Miller MFLAF2-12/6FT, MFLAF2-3/6FT, MFLAFT-1/9FT, MFLAF-1/6FT, MFLAFB-1/6FT User Manual

Miller® TurboLite™ Flash Personal Fall Limiter

Fall Protection for Arc Flash and Hot Work Applications

A worker is injured from electrically­induced causes every 30 minutes –
mostly because of what is commonly
known as an arc flash hazard. Simply
put, an arc flash is a very large short
circuit that goes into the air.
It can happen with or without the
presence of a worker at any location
where electricity is present – including
utility lines and residential, industrial,
and commercial facilities.

A few root causes of this phenomenon
include the presence of old or rusting
equipment, the build-up of conductive
dust, tools being misplaced, improper
work procedures, or even a spider web
that becomes humid and moist.

WHY ARE THEY DANGEROUS?

The temperature of an arc flash can
reach 35,000 degrees Fahrenheit –
which is up to 4 times hotter than the
sun. This means workers in potential
arc flash environments need personal
protection equipment that can
withstand high heat without burning or
losing its function and form.

The byproducts of this explosive
condition include a broad spectrum
of electromagnetic energy, plasma,
fragments, and a spray of molten
materials. For workers on utility lines
or suspended welding and hot work
applications, working at height comes
with its own set of risks and therefore,
requires fall protection equipment
designed to withstand these hazards.

Do You Know How Common
Arc Flash Hazards Are?

THE MILLER TURBOLITE FLASH SERIES

FALL PROTECTION NOW COMES
IN YELLOW

Easy to Identify

• Commonly used in arc flash warning labels
and signs, the bright yellow color on the
housing helps differentiate the Flash series
from standard TurboLite products as well as
other traditional self-retracting lifelines.

Outstanding Versatility

• An all-in-one solution for arc flash and
hot work applications, available in single
or twin configurations and designed for
workers in bucket trucks and aerial lifts.

Reliability

• The durable Kevlar/Nomex webbing withstands
arc flash testing of 40 cal/cm² as well as weld
splatter and contact with high heat surfaces.

Designed specifically for those who work at height and

are exposed to arc flash hazards, welding, or who are

working near high heat areas, the Miller TurboLite Flash

Personal Fall Limiter of fers versatility, reliability, and

maximum safety. Engineered to deliver the assurance

you expect from Miller, our new TurboLite Flash Personal

Fall Limiters are available in a wide range of lengths and

configurations – including single or t win versions, tie-

back options, and even products specifically designed for

users working in bucket trucks.

VERSATILITY AND PROTECTION REACH
NEW HEIGHTS

• Provides you with enhanced versatility, for both arc flash and
hot work applications.

• Offers a comfortable work experience, while minimizing
fatigue and providing excellent user mobility.

• Keeps you safe while being as comfortable and lightweight as
possible.

• Meets the most stringent safety standards, including ANSI
Z359.14 and ASTM F887.

Integral Shock Absorber

• Provides protection where foot level tie-off
is required. Flame-resistant cover protects
the shock absorber and product labels.

HighImpact Resistant Housing

• Along with corrosion-resistant internal
components, the housing provides ultimate
durability, extending the product’s service
life and lowering the cost of ownership.

Great Mobility

• Swivel connectors allow for excellent
maneuverability in any working environment.

Efficient Tracking

• Ultra-high frequency RFID enables
efficient asset and inspection tracking.

When Hazards Happen
in a Flash, Rely on Miller.

MILLER TURBOLITE FLASH
COMPETITIVE ADVANTAGES

Provides an “all-in-one” solution

• Designed to protect workers in environments
with potential arc flash hazards as well as hot
work applications such as welding and areas
with extreme temperatures.

Provides protection for a wider range
of workers

• Rated for up to a 420-lb. (189 kg) weight
capacity for all connections down to foot level.

Enables quicker, easier installation

• Forget about connectors that are difficult to
operate. A single click and you can focus on the
task at hand.

• Keeps you safe by quickly arresting a fall to
minimize fall clearance.

• Increases safety by keeping tension on the
lifeline to reduce dragging and tripping hazards.

Maximizes versatility for arc flash and hot
work applications

• Includes various lengths, configurations, and
connector options to meet the needs of a
variety of fall protection applications, including
specific designs for tie-back applications as
well as bucket truck and aerial lift operations.

Miller TurboLite™ Flash Personal Fall Limiter

Bucket Truck Series

Specifically designed for users working in bucket trucks that often have

varying anchor point locations inside or outside of the bucket.

The web extension and short working length are the perfect combination

for ultimate mobility.

