Milan Technology MIL-S801XX User Manual

User’s Manual
for MIL-S801XX

Regulatory Approval

- FCC Class A

- UL 1950

- CSA C22.2 Number 950

- EN60950

- CE

- EN55022 Class A

- EN55024

Canadian EMI Notice

This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.

Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur
du Canada.

European Notice

Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltag
Directive (73/23/EEC) issued by the commission of the European Community Compliance with these
directives implies conformity to the following European Norms:

- EN55022 (CISPR 22) - Radio Frequency Interference

- EN61000-X - Electromagnetic Immunity

- EN60950 (IEC950) - Product Safety

MiLAN Technology warrants to the original consumer or purchaser that each of it’s products, and
all components thereof, will be free from defects in material and/or workmanship for a period of
five years from the original factory shipment date. Any warranty hereunder is extended to the
original consumer or purchaser and is not assignable.

MiLAN Technology makes no express or implied warranties including, but not limited to, any
implied warranty of merchantability or fitness for a particular purpose, except as expressly set
forth in this warranty. In no event shall MiLAN Technology be liable for incidental or
consequential damages, costs, or expenses arising out of or in connection with the performance
of the product delivered hereunder. MiLAN Technology will in no case cover damages arising
out of the product being used in a negligent fashion or manner.

Trademarks

© 2000 MiLAN, the MiLAN logo and MiLAN Technology are either trademarks or registered
trademarks of Digi International, Inc. in the United States and/or other countries. All other
trademarks are the property of their respective holders.

To Contact MiLAN Technology

For prompt response when calling for service information, have the following information ready:

- Product serial number and revision

- Date of purchase

- Vendor or place of purchase

You can reach MiLAN Technology technical support at:

E-mail: [e-mail]
Telephone: [phone]
Fax: [phone]

Five-Year Limited Warranty

MiLAN Technology
1299 Orleans Drive
Sunnyvale, CA 94089-1138
United States of America

Telephone: [phone]
Fax: [phone]

http://www.milan.com
info @ milan.com

© Copyright 2000 MiLAN Technology P/N: 90000363_A

Contents

1. Introduction 1

Features 2
Package Contents 2

2. Hardware Description 4

Front Panel 4
MIL-S801XX 9 port switch with SC fiber port 4
MIL-S801XX 9 port switch with SC (Single-mode) fiber port 5
MIL-S801XX 9 port switch with ST fiber port 5
MIL-S801XX 9 port switch with MT-RJ fiber port 6
MIL-S801XX 9 port switch with VF-45 fiber port 7
Rear Panel 7
Desktop Installation 8

3. Network Application 10

Desktop Application 10
Segment Application 11

4. Trouble Shooting 10

Diagnosing LED Indicator 13
Power 13
Transmission Mode 14

5. Technical Specifications 15

1. Introduction

MiLAN’s MIL-S801XX switch with a fiber port is a compact desktop size
switch, which is an ideal solution for many network users. It provides
wire-speed, Fast Ethernet switching function that allows high­performance, low-cost connections.

Figure 1. The MIL-S801XX

The MIL-S801XX nine port switch provides 8 switched auto-sensing 10/100
Mbps RJ-45 Ethernet ports and one 100BASE-FX fiber port.

The switch combines both 10BASE-T and high-speed 100BASE-TX support
in one device. The switch automatically senses the speed of the connected
end device (either 10 or 100 Mbps) and transfers the data at the appropriate
speed. The MIL-S801 features store-and-forward switching for data and auto­learning of addresses which is stored in a 4,000 entry MAC address table.

The fiber connector on the switch has four different possible options: SC, ST,
VF-45 and MT-RJ. These connector options are all available in multi-mode
with a maximum distance of 2 Km. There is one connection option in single­mode. The SC connector provided by the fiber distance of 15Km, 40Km and
60Km.

Features

• Eight 10/100Mbps Fast Ethernet UTP switch ports

• One 100Mbps multi-mode port (SC, ST, MT-RJ, VF-45) or single-mode SC port

• One DIP-switch to select fiber port full-duplex or half-duplex mode

• Auto-negotiation for full or half duplex

• Store-and-forward switching architecture for packet filtering

• Full wire speed forwarding rate

• 4K-entry MAC address table

• 256KB memory buffer sharing

• LED-indicators for power, 100M, LK/ACT, FD/COL statuses

• Compact size

• Eight auto-sensing MDI/MDIX ports

Package Contents

• MIL-S801XX switch

• Power Cord

• Four Rubber Feet with adhesive pads

• User’s Manual

MIL-S801XX switch

Power Cord Rubber Feet User’s Manual

Figure 1-2. Package Contents

Compare the contents of your switch package with the standard checklist
above. If any item is missing or damaged, please contact your sales person.