Miller Electric Gyro Bail-15/25, Gyro Bail-15, Gyro Bail-25 Owner's Manual

OWNER’S MANUAL

Gyro Bail-15/25 (041 979)

WARNING

OM-714 147 531B

November 1998

ELECTRIC SHOCK can kill.

• Do not touch live electrical parts.

MOVING PARTS can cause injury.

• Keep away from pinch points.

• Turn Off spot welder and input disconnect device.

• Disconnect input power plug or conductors from

deenergized supply BEFORE moving spot welder.

Part

10

Item

8

No.

No.

1 601 926 Screw, 1/4-20 x 5/8 (4)
2 602 207 Washer, 1/4 lock (4)
3 147 530 Mounting Bracket LH (1)
4 147 529 Mounting Bracket RH (1)
5 147 527 Suspension Y oke (1)
6 110 510 Eye Bolt (1)
7 602 213 Washer, 3/8 split lock (5)
8 010 909 Nut, 3/8-16 (3)

9 601 871 Nut, 3/8-16 jam (7)
10 602 243 Washer, 3/8 flat (8)
11 142 156 Screw, 3/8-16 x 1-3/4 (2)
12 147 528 Gyro Bail Bracket (2)
13 601 965 Screw, 3/8-16 x 1 (5)
14 110 509 Ring (1)
15 024 665 Bearing (3)
16 602 221 Washer, 3/8 tooth lock (3)

Be sure to provide Model when ordering re­placement parts.

Adjust the pivot point or tilt angle of
the spot welder by loosening the two
self-locking nuts (8) and sliding the
spot welder along the gyro bail
brackets (12).

Description (Qty)

Tools Needed:

4

3

2

1

1

2

6

5

10

11

7

8

9

7

3/8, 9/16, 5/8 in

13

14

9

16

12

15

7

9

13

ST-147 722-A / ST-800 191

Figure 1. Gyro Bail-15/25 Assembly