Miles Lubricants MSF1438005 User Manual

MILES LUBRICANTS LLC

I n n o v a t i v e L u b r i c a n t E n g i n e e r i n g

Miles formulations are made from the nest quality of oils, all API approved.

To Our Valued Customers,

Back in 1937, a young man by the name of Jack Stern, started a new business selling lubricating oils, which in those years were

delivered in wooden barrels in horse drawn wagons. At the very beginning Jack dedicated Miles Lubricants to excellence in every phase of

business, quality products, competitive pricing and most important of all, “Customer Service.”

Today, almost a century after our “Founding” Miles Lubricants is a major supplier of lubricating oils, a wide selection of greases plus an extensive

selection of Industrial oils and Motor Oils. The quest goes on many years after our founding to achieve excellence in every aspect of our business

including highly competitive prices in order to insure our customers' higher prots. Our modern technical facilities and long relations with the

major suppliers allow us to give you the best service possible. Most important is that we have never lost our personal and hometown touch with

you. We are always available to you to answer any technical questions that may occur within your day to day business and to service your needs

in any way possible. I would like at this time to personally thank our many loyal customers and offer our grateful appreciation for your

patronage and trust in Miles Lubricants over the past many years. We at Miles look forward to serving you for another century with that same

personal touch.

Our Thanks to You Our Customers

Angela Stern

President

1

Miles formulations are made from the nest quality of oils, all API approved.

INDEX:

INTRODUCTION

PASSENGER CAR ENGINE OIL

HEAVY DUTY

HEAVY DUTY – SYNTHETIC

TRANSMISSION FLUID

GEAR OIL

GREASE

SPECIALTY GREASES

HYDRAULIC FLUIDS

ANTI WEAR HYDRAULIC FLUID

RUST & OXIDATION HYDRAULIC FLUID

SYNTHETIC HYDRAULIC FLUID

1

3

4

4

5

5

6

6

7-8

7

8

8

SYNTHETIC TURBINE OIL

INDUSTRIAL GEAL OIL

INHIBITED ELECTRICAL INSULATING OIL

METAL WORKING

SLIDEWAY OIL

CUTTING FLUIDS

MINERAL WATER SOLUBLE

SYNTHETIC WATER SOLUBLE

FOOD GRADE

FOOD GRADE COMPRESSOR CLEANER

FOOD GRADE GREASE

ENVIRONMENTALLY FRIENDLY

8

9

10

11-12-13-14

11

11

12

13-14

15-16

16

16

17

COMPRESSOR FLUIDS

COMPRESSOR CLEANERS

MILES LAB ANALYSIS

PACKAGING CONTAINERS AND SIZE

18-19

20

21

22

2

PASSENGER CAR ENGINE OIL

PRODUCT

Viscosity,

cSt @ 40 °C

Viscosity, cSt @

100 °C

Viscosity Index

Pour Point, °C

NOACK, Wt.(%)

Phosphorous, Wt.

(%)

Zinc. Wt.

(%)

Density

Viscosity,

CCS

cP @ -30°C

APPROVALS

MILESYN SB 5W20

47

8.5

150

-41

14.5

0.077

0.085

7.16

6200

API SN/GF-5

MILESYN SB 5W30

67

10.8

160

-41

14.5

0.077

0.085

7.17

6000

API SN/GF-5

MILESYN SB 10W30

68

10.5

145

-32

14.5

0.077

0.085

7.2

6000

API SN/GF-5

MILESYN SB 10W40

112

15.5

145

-35

14.5

0.077

0.085

7.25

6400

API SN/GF-5

PRODUCT

Viscosity, cSt @

40 °C

Viscosity,

cSt @ 100 °C

Viscosity Index

NOACK, Wt.(%)

High Temp./High Shear

Phosphorous, Wt. (%)

Zinc. Wt. (%)

APPROVALS

MILESYN SXR 0W20

43.5

8.3

170132.6

0.085

7.09

API SN/GF-5

MILESYN SXR 0W30

44

10.9

165

14.5

3.1

0.085

7.09

API SN/GF-5

MILESYN SXR 5W20

44

8.3

165

12.5

2.6

0.085

7.09

API SN/GF-5

MILESYN SXR 5W30

6211165113

0.085

7.1

API SN/GF-5

MILESYN SXR 10W30

5810155103.1

0.085

7.1

API SN/GF-5

MILESYN SB

SYNTHETIC BLEND GF- 5/SN PASSENGER CAR ENGINE OILS

are specially formulated using synthetic and Group II base oils and high performance additive packages to provide superior performance in gasoline fueled and ex-fueled engines.
These oils are formulated for excellent oxidation stability and low temperature properties to insure protection during cold starts. MILES PRIDE SYNTHETIC BLEND GF-5 engine oils
exceed the requirements of ILSAC GF-5 and are “Resource Conserving” for improved fuel economy.

