Limited Warranty
We warrant its products to be free from defects in materials and workmanship(normal wear
and tear, fading and stretching excepted), for one year from the date of purchase,except as
provided below under the limited warranty.
The exceptions or exclusions to this warranty are as follows:
1. Any warranty claim that is submitted after the limited warranty period, or without proper proof of
purchase will not include the cost of parts, labor, or delivery.
2. This warranty shall not apply to products which have been subjected tomisuse, neglect,
alteration, modification, or attachments, either caused by the original purchaser,shipping,
storage, accident, fire, flood, or acts of God.
In the event of a defect in material or workmanship covered by this warranty, We willrepair or
replace, at their discretion, without charge the warranted furniture within a reasonableamount of
time. We reserve the right to require damaged parts to be returned to us upon request.Natural
markings such as scars, brands, grain variations, wrinkles, color variations, etc. will beconsidered
normal characteristics and not construed as defects. We cannot warrant leatheragainst
scratching or scuffing, as all leather is subject to blemishes with use.
For claims or questions concerning this warranty, please contact us. Be prepared to provide your
name, address, daytime phone number, the model and purchase order number of the product, date
of purchase, and the store where it was purchased. We require that the original
sales receipt be submitted with all requests to confirm that you are the original purchaser according
to our written warranty.
Bonded Leather Sofa & Loveseat
Assembly Instructions
This warranty gives you specific rights, and you may also have other rights, which vary from state to
state.
All warranties are limited to the original purchaser for normal use by a maximum of two users. Total
weight capacity is 500 pounds or less for two users, or 250 pounds or less for a single user.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Instructions
Thank you for selecting one of our
seating solutions.
We are committed to excellence. Our primary objective is to provide fast,
friendly customer service to all of our customers.
We are here to help if you have any
questions, comments, or are in need
of warranty replacement parts.
Step 6 --
F
Open the vacuum packed Seat Cushions (F) by carefully cutting
the bags with a pair of scissors. Insert the Back Cushions (H) into
the appropriate Back Covers (I). Insert the Seat Cushions (F) into
the appropriate Seat Covers (G). Remember to keep the top side
of the Seat Cushions (F) with the top side of the Seat Covers (G).
Fluff all cushions to allow them to expand. Lastly, position all
cushions on the sofa. Seat and back cushions may take 24-48 hours
to fully expand, which will allow wrinkles and indentations caused by
packing to fade.
G
F
I
H
Diagram 1
Diagram 2
ATTENTION: To close the zipper, please follow diagram 1. Failure to follow this
could result in damage to the zipper.
Page 1 Page 10
Step 5 --
Secure the bottom and back flaps with hook and loop tape.
Remove the plasic caps on the threaded bolts of each leg. Attach
the 2 Wood Legs with Washers (C) to the middle holes of the sofa.
Attach the Wood Legs (B) to the corners of the sofa.
NOTES:
• Please read the instruction sheets completely before
assembly.
• Remove all parts from carton and ensure all parts are
included prior to assembly.
• Assemble the sofa or loveseat on a protected surface to
avoid scratching the components.
• Be careful not to cross-thread screws.
• Do not use power tools.
• Two people are recommended for assembly!
B
• Seat and back cushions may take 24-48 hours to fully
expand, which will allow wrinkles and indentations caused
by packing to fade.
C
C
B
B
Page 9 Page 2
Assembly Instructions
Thumb Bolts
A B C
(5)
D1
Arm and Seat Frame
Wood Legs with
Washers (4)
D2
with “L” Label (1)
Wood Legs with
Washers (2)
Arm and Seat Frame
with “R” Label (1)
Step 4 --
D2
Move the two assembled parts together. Align the holes of Seat
Frames (D) and Back Frames (E) to the other side and secure with
three Thumb Bolts (A). Ensure all Thumb Bolts (A) are completely
tightened.
E2
E1
D1
A
E1 E2
Back Frame with
“L” Label (1)
Page 3 Page 8
Back Frame with
“R” Label (1)
Parts List
Step 3 --
Turn over the Arm and Seat Frame with “L” Label (D1) and slide the
Back Frame with “L” Label (E1) into the seat frame until fully
engaged. Align the holes of the Back Frame (E1) to the Arm Frame
(D1) and secure with one Thumb Bolt (A).
E1
D1
E1
Seat Cushions
F G
(Left & Right) (2)
Back Cushions
H
(Left & Right) (2)
Seat Covers
(Left & Right) (2)
Back Covers
I
(Left & Right) (2)
Important! Please read:
Parts H, E1 are inside of
part D1. Parts H, E2, A, B
and C are inside of part
A
Page 7 Page 4
D1
D2.
Assembly Instructions
Step 1 --
H
Remove all parts from the carton and place them on a protected
surface or carpet. Place the Arm and Seat Frames (D) upside
down and open the bottom flap. Take the Back Cushions (H),
Wood Legs with Washers (B & C), Back Frames (E) and Thumb
Bolts (A) out of the seat box.
D
D
H
Step 2 --
Turn over the Arm and Seat Frame with “R” Label (D2) and slide the
Back Frame with “R” Label (E2) into the seat frame until fully
engaged. Align the holes of the Back Frame (E2) to the Arm Frame
(D2) and secure with one Thumb Bolt (A).
E2
D2
D
E2
E
C
D
E
B
A
A
D2
D
D
Page 5 Page 6
Loading...