Millwood Pines FOME6301 Assembly Instructions

Page 1
SUNLOUNGER
Caution : You must read this before you proceed
CAUTION : This Sunlounger is NOT a TOY.
Keep your child / children at bay in the process of assembly. For turning the sunlounger and to prevent damage to the sunlounger 02 people may be needed to execute this action.
Page 1 of 6
Page 2
Label Picture Description QTY
Label Picture Description QTY
Foldable seat panel 1
Leg frame 3
Bolt (M6x30mm) 13
Sleeve Nut
13
(M6x13mm)
Allen Key 2
Before Beginning Assembly:
Page 2 of 6
Page 3
Overview
Leg frames (B)
Foldable seat panel(A)
FRONT FACING
This Sunlounger has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Sunlounger parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1
Unpack and place all parts on a clean, non-marring surface.
Page 3 of 6
Page 4
Step 2
Step 2.1
A
Step 2.2
2.1) Place the Sunlounger to a flat surface with the seat area up side down to the ground.
2.2) Unfold the backrest as shown in picture above.
Step 3
B
A
Attach Leg frame (B) to Foldable seat panel (A) by using Bolt (①), Sleeve nut (②) and Allen Key () as shown in picture above. Repeat the same process to attach 2 remaining Leg frames (B) to Foldable seat panel (A) Do not fully tighten the Bolts.
Page 4 of 6
Page 5
Step 4
With assistance from your adult partners, turn the Sunlounger right side up. EXERT pressure, floorwards, onto the Seat. This pressure will help the Legs and seat panel reach alignment at all joints. Check for wobbles. In a sequential manner, gradually tighten all Bolts until evenly secured. Inspect the Sunlounger and make sure all parts are adequately connected. Your Sunlounger is ready for use. This Sunlounger can only be used on a flat, level surface.
Page 5 of 6
Page 6
Do not put hot items directly on furniture surface
Do not clean furniture with harsh cleansers or polish
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is
recommended
Children should not climb or jump on the furniture
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the product and /or place under patio or awnings.
Not for commercial use. For residential use only .
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth
Stains may be removed with mild soap solution and damp cloth
Dust and pick-up spills using a clean, non-colored, lint-free cloth .Dust and pick-up spills using a clean, non-colored, lint-free cloth .
.
.
.
.
.
Page 6 of 6
Loading...