PROPERTIES

MILESYN SXR

MILESYN SXR FULL SYNTHETIC GF-5/SN PASSENGER CAR ENGINE OILS are specially formulated using synthetic base oils and high performance additive packages to provide superior
performance benets to conventional engine oils. These oils are formulated for excellent oxidation stability, superior low temperature properties to insure protection during cold
starts, lower volatility for reduced oil consumption and excellent resistance to viscosity breakdown. MILESYN FULL SYNTHETIC GF-5 engine oils meet the most demanding lubrication
requirements of today’s naturally aspirated, turbo-charged and super-charged gasoline fueled and ex-fueled engines. These oils exceed the requirements of ILSAC GF-5 and are
“Resource Conserving” for improved fuel economy.

PROPERTIES

3

Miles formulations are made from the nest quality of oils, all API approved.

HEAVY DUTY

PRODUCT

Viscosity,
cSt @ 100

°C

Viscosity

, cSt @

40 °C

Viscosity

Index

Viscosity

CCS Cp

Density,

lb/gal

Color

Flash

Point,

0C

(COC)

Fire

Point, 0C

(COC)

Pour

Point,

0C

TBN

Four Ball

Wear Test

40 kg,

1.200 rpm.
75°C. 1

hour

Nitrog

en, Wt.

(%)

Phosphor

ous, Wt.

(%)

Sulfur,

Wt. (%)

Zinc.

Wt. (%)

Sulfated

Ash, wt%

Specic

Gravity

@ 60°F

MILESYN SB

15W40

15.35

119.2

135

6752

7.141

L4.5

232

246

-37

9.5

0.4

0.093

0.108

0.3765

0.12

0.985

-

MILESYN SXR

15W40

14.82

96.45

157

4529(-20)

7.141

L4.5

232

246

-37

11.28

0.4------

MILESYN SXR LA

15W40 - GEO

14.798158

3300

7.29

7.5

227--406--0.08-0.09

0.76

0.857

PRODUCT

Viscos

ity,

cSt @

40 °C

Viscos

ity,

cSt @

100

°C

Viscosity

Index

Viscosity, CCS

cP @ - 20°C

Calcium,

%wt.

Magnesiu

m, Wt. (%)

Nitrogen
, Wt. (%)

Phospho
rous, Wt.

(%)

Sulfur,

Wt. (%)

Zinc.

Wt. (%)

Sulfated

Ash, wt%

Total
Base

Number

Specic

Gravity

Denisty,

lbs/gal
@ 60°F

Flash
Point

(COC). °C

(°F)

ALL SPEC 15W40 CJ-4

117.6

15.23135

6752

0.2325

Nil

0.093

0.108

0.3765

0.12

0.938

8

0.8999--

GEO LA 15W40

114

15.2

137--

--0.08-0.08

0.7660.875

7.29

227(441)

15W40 PREMIUM CJ-4

MILES ALL SPEC 15W40 PREMIUM PLUS CJ-4 is a superior lubricant formulated to meet or exceed the warranty requirements of most manufacturers of diesel and gasoline engines.
Field tests have shown our CJ-4 oils retain TBN levels for longer periods due to the advanced additive chemistry. Designed for the modern high performance, low emission diesel
engines using ERG and Diesel particulate lters, this lubricant offers superior engine protection for heavy-duty diesel engines requiring the latest API CJ-4/SN specication.

GEO LA 15W40 - LAW ASH GAS ENGINE OIL - is a specially devised, high-quality oil for utilization in mobile gas engine oil (GEO) applications. Formulated with dispersant

detergency technology and higher levels of antiwear additives than conventional low-ash GEO’s, GEO LA 15W40 OIL is designed to meet the demanding wear protection
requirements of gas-conversion engines. Formulated to be suitable for use in buses, transit eets, trucks and other vehicles equipped with CNG or LPG engines, GEO LA 15W40 OIL GAS
ENGINE OIL provides outstanding .oxidization, nitration, wear, and rust and corrosion protection

