Milnor 42044 SP2 User Manual
Model 42044:
• 220 lb. (100 kg) capacity
• High extraction of 300 Gs
RAPID LOAD
RAPID LOAD
Faster loading
Model 60044:
• 450 lb. (200 kg) capacity
• High extraction of 317 Gs
Two pockets for higher productivity
and superior wash quality
Faster Unloading
For easy removal of goods, the load is uffed by
a tumble cycle after extraction. Then the cylinder
is rotated to locate the load directly in front
of the door - about 18° below horizontal for
unloading. (With AUTOSPOTTM, positioning is done
automatically, in seconds).
Model 72044:
• 700 lb. (318 kg) capacity
• High extraction of 300 Gs
Both pockets are open at one time for loading.
(No need to load one pocket, close the doors,
inch the cylinder, and then open another set of
doors to load the other pocket.)
The second pocket is unloaded just as easily by
turning the cylinder to this position. AUTOSPOT does
the job easily and accurately.
Microprocessor is
simple, versatile.
Microprocessor controller provides 100 formulas, 98 fully
eld-programmable. Display gives operating information,
plus prompts for each programming step. Help messages
occur automatically or as requested. Formulas can
be added, created, deleted, or modied in a single
programming mode. Formulas may be downloaded and/
or printed and data can be accumulated and printed.
Accurate temperature control.
Desired temperature can be programmed into each step
of a formula – allowing innite temperature settings.
Better Washing Action
RAPID LOAD’s large 60-in. diameter cylinder -
divided by only a single partition - provides
greater dropping action for outstanding soil
removal. Reversing action (note arrows)
prevents tangling.
Automatic supply injection
promotes consistency.
20 ushing liquid chemical ports and 15 signals
provide exibility. Optional 5 compartment ushing
chemical chute available.
Loading...