Page 1
Adirondack Chair
Assembly Instructions
Thank you for choosing our products!
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please contact us.
Page 2
HARDWARE (included)
¼” X 2” Bolts (10)
Allen wrench (1)
PARTS (included)
STEP 1
Lay out & identify all parts & hardware pieces
STEP 2
Place the seat on a clean surface with the seating
area facing up. Put the back assembly between the
back legs behind the seat, aligning the predrilled
holes in the legs with the threaded inserts on the
bottom of the back assembly. Put two 2” bolts
through the legs & turn into the inserts. Semi-tighten
with the Allen wrench. Do NOT fully tighten any bolts
until entire chair is assembled.
STEP 3
Attach the arm & leg assemblies to the chair.
Align the predrilled holes in the front leg with the
inserts in the side of the seat. Put 2” bolts through
the legs, turn into the inserts in the seat & semitighten with the Allen wrench. Please Note: There
is a right & left arm (the little brace should be on
the outside of the chair).
STEP 4
Attach the back of the arms to the back assembly.
Put a 2” bolt through the predrilled hole in the
arms & turn into the threaded insert in the side of
the back assembly. Please Note: If you have
problems aligning the holes, loosen the other bolts
& push (or pull) the back to the proper position.
You can now fully tighten all bolts with the Allen
wrench.
Right Arm
& Leg
Assembly
Seat
Assembly
Left Arm
& Leg
Assembly
*Please note: other chairs follow same assembly instructions
Back
Assembly *
Loading...