PROPERTIES

HEAVY DUTY - SYNTHETIC

MILESYN SB 15W40 - is formulated with synthetic base stocks for superior anti-oxidation characteristics and enhanced high temperature stability to meet or exceed the

warranty requirements of all manufacturers of diesel and gasoline engines. This oil is formulated to meet the Mack EO-O Premium Plus ’07 specication and API CJ-4/SN specication
for use in EGR equipped heavy-duty diesel engines in high output service. MILESYN SYNTHETIC BLEND 15W40 meets the performance requirements of most diesel engine
manufacturers such as Caterpillar, Cummins, Detroit Diesel, Ford, Mack, Navistar, and Volvo. It can be used with complete success in over-the-road diesel trucks, off-highway diesel
equipment, farm tractors, and passenger cars and light trucks with diesel engines, turbo-charged or non turbo-charged and well as gasoline engines. Since the introduction of ultra
low sulfur fuels, high TBN oil is no longer a crucial need. Field tests have shown our CJ-4 oils retain TBN levels for longer periods due to the advanced technology of the new additive
chemistry.

MILESYN SXR 15W40 - is a synthetic 15W-40 motor oil for use in four-stroke diesel engines, both on and off road, and gasoline engines. It is designed to provide enhanced

performance over conventional petroleum oils with improved oxidation, heat, and sludge resistance.

MMILESYN SXR LA 15W40 - GEO - is a specially designed, superior quality, full synthetic lubricant for utilization in mobile gas engine oil (GEO) applications. Formulated with

full synthetic base stocks, dispersant detergency technology, and higher levels of antiwear additives than conventional low-ash GEO’s, MILESYN SXR LA 15W40 is designed to meet
the demanding wear protection requirements of gas-conversion engines. Formulated to be suitable for use in buses, transit eets, trucks and other vehicles equipped with CNG or
LPG engines, MILESYN SXR LA 15W40 provides outstanding oxidization, nitration, wear, and rust and corrosion protection.

PROPERTIES

4

TRANSMISSION FLUID

PRODUCT

Viscosity,

cSt @ 40 °C

Viscosity, cSt @

100 °C

Viscosity Index

Flash Point, °F

Pour Point, °F

Timken "OK"

Load Lb.

Copper

Corrosion, 24 Hr.

Sealed Tube

Stability

MIL-GEAR S 75W-90

11015142

510

-40501b

40/38/2

MIL-GEAR S 80W-140

260

33.2

173

515

-35401b

40/38/2

PRODUCT

Viscosity,

cSt @ 40

°C

Viscosity, cSt

@ 100 °C

Viscosity

Index

Gravity,

°API

Flash

Point. °F

Pour

Point. °F

Oxidation

stability (ASTM

D 2893)

Demulsibility

Total free

water, ml

Emulsio

n, ml

Rust Test

(ASTM
D665)

Copper strip

corrosion

(ASTM D130)

Foam test (ASTM D 892),

foam volume, ml

Sequences 1-3

80W-90

160

15.29828.5

415

-10

5.6

ASTM D2711

86.3

0.05

Pass1TR/0

85W-140

451.25

29.559827.5

46005.7

ASTM D2711

85.5

Nil

Pass1TR/0

PRODUCT

Density, @

15°C

Flash Point,

COC °C

Viscosity, Cst

@ 40 °C

Viscosity, Cst@

100°C

Viscosity Index

Viscosity, cP

@ -40 °C

Pour

Point, °C

Phosphoro

us, %wt.

Sulfu,.

Wt. (%)

Specic

Gravity

Brookeld@ -

40°C

TAN

Gravity, API

@ 60°F

ATF

-

177

36.5 cst

7.8 cst

190

-

-40

17.500 cp

1.2

31.4

MILESYN SB ATF

--34.81

7.5

175

-

-45

0.03

0.11

0.855--

-

MILESYN SXR ATF

0.844

191

29.8

5.98

152

11500

-50

0.0194----

-

ATF / DEX III - is a premium quality, multi-purpose automatic transmission uid specially formulated for new generation, electronically controlled transmissions. This uid may

also be used in previous transmissions built by General Motors, Chrysler, Ford (except where type “F” is required) and most foreign manufacturers. meets and exceeds the
requirements of DEXRON IIE, DEXRONII,DEXRON,DEXRON/MERCON and TYPE A suffix transmission uids. This uid is also formulated to exceed the performance
requirements of Allison Transmission Division
C-4, and various hydraulic manufactures’ antiwear hydraulic uid specications.

