Milesight MS-C2351-PMW, MS-C3651-P, MS-C2451-P, MS-C2451-PMW, MS-C3651-PMW User Manual

...
Version: V3.01
1
About this Document
This Manual explains how to use and manage Milesight network cameras on your network. Previous experience of networking will be of use when using the products. This manual applies to the following camera models, except where otherwise indicated.
Type
Megapixel
Model
Day/Night Box Camera
1.3MP
MS-C2651-P(MW) MS-C2351-P(MW) MS-C2451-P(MW)
2MP
MS-C3651-P(MW) MS-C3351-P(MW)
3MP
MS-C3656-P(MW) MS-C3356-P(MW)
5MP
MS-C3658-P(MW)
IR Bullet Camera
1.3MP
MS-C2661-(PM) MS-C2662-(PM) MS-C2361-(PM) MS-C2362-(PM)
2MP
MS-C3661-(PM) MS-C3662-(PM) MS-C3361-(PM) MS-C3362-(PM)
3MP
MS-C3366(PM)
Dome Camera
1.3MP
MS-C2671-P(M) MS-C2973-P(M) MS-C2471-P(M) MS-C2672-P(M) MS-C2372-P(M)
2MP
MS-C3671-P(M) MS-C3273-P(M) MS-C3672-P(M) MS-C3372-P(M)
3MP
MS-C3676-P(M) MS-C3376-P(M)
5MP
MS-C3678-P(M)
Please read this manual carefully before operation and retain it for future reference.
Copyright Statement
2
This manual may not be reproduced in any form or by any means to create any derivative such as translation, transformation, or adaptation without the prior written permission of Milesight Technology Co., Ltd (Hereinafter referred to as Milesight).
Milesight reserves the right to change this manual and the specifications without prior notice. The latest specifications and user documentation for all Milesight products are available on our official website www.milesight.com
Warnings Serious injury or death may be caused if any of these warnings are neglected. Cautions Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Please follow these safeguards to
prevent injury or death.
Cautions Please follow these precautions to prevent potential injury or material damage.
Warning
This installation must be conducted by a qualified service person and should strictly
comply with the electrical safety regulations of the local region
To avoid risk of fire and electric shock, do keep the product away from rain and moisture Do not touch components such as heat sinks, power regulators, and processors, which
may be hot
Source with DC 12V or PoE Please make sure the plug is firmly inserted into the power socket When the product is installed on a wall or ceiling, the device should be firmly fixed If the product does not work properly, please contact your dealer. Never attempt to
disassemble the camera yourself
Cautions
Make sure that the power supply voltage is correct before using the camera Do not store or install the device in extremely hot or cold temperatures, dusty or damp
locations, and do not expose it to high electromagnetic radiation
Only use components and parts recommended by manufacturer Do not drop the camera or subject it to physical shock To prevent heat accumulation, do not block air circulation around the camera Laser beams may damage image sensors. The surface of image sensors should not be
exposed to laser beam where a laser beam equipment is used
Use a blower to remove dust from the lens cover Use a soft, dry cloth to clean the surface of the camera. Stubborn stains can be removed
using a soft cloth dampened with a small quantity of detergent solution, then wipe dry
Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the
3
surface finishes
Save the package to ensure availability of shipping containers for future transportation
Environmental Protection
Please recycle this device in a responsible manner. Refer to local environmental regulations for proper recycling. Do not dispose of devices in unsorted municipal waste.
4
Table of Contents
Chapter I Product Description ......................................................................................................... 6
1.1 Product Overview ............................................................................................................... 6
1.2 Key Features ....................................................................................................................... 6
1.3 Hardware Overview ............................................................................................................ 7
1.4 Hardware Installation ....................................................................................................... 10
1.5 System Requirment .......................................................................................................... 14
Chapter II Network Connection ..................................................................................................... 15
2.1 Setting the camera over the LAN ...................................................................................... 15
2.1.1 Connect the camera to the PC directly .................................................................... 15
2.1.2 Connect via a Switch or a Router ............................................................................. 15
2.2 Setting the camera over the WAN ..................................................................................... 16
2.2.1 Static IP Connection ................................................................................................ 16
2.2.2 Dynamic IP Connection ........................................................................................... 16
Chapter III Accessing the Network Camera .................................................................................... 18
3.1 Assigning An IP Address .................................................................................................... 18
3.1.1 Assigning An IP Address Using IPCTools ................................................................... 18
3.1.2 Assign An IP Address Manually ................................................................................ 22
3.2 Accessing from the Web Browser ..................................................................................... 24
3.2.1 Access over IE Browser ............................................................................................ 25
3.2.2 Access over Firefox browser .................................................................................... 28
3.3 Accessing from MilesightVMS (Video Management Software) .......................................... 30
Chapter IV System Operation Guide .............................................................................................. 31
4.1 Live Video ......................................................................................................................... 31
4.2 Basic Settings .................................................................................................................... 32
4.2.1 Video ...................................................................................................................... 32
4.2.2 Image ...................................................................................................................... 34
4.2.3 Audio ...................................................................................................................... 36
4.2.4 Network .................................................................................................................. 36
4.2.5 Wi-Fi* ..................................................................................................................... 37
4.2.6 Date &Time ............................................................................................................. 38
4.3 Advanced Settings ............................................................................................................ 38
4.3.1 DDNS ...................................................................................................................... 38
4.3.2 SMTP ...................................................................................................................... 39
4.3.3 FTP .......................................................................................................................... 40
4.3.4 Alarm ...................................................................................................................... 40
4.3.5 Privacy Masking ...................................................................................................... 41
4.3.6 SD Card ................................................................................................................... 42
4.3.7 PTZ .......................................................................................................................... 43
4.3.8 User ........................................................................................................................ 43
4.3.9 Access List ............................................................................................................... 44
4.3.10 Logs ...................................................................................................................... 45
5
4.4 System .............................................................................................................................. 45
4.5 Maintenance .................................................................................................................... 46
Chapter V Services ........................................................................................................................ 48
6
Chapter I Product Description
1.1 Product Overview
Milesight provides a consistent range of cost-effective and reliable network cameras to fully meet your requirements. Based on embedded LINUX operating system, Milesight network cameras could be easily accessed and managed either locally or remotely with great reliability. With the TI DaVinci processor and built-in high-performance DSP video processing modules, the cameras pride on low power consumption and high stability. They support state-of-the-art H.264 video compression algorithm and industry-leading HD dual-stream technology to achieve the highest level of video image quality under the limited network resources. It is fully functional, supporting for flexible and comprehensive alarm linkage mechanism, day and night auto switch, smart PTZ control and privacy masking, etc.
