Milnor 42032 X7J User Manual
42032 X7J
g
170 LB. (77KG) CAPACITY
USPENDED WASHER-EXTRACTOR
S
SPECIFICATION SHEET
LEGEND
A Main air .25” (6 mm) NPT
C Cold water inlet 1.25” (32 mm) NPT
D Air operated drain 3” (76 mm) PSJ
E Electrical connection
F Anchor bolt holes 1.06” (27 mm)
G Chemical flush .75” (19 mm)
H Hot water inlet 1.25” (32 mm) NPT
L1 Soap chute
L2 Liquid soap inlets
L3 Optional 10 port peristaltic
MECHANICAL SPECIFICATIONS
Capacity – lbs (kg) 170 (77)
Cylinder Diameter x Depth – ins (mm) 42 x 32 (1067 x 813)
Cylinder Volume – cu. ft. (L) 25.76 (727)
Door Opening – ins (mm) 26 (660)
Machine Dimensions
(W x D x H) – ins (mm)
Shipping Dimensions
(W x D x H) – ins (mm)
62.9 x 80 x 88.75
(1598x2032x2254)
70 x 88 x 94
(1778x2235x2388)
Motor – HP (kW) 15 (11.2)
Wash Speeds – RPM 36-40
Distribution Speed – RPM 60
Extraction Speeds – RPM 400-710
Extraction G-Force 300
Static Weight – lbs (kg)
Max. Dynamic Load RMS – lbs (kg)
6183 (2804)
902 (409)
Frequency (Hz) 11.83
(Required)
Water Pressure
– psi (bar) 10-75 (0.69-5.17)
Water Valve Cv Rating – gal/min (L/min) 12.9 (48.83)
Minimum Recommended Distance
Between Machines – ins (mm)
B22SS10019/12383 Page 1 of 2
12 (305)
ELECTRICAL SPECIFICATIONS
Voltage Running
Amps
Fuse
(Amps)
Circuit Breaker
(Amps)
208/3/60 40 FRN50 50
220/3/50-60 38 FRN50 50
240/3/60 35 FRN50 50
380/3/50-60 23 FRS30 30
415/3/50 21 FRS25 25
480/3/60 19 FRS25 25
See Fuse and Wire Size manual MAEFUSE1BE for safety information.
See dimensional drawing for complete details.
▼
It is the sole responsibility of the owner/user to assure that the floor and/or any
other supporting structure exceeds not only all applicable building codes, but also
that the floor and/or any other supporting structure for each washer-extractor or
group of washer-extractors has sufficient strength and rigidity (i.e., a natural or
resonant frequency many times greater than the rotational machine speed with a
reasonable factory of safety) to support the wei
including the weight of the water and goods, and including the published 360º
rotating sinusoidal RMS forces that are transmitted by the machine(s). Contact the
factory for additional machine data for use by a structural engineer.
ht of all the fully loaded machine(s)
W
42032 X7J
170 LB. (77KG) CAPACITY
USPENDED WASHER-EXTRACTOR
S
Standard Features:
• 6 speeds
• E-P PLUS
• Vacuum fluorescent display
• Single-motor inverter drive
• Tall, lifting ribs
• Tapered roller bearings
• High M.A.F. (Mechanical Action Factor)
• Large cylinder perforations
• Fresh-water flushing chemical manifold
• Auto tension V-belt drive
• Six (6) liquid chemical injection ports
• Control reads in English/second language
• 5-year limited warranty on frame, cylinder & shell
(2 wash, 1 distribution, 3 extract)
®
programmable controller
SPECIFICATION SHEET
Optional Features:
• Steam
• Electric heat
• 5 compartment flushing
supply injector
hy Purchase Milnor?
• Larger cylinder volume than most competitive similar sized washer-extractors
provides greater productivity. More linen washed per day, or fewer hours required
to process. BENEFIT: Saves labor.
• Greater cylinder perforated-area generates better wash quality, better rinsing and
better extraction. BENEFIT: Better extraction saves dryer fuel.
• Faster process times reduce fabric wear, promoting longer linen life!
BENEFIT: Saves linen replacement costs.
• Tall perforated ribs provide excellent lift and high drop.
BENEFIT: Greater mechanical action (M.A.F.) leads to better wash quality.
• 300-G high extract provides excellent moisture removal. Lower extract speeds
are available for uniforms, delicate textiles and blended fabrics.
BENEFIT: Better extraction saves dryer fuel.
• E-P Plus Controller with vacuum fluorescent display allows operator to choose
formulas from real words, not codes. Standard controller features English/Spanish
(other languages optional). Controller also provides diagnostic and error
messages. Shortens training time of new employees.
BENEFIT: Fewer operator errors.
• Superior product support through local, highly-skilled dealers.
BENEFIT: Faster repairs mean less downtime.
Safe chemical injection
Superior cylinder design
Contact Milnor for your local, authorized dealer:
Pellerin Milnor Corporation
P.O. Box 400 ● Kenner, LA 70063
t: 504-467-9591 ● f: 504-468-3094
B22SS10019/12383 Page 2 of 2
SmoothCoil™
Suspension System
Loading...