MILESYN SB ATF - is a superior quality synthetic blend suitable for use in most automatic transmission applications. It meets or exceeds many OEM passenger car, commercial

diesel, and off-road equipment specications and provides exceptional protection for all driving conditions. Formulated with the latest additive technology, Advantage Multi-Vehicle
Synthetic Blend ATF protects against wear, allows for smoother shifting with less shudder, and outperforms most other conventional and synthetic ATF uids.

MILESYN SXR ATF - is a specically designed, fully synthetic uid for use the latest generation of high tech transmissions. Formulated for use in a wide variety of applications,

MILESYN SXR ATF is suitable for use against GM's latest Dexron VI specication and is completely backward compatible for use in older GM vehicles that specify Dexron III H, Dexron IIIG,
Dexron I ID, Dexron II or Dexron uids. This uid has shown outstanding performance in friction durability, shear and oxidation stability and provides longer service life with superior
foam resistance, minimization of deposits and consistent shift performance. Not recommended for Type F, CVT or DCT transmissions; please consult the application chart for use
suitability.

PROPERTIES

GEAR OIL

SERIES AUTOMOTIVE GEAR OILS

MILES AUTOMOTIVE GEAR OILS are multipurpose, extreme pressure gear lubricants which are recommended for hypoid and bevel gear sets used in many front and rear drive

differentials. These gear oils are intended for ser vice ll, top-off and rell of hypoid and
other drive axles which recommend API GL-5 gear lubricants. Can be used as a top off in limited slip applications, but is not a limited slip capable product intended for ll or rell.
MILES AUTOMOTIVE GEAR OILS are suitable for use in manual transmissions where a GL-5 gear lubricant is recommended. Meet or exceed API GL-5, API MT-1, MIL-PRF-2105E, Ford
WSP-M2C197-A, Meritor Automotive 0-76-D, Navistar B-22, PG-2 (anticipated requirements) and Mack GO-J, depending on viscosity. Meets the latest SAE J-306 viscosity
requirements, as well as J-2360.

PROPERTIES

SERIES MIL-GEAR - AUTOMOTIVE SYNTHETIC GEAR OILS

MILES MIL-GEAR S is fully synthetic, PAO based, gear oils, designed for heavy-load and high-temperature applications and formulated with enhanced extreme-pressure (EP)

additives. Series MILES MIL-GEAR S provides excellent protection and a long uid life — even in the most demanding applications and environments. Excellent lubricity, Outstanding
carbon and varnish control, Very high lm strength, Excellent uid life, Excellent dispersant properties, Enhanced resistance against water contamination, Excellent protection
against wear, rust and corrosion, Reduced maintenance costs and downtime, Non-toxic/non-hazardous.

PROPERTIES

5

Miles formulations are made from the nest quality of oils, all API approved.

GREASE

PRODUCT

APPLICATIO

N

NLGI

GRADE

TEXTURE

SOAP TYPE

WORK

PENETRATION

RUST

RATING

VISCOSITY SUS

@ 40 C

TIMKEN

OK LOAD

DROPPING

POINT, F

COLOR

BASE STOCK

SUPER RED GREASE

HEAVY DUTY

2

SMOOTH

LITHIUM

265 - 295

PASS

451

70-80 LBS

350 +

RED

MINERAL OIL

MD LITHIUM

MULTI-PURPOSE

2

SMOOTH

LITHIUM

265 - 295

PASS

517

45 LBS

360 min

AMBER

MINERAL OIL

MOLY LITHIUM

AUTOMOTIVE

& INDUSTRIAL

2

SMOOTH

MOLY LITHIUM

265-295

PASS

441

450-500

BLACK

MINERAL OIL

PRODUCT

PENETRATION

60 Strokes

PENETRATION

10.000 Strokes

DROPPING POINT, F

RUST TEST

WATER WASHOUT, % LOSS @

EP SYN GREASE

268

275

550

PASS

<0.1

HT SILICA GREASE

415

425

NONE

PASS

<1

EP Bio Grease

270

277

550

PASS

0.2

SERIES MINERAL GREASES

MILES SERIES GREASES are formulated from high viscosity base oil and lithium complex thickener. It contains tackiness additive to enhance retention on lubricant parts. These

properties help form an effective seal to help minimize bearing contamination and stay in-place while in service.

PROPERTIES

SPECIALTY GREASES

MILES EP SYN GREASE

MILES EP SYN GREASE is an Aluminum Complex, very tacky, adhesive grease made to operate in wet environments. It is made with special water resistant additives

which give it water wash off properties that far exceed those of normal greases. This synergistic combination of additives and synthetic base uids provides exceptional performance
even in the most demanding applications.

