Mile Marker carolina Installation Manual

Mile Marker™

Installation Guid

e 2015

Mile Marker™

With the rapid pace of today’s healthcare environments, a smart and

efficient workspace is essential. Mile Marker delivers

forward-thinking solutions for today’s hardworking healthcare spaces.

With its broad offering and smart design, Mile Marker provides

supportive solutions throughout facilities. Whether it’s for caregiver

work stations, patient rooms, exam spaces, family respite areas or

lab environments, Mile Marker adapts and supports specific needs.

Its high quality construction is dependable from the time of install

and throughout the life of the product. Mile Marker’s extensive

offering of material and options make it easy to specify for both

renovations and new construction projects.

Mile Marker – modular cabinetry and casework with the full facility in mind.

Throughout installation process a full team of support members are available at Carolina. For assistance contact your
Customer Service Representative at 800.763.0212 or visit www.carolinabusinessfurniture.com.

Mile Marker™

Base Cabinet, Filler Panels &

Work Surface

Clamp for Optional Filler Strips Screw Driver

Saw for Oversized Filler Strips & Tops 1/4” Bit for Screw Driver

Tape Measure Glue for Side Splashes

Level

Important Notice: Installers are responsible for selecting and supplying appropriate fasteners and must verify the
adequacy of the mounting hardware. Improper installation may cause damage or serious injury. Carolina cannot be
held liable for damage or injury caused by incorrect mounting, assembly or use. These instructions are only a
suggested installation method and the installers are responsible for following all local codes and regulations.

Mile Marker™

Installing Base Cabinet

3

1) Remove doors and drawers from cabinet. 2) Place cabinet in desired location level floor levels.

4

3) Drill pilot holes in back panel with 1/4” drill bit.

4) Install wall anchor (installers preference) using marks from pilot holes.

Mile Marker™

Installing Filler Panel

5

provided material

1 1/2” screw

5) Place cabinet in position and anchor to wall.

6) Measure the gap between the cabinet and wall for filler panel.

7) Aer obtaining measurements unattach the cabinet from the wall.

8) Cut filler panels to the correct size from (step 6).

10

OPTIONAL: Use hand clamp to secure filler while attaching.

9) Attach filler panels with 1 1/2” screws.

10) Place cabinet in position and anchor to wall.

Mile Marker™

Installing Work Surface

12

11) Measure for work surface

12) Attach (2) L-Brackets on back panel with 5/8” screws.

11

provided materials

5/8” 1 1/4”

13) Cut work surface to the correct size from (step 11).

16

15

14) Place work surface on cabinet.

15) Use 5/8” screws to attach work surface to L-Brackets.

16) Use 1 1/4” screws to attach work surface to front stretcher.