Milnor 60044 WP2 Specifications

y

60044 WP2

450 LB. (204KG) CAPACITY

IVIDED-CYLINDER WASHER-EXTRACTOR

D

Capacity – lbs (kg) 450 (204)
Cylinder Diameter x Depth – ins (mm) 60 x 44 (1524x1118)
Cylinder Door Area – sq. in. (sq. cm) 538 (3471)
Cylinder Volume – cu. ft. (L) 72 (2039)
Machine Dimensions

(W x D x H) – ins (mm)
Shipping Dimensions
(W x D x H) – ins (mm)

Motor – HP (kW) 50 (37.28)
Wash Speed – RPM 27
Distribution Speed – RPM 45
Extraction Speeds – RPM 305-610
Extraction G-Force 317

Static Weight – lbs (kg) 
Max. Dynamic Load RMS - lbs (kg) 
Frequency (Hz) 10.17
Water Pressure

Water Valve Cv Rating – gal/min (L/min) 110 (416.4)

MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS

114.25x83.62x93.31
(2901x2123x2387)
91 x 128 x 101
(2311x3251x2565)

15,337 (6956.5)

2015.87 (914.38)

(Required)

– psi (bar) 30-65 (2.06-4.48)

B22SL10039/10534 Page 1 of 2

SPECIFICATION SHEET

LEGEND

Compressed air inlet connection .25” (6

A

mm) NPT

C Cold water inlet 2” (51 mm) NPT

D Drain valve 8” (203 mm) diameter

E1 Electrical connection

E2 Emergency stop

F Anchor bolt holes 1.06” (27 mm)

H Hot water inlet 2” (51 mm) GHT

L1 Peristaltic supply connection

L2 Soap chute

Steam inlet connection 1.25” (32 mm)

S

NPT

Voltage Running

Amps

208/3/60 60 FRN110 200
220/3/50-60 56.5 FRN100 200
240/3/60 51.5 FRN100 200
380/3/50-60 33 FRS60 125
400/3/50 31 FRS60 125
415/3/50 30 FRS60 100
480/3/60 26 FRS50 90
600/3/60 21 FRS40 70

See Fuse and Wire Size manual MAEFUSE1BE for safety information.

▼ See dimensional drawing for complete details.

It is the sole responsibility of the owner/user to assure that the floor and/or any



other supporting structure exceeds not only all applicable building codes, but also
that the floor and/or any other supporting structure for each washer-extractor or
group of washer-extractors has sufficient strength and rigidity (i.e., a natural or
resonant frequency many times greater than the rotational machine speed with a
reasonable factor
including the weight of the water and goods, and including the published 360º
rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the
factory for additional machine data for use by a structural engineer.

of safety) to support the weight of all the fully loaded machine(s)

Fuse

(Amps)

Circuit Breaker

(Amps)

W

60044 WP2

450 LB. (204KG) CAPACITY

IVIDED-CYLINDER WASHER-EXTRACTOR

D

Standard Features:

• Rapid Load split pocket cylinder

• AUTOSPOT™ cylinder positioner

• MarkVI programmable controller

• Color graphic display

• Single-motor inverter drive

• Air-operated valves

• Programmable overnight bath soak

• Programmable water temperature for each bath

• Hydro-Cushion™ suspension

• Spherical roller bearings

• Large cylinder perforations

• Twenty (20) liquid chemical injection ports

• Control reads in English/second language

• 5-year limited warranty on frame, cylinder & shell

hy Purchase Milnor?

• With Rapid Load split pocket cylinder (with only a single partition), both pockets

are open at one time for loading. BENEFIT: Faster loading and greater lift and

drop action for outstanding soil removal.

• MarkVI Controller with color graphic display allows operator to choose formulas

from real words, not codes. Standard controller features English/Spanish (other
languages optional). Controller also provides diagnostic and error messages.
Shortens training time of new employees.

BENEFIT: Fewer operator errors.

• 317-G high extract provides excellent moisture removal. Lower extract speeds

are available for uniforms, delicate textiles and blended fabrics.

BENEFIT: Better extraction saves dryer fuel.

• 20 liquid chemical ports, 15 signals, and optional 5 compartment supply injector.

BENEFIT: Promotes consistency and allows flexibility.

• Larger cylinder perforated-area generates better wash quality, better rinsing and

better extraction. BENEFIT: Better extraction saves dryer fuel.

• Faster process times reduce fabric wear, promoting longer linen life!

BENEFIT: Saves linen replacement costs.

• Superior product support through local, highly-skilled dealers.

BENEFIT: Faster repairs mean less downtime.

Contact Milnor for your local, authorized dealer:

Pellerin Milnor Corporation

P.O. Box 400 ● Kenner, LA 70063

t: 504-467-9591 ● f: 504-468-3094

SPECIFICATION SHEET

Optional Features:

• 5 compartment flushing

supply injector

• Programmable Air-

Operated steam
injection

Safe chemical injection

Superior cylinder design

Hydro-Cushion™ suspension

B22SL10039/10534 Page 2 of 2