In practical applications, Milesight network camera could either work independently in the local, or be networked to form a powerful safety monitoring system. It is widely used in fields such as finance, education, industrial, civil defense, health care for security’s sake.
1.2 Key Features
Based on LINUX OS with high reliability H.264/MPEG-4/MJPEG video compression capability G.711 u-law audio compression capability Support ONVIF, PSIA protocol Dual-stream Power over Ethernet Audio input/output, alarm input/output (built-in for box cameras, optional for bullet and
dome cameras)
IR cut filter with auto switch, true day/night Built-in WEB server, support IE browser(compatible with Firefox too) Real-time video electronic amplification Three-privilege levels of users for flexible management SD/SDHC card local storage support, expand the edge storage (applicable for box and
Dome cameras)
Local PAL/NTSC signal output Standard RS485 interface, multiple PTZ control protocol Motion detection, privacy masking, network fault detection and image snapping UPNP protocol for the easy management of IPC True Wide Dynamic Range (Optional feature according to the model selected)
1.3 Hardware Overview
1. Box Camera
Figure1-1
*Note:
1) Error LED: Error LED is on when the device starts up or runs error.
2) Reset Button: Press ‘Reset’ button for 5 seconds, the device will be restored to factory default.
3) The network camera provides a general I/O terminal block which is used to connect external
input/output devices. Please refer to the following instruction for the connection method.
*Error LED
Power LED
*Reset Button
Ethernet Port
BNC Video Out
Power Connector (DC12V)
Alarm Output
RS-485 PTZ control
Alarm Input
Antenna for WIFI (Optional)
Audio Input
SD/SDHC Card Slot
Audio Output
8
Figure1-2
2. Bullet Camera
Figure 1-3
IR LED
Light Sensor
LENs Power Connector (DC 12V)
Video Output
RS-485 PTZ control
Alarm Input/Output
Ethernet Port Audio Output
Audio Input
9
*Note:
1) The network camera provides a general I/O terminal block which is used to connect external
input/output devices. Please refer to the following instruction for the connection method.
Figure 1-4
3. Dome Camera
Figure 1- 5
Video Output
Power Connector (DC 12V)
Audio Output
Audio Input
RS-485 PTZ control
Alarm Input/Output
Ethernet Port
10
*Note:
1) The network camera provides a general I/O terminal block which is used to connect external
input/output devices. Please refer to the following instruction for the connection method.
Figure 1-6
1.4 Hardware Installation
1. Connect the camera to the network and power using one of the methods listed below:
1) Basic connection (without PoE):
Step 1: connect the DC 12V end of the power adapter to the power port of the camera and connect the other end to a wall outlet; Step 2: connect the camera to a switch using an Ethernet cable.
Figure 1-7 Box Camera
11
Figure 1-8 Bullet Camera
Figure 1-9 Dome Camera
2) Power over Ethernet (PoE) connection. PoE will be automatically detected when the Ethernet
cable is connected. The camera can either be connected to a PoE-enabled switch or a non-PoE switch.
A. Connect the camera to a PoE switch using a single Ethernet cable.
12
Figure 1-10 Box Camera
Figure 1-11 Bullet Camera
Figure 1-12 Dome Camera
B. Connect the camera to a non-PoE switch using the PoE injector
Step 1: Connect the camera to a PoE injector using an Ethernet cable. Step 2: Connect the PoE injector to the non-PoE switch using an Ethernet cable. Step 3: Connect the PoE injector to a power outlet.
13
Figure 1-13 Box Camera
Figure 1-14 Bullet Camera
Figure 1-15 Dome Camera
The power LED will light steady red when the camera is connected to a power source
2. Optionally connect external input/output devices, such as alarm devices.
3. Optionally connect an active speaker or external microphone.
4. Optionally connect the camera to a monitor using a BNC cable.
14
1.5 System Requirements
OS: Windows XP/7/Vista/Server 2000/Server 2008(Please use IE browser to operate) CPU: 1.66GHz or higher Memory: 1G MB or higher Graphic memory: 128MB or more Internet protocol: TCP/IP (IPv4)
Loading...
+ 34 hidden pages