Miller Electric WeldCraft W-250, WeldCraft W-250V, WeldCraft W-225, WeldCraft W-200, WeldCraft WP-20, WeldCraft WP-20V, WeldCraft WP-20P, WeldCraft WP-25 Owner's Manual
Specifications and Main Features
Frequently Asked Questions
User Manual
OM-225 425F2015−03
Processes
Descriptio n
Hand-Held Water-Cooled TIG
(GTAW) Torch
W-250 Series (WP-20 Series)
TIG (GTAW) Welding
W-250
W-250V
W-225
W-200
(WP-20)
(WP-20V)
(WP-20P)
(WP-25)
Visit our website at
www.MillerWelds.com
File: TIG (GTAW)
From Miller to You
Thank you and congratulations on choosing Miller. Now you can get the
job done and get it done right. We know you don’t have time to do it any
other way.
That’s why when Niels Miller first started building arc welders in 1929,
he made sure his products offered long-lasting value and superior quality.
Like you, his customers couldn’t afford anything less. Miller products had
to be more than the best they could be. They had to be the best you could
buy.
Today, the people that build and sell Miller products continue the
tradition. They’re just as committed to providing equipment and service
that meets the high standards of quality and value established in 1929.
This Owner’s Manual is designed to help you get the most out of your
Miller products. Please take time to read the Safety precautions. They will
help you protect yourself against potential hazards on the worksite. We’ve
made installation and operation quick and easy. With Miller you can
count on years of reliable service with proper maintenance. And if for
some reason the unit needs repair, there’s a Troubleshooting section that
will help you figure out what the problem is. The parts list will then help
you to decide which exact part you may need to fix the problem.
Warranty and service information for your particular model are also
provided.
Working as hard as you do
− every power source from
Miller is backed by the most
hassle-free warranty in the
business.
Miller Electric manufactures a full line of
welders and welding related equipment. For
information on other quality Miller products, contact your local Miller
distributor to receive the latest full line catalog or individual catalog sheets.
TABLE OF CONTENTS
SECTION 1 −SAFETY PRECAUTIONS FOR GT AW TORCHES − READ BEFORE USING1..............
1-1. Symbol Usage1........................................................................
FOR DC OR AC WELDING WITH INVERTER MACHINES13.........................................
6-1. Selecting Tungsten Electrode (Wear Clean Gloves To Prevent Contamination Of Tungsten)13.......
6-2. Preparing Tungsten Electrode For DC Electrode Negative (DCEN) Welding
Or AC Welding With Inverter Machines13...................................................
SECTION 7 − GUIDELINES FOR TIG WELDING (GTAW)14..........................................
SECTION 8 − PARTS LIST16.....................................................................
WARRANTY
SECTION 1 −SAFETY PRECAUTIONS FOR GTAW
r
-
.
n
-
-
el
’s
r
t
’s
l
TORCHES − READ BEFORE USING
SR6 (TIG) 2013-09
Protect yourself and others from injury —read, follow , and save these important safety precautions and operating instructions.
1-1.Symbol Usage
DANGER! − Indicates a hazardous situation which, if
not avoided, will result in death or serious injury. The
possible hazards are shown in the adjoining symbols
or explained in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained in the text.
NOTICE − Indicates statements not related to personal injury .
1-2.Arc Welding Hazards
The symbols shown below are used throughout this manual
to call attention to and identify possible hazards. When you
see the symbol, watch out, and follow the related instructions
to avoid the hazard. The safety information given below is
only a summary of the more complete safety information
found in the welding power source Owner’s Manual. Read
and follow all Safety Standards.
Only qualified persons should install, operate, maintain, and
repair this unit.
During operation, keep everybody, especially children, away.
ELECTRIC SHOCK can kill.
Always wear dry insulating gloves.
Insulate yourself from work and ground.
Before welding, verify torch head is firmly attached to the torch
body.
Do not wrap water-cooled torch hoses and power cables togethe
with tape or plastic wire ties. W rapping restricts water flow which
may cause power cable to overheat and torch hose to burst.
