Miller MFLEC2-4/6FT, MFLEC2-12/9FT, MFLEC2-12/6FT, MFLEC-4/9FT, MFLEC2-4/9FT User Manual
...
Miller® TurboLite™ Edge Personal Fall Limiter
When The Job Takes You to the Edge: Depend on Miller
Fall Protection
in Canada
Do You Know Where
Your Edges Are?
In work sites of every variety, edges are much
more common than people realize – and they
may pose a greater risk than you’d expect.
Whether you’re laying roofing, traversing a
beam, or simply working near the unprotected
sides of an upper floor, falls over an edge
are more hazardous than other falls.
Without protection designed for edges,
traditional lifelines risk being severed and the
force upon the worker in the event of a fall is
significantly increased. Honeywell estimates
that as many as 80% of fall-protection users
have applications in which a lifeline will come
in contact with an edge in the event of a fall.
Edges in Fall Protection
Applications
Sharp Edge Applications
≥ 0.005 in (0.13 mm)
Smooth Edge Applications
≥ 0.060 in (1.5 mm)
New Standards for Safety
As awareness of this threat grows, new safety
standards have been defined such as the stringent
ANSI Z359.142014 LE (Leading Edge), which
requires leading-edge protection to meet
criteria including:
• Edge radius as sharp as 0.005 in (0.13 mm)
• Safe for users connected at foot level
• Requires an integral shock-absorber
at the worker connection
Honeywell Has Your Back:
The Miller TurboLite™ Edge Series
Honeywell ’s extensive series of Miller TurboLite
Personal Fall Limiters (PFLs) is even more versatile
with the introduction of the TurboLite Edge Series.
Whether you work in construction, industrial, or
even wind power, units for sharp and smooth edges
will help you ensure workers are safe in applications
requiring foot-level tie-off or work near edges.
Make Confidence Your True Edge
TurboLite Edge PFLs are engineered to
deliver the assurance you expect from Miller,
and are available in a wide range of lengths
with innovative features:
Safe – Models are available for sharp and smooth
edges and include an integral shock absorber to keep
the lifeline intact in the event of a fall over an edge.
Versatile – Can be connected at foot-level and above
for workers up to 420 lbs.
Repairable – If one unit of a t win model is damaged,
the product can be sent into Honeywell for replacement.
Compact and Lightweight – Reduce your fatigue,
increase your productivity.
Simple – Easy to install, easy to use.
Configurable – A wide range of working
lengths featuring cable and web lifelines with
a variety of connectors.
Reduced fall clearance compared to a
shock-absorbing lanyard – Effective solution for
applications with limited fall clearance.
Durability – High-impact nylon housing and
abrasion-resistant webbing.
Superior Mobility – Integral swivel design increases
worker mobility and prevents lifeline from twisting.
What’s in It for Me?
• Provides you with protection designed
for sharp edges and smooth edges
eliminating the risk of your lifeline being
severed and reducing the force that
could result in the event of a fall.
• Keeps you safe in applications that
require anchoring at foot-level.
• Perfectly suits your personal
profile, with the capacity to support
user weights up to 420 lbs. in all
connections at foot-level and above.
• Cable Leading Edge units meet the
most stringent safety standards
including ANSI Z359.142014 LE.
Twin models available – Provide for 100%
tie-off connection.
The Versatility You Need.
The Safety You Depend On.
Designed for performance in edge
applications, TurboLite Edge PFLs offer
versatility, enhanced user mobility and
maximum safety.
Loading...