SKU Length Harness Connector Anchorage Connector

MFLAFB1/4.5FT

MFLAFB2/6FT

Aerial Lift Series

Designed for fall protection in aerial lifts.

SKU Length Harness Connector Anchorage Connector

MFLAFA11/4.5FT 4.5-ft.

MFLAFA18/4.5FT 4.5-ft. Aluminum Captive Eye Carabiner

4.5-ft.

6-ft. Kevlar Web Loop

Aluminum Captive
Eye Carabiner

Quick Connect
Harness Connector

Aluminum Locking Snap HookMFLAFB1/6FT 6-ft.

Aluminum Snap Hook

Standard Series

Designed for a variety of arc flash and hot work applications.

SKU Configuration Length

MFLAF1/6FT Single 6-ft.

MFLAF3/6FT Single 6-ft.

MFLAF4/6FT Single 6-ft. Steel Locking Rebar Hook

MFLAF5/6FT Single 6-ft. Steel Locking Swivel Snap Hook

MFLAF11/6FT Single 6-ft. Aluminum Locking Snap Hook

MFLAF12/6FT Single 6-ft. Aluminum Locking Rebar Hooks

MFLAF18/6FT Single 6-ft. Aluminum Captive Eye Carabiner

MFLAF23/6FT Twin 6-ft. Steel Locking Snap Hook

MFLAF24/6FT Twin 6-ft. Steel Locking Rebar Hooks

MFLAF25/6FT Twin 6-ft. Steel Locking Swivel Snap Hooks

MFLAF211/6FT Twin 6-ft. Aluminum Locking Snap Hooks

MFLAF212/6FT Twin 6-ft. Aluminum Locking Rebar Hooks

MFLAF218/6FT Twin 6-ft.

Harness
Connector

Steel Locking
Snap Hook

Quick Connect
Harness Connector

Harness One Pin
Connector

Anchorage Connector

Steel TwistLock Carabiner

Steel Locking Snap Hook

Aluminum Captive Eye Carabiners

TieBack Series

Designed for use as an anchorage connector and a personal fall limiter for

tie-back applications.

MFLAFB-1/6FT

MFL A FA-11/4.5FT

MF L A F 2-1 8/ 6 F T

SKU Configuration Length

MFLAFT1/9FT Single 9-ft. Quick Connect

MFLAFT21/9FT Twin 9-ft. Steel TieBack Snap Hooks (5K)

Harness
Connector

Harness
Connector

Anchorage Connector

Steel TieBack Snap Hook (5K)

MFLAFT2-1/9FT

Honeywell has your Back with
a complete safety solution for
arc-flash and hot work hazards.

Miller® Revolution™ ArcRated Harness

Featuring the same key features that have made the

Miller Revolution Harness the most comfortable and

versatile harness available, our ArcRated models

include QuickConnect Chest Buckles, ErgoArmor Back

Shield, Cam Buckles, Web Finials, and SelfContained

Label Pack. Additional custom safety features have

been incorporated for the security and protection of

utility and maintenance workers.

Designed with Kevlar®/Nomex® Miller DualTech™
webbing

The webbing offers the durability and FR properties of Kevlar

on the outer side, with softer FR Nomex on the inside for greater

comfort. It assures arc protection and durability, eclipsing any

nylon webbing.

Part Number Description

RKNARQC/UBK

RKNARRLQC/UBK

Want to explore the full line of Miller Revolution™ ArcRated Harnesses?

Please visit www.millerfallprotection.com

Includes QuickConnect Leg Buckles, Leather Insulators,
Kevlar web back D-ring

Includes QuickConnect Leg Buckles, Leather Insulators,
Kevlar web back D-ring, and Rescue Loops

Honeywell Salisbury®

We know that lives depend on the quality of our
products. For over 150 years, Salisbury has been
the name an entire industry trusts to provide
the finest safety products available. Honeywell
Salisbury® is your complete source for personal
electrical safety products that comply with NFPA
70e, ASTM requirements and OSHA regulations.

Honeywell Salisbury® Electriflex™

Electriflex™ minimizes hand fatigue and maximizes

performance - all while giving the protection you need.

Honeywell Salisbury® PrismShield™

The PrismShield provides full color recognition, making sure

your workers will set similarly-colored cables apart in every

occasion, and also increases general visibility.

To find out more about Salisbury by Honeywell

products, please visit

www.salisburybyhoneywell.com

Honeywell Safety Products

9680 Old Bailes Road

Fort Mill, SC 29707

Tel. [phone]

Fax. [phone]

www.honeywellsafety.com

© 2019 Honeywell International Inc.