Replace worn, damaged, or cracked torches or cables.
Turn off welding power source before changing tungsten elec
trode or torch parts.
Keep all covers and handle securely in place.
Wear an approved welding helmet fitted with a proper shade of filter
lenses to protect your face and eyes from arc rays and sparks
when welding or watching (see ANSI Z49.1 and Z87.1 listed in
Safety Standards).
Wear approved safety glasses with side shields under your
helmet.
Use protective screens or barriers to protect others from flash,
glare and sparks; warn others not to watch the arc.
Wear body protection made from durable, flame-resistant material
(leather, heavy cotton, wool). Body protection includes oil-free
clothing such as leather gloves, heavy shirt, cuffless trousers, high
shoes, and a cap.
ventilation is t o sample for the composition and quantity of fumes
and gases to which personnel are exposed.
Read and understand the Safety Data Sheets (SDSs) and the
manufacturer’s instructions for adhesives, coatings, cleaners,
consumables, coolants, degreasers, fluxes, and metals.
Do not touch live electrode or electrical parts.
ARC RAYS can burn eyes and skin
Arc rays from the welding process produce intense
visible and invisible (ultraviolet and infrared) rays
that can burn eyes and skin. Sparks fly of f from the
weld.
FUMES AND GASES can be hazardous.
Keep your head out of the fumes.
Ventilate area, or use breathing device. The
recommended way to determine adequate
Indicates special instructions.
This group of symbols means Warning! Watch Out! ELECTRIC
SHOCK, MOVING P ARTS, and HOT PARTS hazards. Consult symbols and related instructions below for necessary actions to avoid the
hazards.
BUILDUP OF GAS can injure or kill.
Shut off compressed gas supply when not i
use.
Always ventilate confined spaces or use ap
proved air-supplied respirator.
WELDING can cause fire or explosion.
Do not weld near flammable material.
Do not weld on containers that have held com-
tanks, drums, or pipes unless they are properly prepared according to AWS F4.1 and AWS A6.0 (see Safety Standards).
Watch for fire; keep extinguisher nearby.
Read and understand the Safety Data Sheets (SDSs) and the
manufacturer’s instructions for adhesives, coatings, cleaners,
consumables, coolants, degreasers, fluxes, and metals.
Warn others nearby about noise hazard.
the beginning of the manual and in each section.
Use only genuine replacement parts from the manufacturer.
Perform maintenance and service according to the Owner
Manuals, industry standards, and national, state, and loca
codes.
bustibles, or on closed containers such as
HOT P ARTS can burn.
Allow torch to cool before touching.
Do not touch hot metal.
Protect hot metal from contact by others.
NOISE can damage hearing.
Check for noise level limits exceeding those spe
cified by OSHA.
Use approved ear plugs or ear muffs if noise lev
is high.
READ INSTRUCTIONS.
Read and follow all labels and the Owner
Manual c a r e f u lly before installing, operating, o
servicing unit. Read the safety information a
OM-225 425 Page 1
1-3.Proposition 65 Warnings
Welding or cutting equipment produces fumes or gases
which contain chemicals known to the State of California to
cause birth defects and, in some cases, cancer. (California
Health & Safety Code Section 25249.5 et seq.)
This product contains chemicals, including lead, known to
the state of California to cause cancer, birth defects, or other
reproductive harm. Wash hands after use.
1-4.Principal Safety Standards
Safety i n W elding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org o r purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www.global.ihs.com).
Safe Practice For Occupational And Educational Eye And Face Protection, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, website: www.ansi.org).
Safe Practices for the Preparation of Containers and Piping for W elding
and Cutting, American Welding Society Standard AWS F4.1, from Glob-
al Engineering Documents (phone: 1-877-413-5184, website: www.global.ihs.com).
