MiLAN MIL-SM8002TG Quick Installation Manual

MIL-SM8002TG

9 Port 10/100/1000BASE-T

Two Combo 1000BASE-X SFP

Ports

Advanced Managed Switch

Quick Installation Guide

09-MAY2006

Rev.A

Content

Introduction............................................................................................................. 1

Package Contents .............................................................................................................1

Hardware Description............................................................................................. 2

Physical Dimension ...........................................................................................................2

Desktop Installation ...........................................................................................................2

Power On...........................................................................................................................2

Initial Setup ............................................................................................................. 3

Login in the Console Interface ...........................................................................................3

IP/Subnet/Gateway Setup .................................................................................................4

Introduction

The product is a multi-port switch that can be used to build high-performance switched

indoor or protected outdoor networks. It provides wire-speed, Gigabit Ethernet switching

function that allows high-performance, low-cost connection. The Switch features a

store-and-forward switching and it can automatically learn and store source address in an

8K-entry MAC address table.

Package Contents

Unpack the contents of the switch and verify them against the checklist below.

 Managed Switch unit

 Power Cord

 Four Rubber Feet

 RS-232 cable

 User Manual

If any item is missing or damaged, please contact your local dealer for service.

1