
E-mail: [e-mail]
www.milnor.com

Printed in U.S.A.
© Pellerin Milnor Corporation, 2000
Class 5-1 Brochure B22SL00006/07202