Milan Technology MIL-S24002TGXX User Manual

MIL-S24002TGxx

24-port 10/100/1000 TX

2 Combo SFP Slots

Unmanaged Switch

User Guide

08-DEC2005

Rev.B

Regulatory Approval

- FCC Class A

- UL 1950

- CSA C22.2 No. 950

- EN60950

- CE

- EN55022 Class A

- EN55024

Canadian EMI Notice
This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.

Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur du
Canada.

European Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive
(73/23/EEC) issued by the Commission of the European Community Compliance with these directives imply
conformity to the following European Norms:

EN55022 (CISPR 22) - Radio Frequency Interference
EN61000-X - Electromagnetic Immunity
EN60950 (IEC950) - Product Safety

Five-Year Limited Warranty

MiLAN Technology warrants to the original consumer or purchaser that each of it's products,
and all components thereof, will be free from defects in material and/or workmanship for a
period of five years from the original factory shipment date. Any warranty hereunder is
extended to the original consumer or purchaser and is not assignable.
MiLAN Technology makes no express or implied warranties including, but not limited to, any
implied warranty of merchantability or fitness for a particular purpose, except as expressly set
forth in this warranty. In no event shall MiLAN Technology be liable for incidental or
consequential damages, costs, or expenses arising out of or in connection with the
performance of the product delivered hereunder. MiLAN Technology will in no case cover
damages arising out of the product being used in a negligent fashion or manner.

Trademarks

The MiLAN logo and MiLAN Technology trademarks are registered trademarks of MiLAN Technology in

the United States and/or other countries.

To Contact MiLAN Technology

For prompt response when calling for service information, have the following information ready:

- Product serial number and revision

- Date of purchase

- Vendor or place of purchase

You can reach MiLAN Technology technical support at:

E-mail: [e-mail]
Telephone: [phone]
Fax: [phone]
MiLAN Technology
1329 Moffett Park Drive
Sunnyvale, CA 94089
United States of America

Telephone: [phone]
Fax: [phone]

http://www.milan.com
[e-mail]

© Copyright 2004 MiLAN Technology

i

Content

1. Introduction ............................................................................. 1

Features.................................................................................... 1

Package Contents..................................................................... 2

2. Hardware Description.............................................................. 3

Front Panel ............................................................................... 3

Rear Panel ................................................................................ 3

LED Indicators .......................................................................... 4

3. Installation ............................................................................... 6

4. Network Application ................................................................ 7

5. Troubleshooting ...................................................................... 8

6. Technical Specification........................................................... 9

ii

1. Introduction

The 24-port 10/100/1000 TX plus 2 combo SFP Slots Switch is an ideal solution for solving

traffic block at the core of the network. It offers 24 x auto-negotiating 10/100/1000Base-T

Gigabit Ethernet ports that can significantly improve your network backbone performance.

This Switch will fit into any enterprise level network to act as an exit to the backbone switch.

It also provides 2 SFP Gigabit port for gigabit network connection.

The 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch features Auto MDI/MDIX

function for each port. [In general, MDI means connecting to another Hub or Switch while

MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX means that you

can connect to another Switch or workstation without changing non-crossover or crossover

cabling. The switch also features a store-and-forward switching and can auto-learn and

store source address on a 8K MAC address table.

Features

 Compatible with IEEE 802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3z

gigabit fiber and IEEE802.3ab 1000Base-T

 24 ports gigabit switch with two COMBO SFP SLOTS

 Automatic MDIX for all ports

 8K entry MAC address table

 9K Jumbo Frame support

 2Mbits Memory buffer

 IEEE802.3x flow control:

 Pause frame for 10/100/1000Mbps full duplex

 Backpressure for 10/100 Mbps half duplex

 2 COMBO SFP SLOTS for SFP transceiver

 Store-and-Forward architecture support

 One DC fan for good ventilation and to increase system heat sink performance

 19 inch Rack mount design

1

Package Contents

 The 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch

 Power Cord

 Four Rubber Feet

 User Manual

The 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch

Power Cord

User Guide

Figure 1-1. Package Contents

Rubber Feet

Compare the contents of your 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch

package with the standard checklist above. IF any item is missing or damaged, please

contact your local dealer for service.

2