Safe Practices for Welding and Cutting Containers that have Held Combustibles, American Welding Society Standard AWS A6.0, from Global
National Electrical Code, NFPA Standard 70, from National Fire Protection Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:
www.nfpa.org and w w w. sparky.org).
This product contains or produces a chemical known to the
State of California to cause cancer or birth defects (or other
reproductive harm). (California Health & Safety Code Section
25249.5 et seq.)
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 14501 George Carter Way, Suite
103, Chantilly, VA 20151 (phone: 703-788-2700, website:
www.cganet.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard
W117.2, from Canadian Standards Association, Standards Sales, 5060
Spectrum Way, Suite 100, Ontario, Canada L4W 5NS (phone:
800-463-6727, website: www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protection, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, website: www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot
Work, NFP A Standard 51B, from National Fire Protection Association,
Quincy, M A 0 2 2 6 9 ( p h o n e : 1 - 8 0 0 - 3 4 4 - 3 555, website : w w w.nfpa.org.
OSHA, Occupational Safety and Health Standards for General Indus-
try, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,
and Part 1926, Subpart J, from U.S. Government Printing Office, Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954
(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—
phone for Region 5, Chicago, is 312-353-2220, website:
www.osha.gov).
1-5.EMF Information
Electric current flowing through any conductor causes localized electric
and magnetic fields (EMF).The current from arc welding (and allied processes including spot welding, gouging, plasma arc cutting, and induction heating operations) creates an EMF field around the welding circuit.
EMF fields may interfere with some medical implants, e.g. pacemakers.
Protective measures for persons wearing medical implants have to be
taken. For example, restrict access for passers−by or conduct individual risk assessment for welders. All welders should use the following procedures in order to minimize exposure to EMF fields from the welding
circuit:
1. Keep cables close together by twisting or taping them, or using a
cable cover.
2. Do not place your body between welding cables. Arrange cables
to one side and away from the operator.
3. Do not coil or drape cables around your body.
4. Keep head and trunk as far away from the equipment in the
welding circuit as possible.
5. Connect work clamp to workpiece as close to the weld as
possible.
6. Do not work next to, sit or lean on the welding power source.
7. Do not weld whilst carrying the welding power source or wire
feeder.
About Implanted Medical Devices:
Implanted Medical Device wearers should consult their doctor and the
device manufacturer before performing or going near arc welding, spot
welding, gouging, plasma arc cutting, or induction heating operations.
If cleared by your doctor, then following the above procedures is recommended.
OM-225 425 Page 2
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT
e
s
s
le
UTILISATION
SR6(TIG)_2013−09fre
Pour écarter les risques de blessure pour vous−même et pour autrui — lire, appliquer et ranger en lieu sûr ces consignes relatives
aux précautions de sécurité et au mode opératoire.
2-1.Signification des symboles
DANGER! − Indique une situation dangereuse qui si on
l’évite pas peut donner la mort ou des blessures graves.
Les dangers possibles sont montrés par les symboles
joints ou sont expliqués dans le texte.
Indique une situation dangereuse qui si on l’évite pas
peut donner la mort ou des blessures graves. Les dangers possibles sont montrés par les symboles joints ou
sont expliqués dans le texte.
NOTE − Indique des déclarations pas en relation avec des blessurespersonnelles.
2-2.Dangers relatifs au soudage à l’arc
Les symboles présentés ci-après sont utilisés tout au long du
présent manuel pour attirer votre attention et identifier les risques de danger. Lorsque vous voyez un symbole, soyez vigilant et suivez les directives mentionnées afin d’éviter tout
danger. Les consignes de sécurité présentées ci-après ne
font que résumer l’information contenue dans les normes de
sécurité énumérées dans le manuel d’utilisation du poste de
soudage. Veuillez lire et respecter toutes ces normes de sécurité.
L’installation, l’utilisation, l’entretien et les réparations ne
doivent être confiés qu’à des personnes qualifiées.
Au cours de l’utilisation, tenir toute personne à l’écart et plus
particulièrement les enfants.
UN CHOC ÉLECTRIQUE peut tuer.
