Milnor 48040 F7B User Manual
48040 Suspended Washer-Extractors.
275 lb. (125kg) capacity delivers fast production.
Milnor’s 48040 open-pocket washer-extractors are designed for fast production and excellent wash quality. With 300 G
extraction rates and a choice of controls and tilt options, these machines are a good choice for high-production laundries.
Easy loading/unloading.
Big 30" (762 mm) door opening, at 37" (940 mm) height, facilitates
material handling. This reduces operator fatigue and helps increase
run time.
Save steps in loading/unloading. Tilt options available!
This model loads and unloads quickly and easily due to its open-pocket design. With no cylinder dividers, no cylinder
repositioning is needed and there’s only one door to open. The 48040 is available in two-way tilt models, as well as stationary
models. Gravity assist minimizes effort, reducing fatigue while helping prevent strain. Goods can be dumped into a cart or onto
a conveyor. Two-way tilt models also tilt backward so gravity aids manual loading, as well as loading by slings or other means.
Suspension cushions vibration.
Hefty, dynamically tuned suspension is based on designs used in Milnor’s 750 lb. (340 kg) washerextractors. The center of mass is located where an imbalance would occur. Dynamic forces are evenly
applied for minimum vibration, less wear and tear. Also means greater output because it prevents
stopping-and-recycling. Innovative "smooth coil" rubber springs reduce vibration.
A choice of speeds.
Simple inverter drive produces all speeds needed. You get the best speeds for a wide variety of fabrics.
665 RPM high-speed extract.
High-speed extract is 665 RPM, yielding 300 Gs. Great for all-cottons! (There are lower extracts for
polyesters.) This reduces dry times and increases washroom productivity.
Only 1 single-speed motor.
Inverter drive gets all speeds from only one single-speed motor. No troublesome idler pulley is needed. The
energy efficient drive also reduces peak load demand.
Typical Milnor ruggedness.
Tough frame – designed through computer analysis – disperses stress evenly for long life.
Versatile microprocessor controls.
Microprocessors are easy to operate, with the versatility to handle many applications. E-P Plus® control
(48040 F7J/F7B) offers 30 formulas, 10 pre-programmed specifically for each of 10 different markets. All
are programmable.
Mark VI microprocessor (48040 F7W/F7N) provides 100 formulas, 98 programmable. It’s the same
control used on larger Milnor washer-extractors. Both have informative displays and formula counters to
aid supervision.
SPECIFICATIONS
NON-TILT TILT
F7J AND F7W F7B AND F7N
Max. capacity* – lbs. (kg)
Cylinder volume – cu. ft. (L)
Cylinder diameter – ins. (mm)
Cylinder depth – ins. (mm)
Motor – HP (kW)
Wash 1 – RPM ***
Wash 2 – RPM ***
Distribution – RPM ***
Extract 1 – RPM ***
Extract 2 – RPM ***
High Extract – RPM
High Extract G forces
Drain valve – ins. (mm)
Inlet valves – ins. (mm)
Overall width** – ins. (mm)
Overall depth** – ins. (mm)
Overall height** – ins. (mm)
Overall weight** – lbs. (kg)
Specifications and appearance subject to change without notice.
Contact factory for acoustics data.
* Depending on density and soil weight of goods
** With standard accessories
*** Approximate
Automatic supply injection.
Fittings are provided for 10 liquid supply tubes. Both control systems
come standard with five supply signals – additional signals are optional.
Easy servicing.
Top-mounted motor is easy to service. Controls and other
components are quickly accessible. Self-diagnostics help shorten
– or even avoid – service calls. Easy-to-reach floor bolt holes aid
installation, too.
275 (125)
42 (1188)
48 (1219)
40 (1016)
25 (18.6)
30 --37 --60 --345 --500 --665 --300 --4 (102)
1.5 (38)
82.5 (2096)
95.9 (2436)
98.25 (2496)
9,000 (4082)
275 (125)
42 (1188)
48 (1219)
40 (1016)
25 (18.6)
30 --37 --60 --345 --500 --665 --300 --4 (102)
1.5 (38)
85.5 (2172)
112 (2844)
105.25 (2673)
9,000 (4082)
Printed in U.S.A.
© Pellerin Milnor Corporation
Class 5-8 Brochure B22SL99002/08202
Pellerin Milnor Corporation
P.O. Box 400, Kenner, LA 70063-0400 USA
504-712-7656 • 800-469-8780
Fax: 504-468-3094
E-mail: mktg@milnor.com
www.milnor.com
Loading...