Miles HT Silica Grease

MILES HT SILICA GREASE is specially formulated for high temperature wheel bearing applications. It is made with silica gel thickeners and specic synthetic base stocks and

additives which are capable of
providing exceptional service in severe applications. MILES HT SILICA GREASE meets H1 requirements for lubricants with incidental food contact and complies with FDA 21 CFR

178.3570.

Miles EP Bio Grease

Miles EP Bio Grease is a Calcium Sulfonate grease made with synthetic base stocks and a special proprietary additive system that includes waterproof thickeners and rust inhibitors.
It is specically designed for fresh and salt water applications, providing excellent thermal and oxidative resistance. Miles EP Bio Grease also resists water washout and decomposition
under wet conditions.

6

HYDRAULIC FLUIDS

PRODUCT

Operating Temp

Range °F

Viscosity cSt at

40°C Sus/100°F

Viscosity

index

Flash

Point, °F

Pour Point

,. °F

Oxidation

Stability

,. hours

Rust Test

A&B 48

hour

Pump Wear Test

Denison Vane, T-52

Vickers 35VQ25

Four Ball Wear.

scar diameter

mm

Water

Separability

129.2 °F

Water

Separability

129.2 °F

HYTEX - 32

12.2-145.4

32.0/150

99

429.8

-32.8

2500

PASS

PASS

0.5

40/40/0 (15)

PASS

HYTEX - 46

23-165.2

47.0/200

99

431.6

-27.4

2500

PASS

PASS

0.5

41/39/0 (10)

PASS

HYTEX - 68

32-183.2

68.4/300

93

438.8

-27.4

2500

PASS

PASS

0.4

40/40/0 (10)

PASS

PRODUCT

Viscosity cSt at 40°C

Sus/100°F

ISO

Viscosity

Flash Point, °F

Pour Point, °F

Oxidation

Stability,

hours

Rust Test

A&B 48 hour

Pump Wear Test

Denison Vane, T-

52 Vickers 35VQ25

Four Ball Wear,

scar diameter

mm

Water Separability

Heat Test

STRATUS ISO 22

22.0 / 100

104

399.2

-38.2

8000

PASS

PASS

0.5

40/40/0 (5)

PASS

STRATUS ISO 32

32.0/150

99

429.8

-32.8

8000

PASS

PASS

0.5

40/40/0 (15)

PASS

STRATUS ISO 46

47.0/200

99

431.6

-27.4

8000

PASS

PASS

0.5

41/39/0(10)

PASS

STRATUS ISO 68

68.4/300

93

438.8

-27.4

8000

PASS

PASS

0.4

40/40/0(10)

PASS

STRATUS ISO 100

94.6/500

100

467.6

-16.6

8000

PASS

PASS

0.4

179.6°F 40/39/1 (20)

PASS

STRATUS ISO 150

150.0/699

95

465158000

PASS

PASS

0.4

10

PASS

ANTI-WEAR

HYTEX SERIES - are high performance, anti-wear hydraulic oils designed for heavy-duty hydraulic systems operating over a wide range of temperatures. They produce excellent

results in a wide variety of high pressure hydraulic systems found on industrial machinery, ships, woodlands and mining operations, and other mobile equipment.
HYTEX AW Oils are an exclusive blend of exceptionally pure Hydro Treated base oils(Hydrocracking), and specially selected additives that deliver outstanding performance and
extended service life.
Compared to conventional hydraulic oils, HYTEX AW Oils offer: Outstanding, long term resistance to breakdown caused by air and high temperatures; Improved anti-wear protection
superior rust and corrosion prevention

PROPERTIES

STRATUS SERIES - Excellent performance, reinforced with extra package of additives that provide long life anti-wear hydraulic oils. It's designed for heavy-duty hydraulic

systems operating over a wide range of temperatures. Miles Stratus Series produce excellent results in a wide variety of high pressure hydraulic systems found on industrial
machinery, ships, woodlands and mining operations, and other mobile equipment.
Miles STRATUS AW Oils are an exclusive blend of exceptionally pure Hydro Treated base oils (Hydro- cracking), and specially selected additives that deliver outstanding performance
and extended service life.
Compared to conventional hydraulic oils, Miles STRATUS AW Oils offer: Outstanding, long term resistance to breakdown caused by air and high temperatures improved anti-wear
protection superior rust and corrosion prevention

PROPERTIES

7

Miles formulations are made from the nest quality of oils, all API approved.