Porter toujours des gants secs et isolants.
S’isoler de la pièce et de la terre.
Ne jamais toucher une électrode ou des pièces
électriques sous tension.
Avant d e souder, vérifier que la tête de torche est solidement fixée
au corps de la torche.
Ne pas attacher ensemble des flexibles de torche à ref-
roidissement par eau et des câbles de puissance avec du ruban
adhésif o u des colliers plastique. Cela empêche le débit d’eau, ce
qui peut causer une surchauffe du câble de puissance et un
éclatement du flexible de la torche.
Remplacer une torche qui est usée, endomagée ou craquée
Réparer o u remplacer la torche ou la gaine d’isolement d’un câble
usée, endommagée ou fissurée.
Mettre l a soudeuse hors tension avant de remplacer un électrode
de tungstène ou des pièces de torche.
S’assurer que tous les couvercles et poignées sont fermement
assujettis.
Indique des instructions spécifiques.
Ce groupe de symboles veut dire Avertissement! Attention! DANGER
DE CHOC ELECTRIQUE, PIECES EN MOUVEMENT, et PIECES
CHAUDES. Consulter les symboles et les instructions ci-dessous y
afférant pour les actions nécessaires afin d’éviter le danger.
Porter des lunettes de sécurité avec écrans latéraux même sous
votre casque.
Avoir recours à des écrans protecteurs ou à des rideaux pour
protéger les autres contre les rayonnements les éblouissements
et les étincelles ; prévenir toute personne sur les lieux de ne pas
regarder l’arc.
Porter un équipement de protection pour le corps fait d’un matériau
résistant et ignifuge (cuir, coton robuste, laine). La protection du
corps comporte des vêtements sans huile comme par ex. des
gants de cuir, une chemise solide, des pantalons sans revers, des
chaussures hautes et une casquette.
LES VAPEURS ET LES FUMÉES
peuvent être nocives.
Éloigner sa tête des endroits renfermant des
vapeurs.
Aérer la zone de travail ou porter un appareil respiratoire. Pour
déterminer la bonne ventilation, il est recommandé de procéder à
un prélèvement pour la composition et la quantité de fumées et de
gaz auxquels est exposé le personnel.
Lire et comprendre les fiches de données de sécurité et les
instructions du fabricant concernant les adhésifs, les revêtements, les nettoyants, les consommables, les produits de refroidissement, les dégraisseurs, les flux et les métaux.
L’ACCUMULATION DE VAPEURS
peut causer des lésions ou la mort.
Après utilisation, fermer l’alimentation de gaz
sous pression.
Assurer toujours la ventilation des zones fer-
mées ou utiliser un appareil respiratoire avec
alimentation en air.
LE SOUDAGE peut causer un
incendie ou une explosion.
LES RAYONS DE L’ARC peuvent
provoquer des brûlures dans les
yeux et sur la peau.
Le rayonnement de l’arc du procédé de soudag
génère des rayons visibles et invisibles intense
(ultraviolets et infrarouges) susceptibles de provoquer des brûlure
dans les yeux et sur la peau. Des étincelles sont projetées pendant
soudage.
Porter un casque de soudage approuvé muni de verres filtrants
approprié pour protéger visage et yeux pendant le soudage
(voir ANSI Z49.1 et Z87.1 énuméré dans les normes de sécurité).
Ne pas souder à proximité de matériaux inflam-
mables.
Ne pas effectuer le soudage sur des conteneurs fermés tels que
des réservoirs, tambours, ou conduites, à moins qu ils n aient
été préparés correctement conformément à AWS F4.1 et AWS
A6.0 (voir les Normes de Sécurité).
Prendre garde aux incendies et toujours avoir un extincteur à
proximité.
Lire et comprendre les fiches de données de sécurité et les
instructions du fabricant concernant les adhésifs, les
revêtements, les nettoyants, les consommables, les produits de
refroidissement, les dégraisseurs, les flux et les métaux.
OM-225 425 Page 3
LES PIÈCES CHAUDES peuvent
provoquer des brûlures.
Laisser refroidir la torche avant de le toucher.
Ne pas toucher d’objets métalliques chauds.
Abriter les objets métalliques contre tout
contact par les personnes à proximité.
N’utiliser que les pièces de rechange recommandées par le
Effectuer l’entretien en respectant les manuels d’utilisation,
Le BRUIT peut endommager l’ouie.
Vérifier si les niveaux de bruit excèdent les li-
mites spécifiées par l’OSHA.
Utiliser des bouche-oreilles ou des serre-tête
antibruit approuvés si le niveau de bruit est
élevé.
Avertir les personnes à proximité au sujet du danger inhérent au
bruit.
2-3 .Proposition californienne 65 Avertissements
LIRE LES INSTRUCTIONS.
Lire et appliquer les instructions sur les
étiquettes et le Mode d’emploi avant
l’installation, l’utilisation ou l’entretien de
l’appareil. Lire les informations de sécurité au
début du manuel et dans chaque section.
constructeur.
les normes industrielles et les codes nationaux, d’état et locaux.
Les équipements de soudage et de coupage produisent des
fumées et des gaz qui contiennent des produits chimiques
dont l’État de Californie reconnaît qu’ils provoquent des
malformations congénitales et, dans certains cas, des
cancers. (Code de santé et de sécurité de Californie, chapitre
25249.5 et suivants)
Ce produit contient des éléments chimiques, dont le plomb,
reconnus par l’État de Californie pour leur caractère cancé-
2-4.Principales normes de sécurité
Safety i n W elding, Cutting, and Allied Processes, ANSI Standard Z49.1,
is available as a free download from the American Welding Society at
http://www.aws.org o r purchased from Global Engineering Documents
(phone: 1-877-413-5184, website: www.global.ihs.com).
Safe Practice For Occupational And Educational Eye And Face Protection, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, website: www.ansi.org).
Safe Practices for the Preparation of Containers and Piping for W elding
and Cutting, American Welding Society Standard AWS F4.1, from Glob-
al Engineering Documents (phone: 1-877-413-5184, website: www.global.ihs.com).
Safe Practices for Welding and Cutting Containers that have Held Combustibles, American Welding Society Standard AWS A6.0, from Global
National Electrical Code, NFPA Standard 70, from National Fire Protection Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:
www.nfpa.org and www. sparky .org).
rogène ainsi que provoquant des malformations congénitales ou autres problèmes de procréation. Se laver les mains
après tou t e m a n i p u l a t i o n .
Ce produit contient des substances chimiques (dont le
plomb) reconnues par l’État de la Californie comme pouvant
causer le cancer, des anomalies congénitales ou d’autres
préjudices au système reproductif.
Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,
from Compressed Gas Association, 14501 George Carter Way, Suite
103, Chantilly, VA 20151 (phone: 703-788-2700, website:
www.cganet.com).
Safety in Welding, Cutting, and Allied Processes, CSA Standard
W117.2, from Canadian Standards Association, Standards Sales, 5060
Spectrum Way, Suite 100, Ontario, Canada L4W 5NS (phone:
800-463-6727, website: www.csa-international.org).
Safe Practice For Occupational And Educational Eye And Face Protection, ANSI Standard Z87.1, from American National Standards Institute,
25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, website: www.ansi.org).
Standard for Fire Prevention During Welding, Cutting, and Other Hot
Work, NFP A Standard 51B, from National Fire Protection Association,
Quincy, M A 0 2 2 6 9 ( p h o n e : 1 - 8 0 0 - 3 4 4 - 3 555, website : w w w.nfpa.org.
OSHA, Occupational Safety and Health Standards for General Indus-
try, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,
and Part 1926, Subpart J, from U.S. Government Printing Office, Superintendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954
(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—
phone for Region 5, Chicago, is 312-353-2220, website:
www.osha.gov).
OM-225 425 Page 4
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.