2.
1.
2.
3.
1.
2.
3.
4.
1.
~45mm
1.
2.
3.
5.
4.
1.
2.
3.
Part List
Wall: version 1
2x1x 2x 1x
1.
3.
1.
2.
4.
1. Drill two 4.5-5mm holes for anchors [1]. Insert
plastic anchors into the holes [2]. Attach the mount
[3] and secure the mount with screws [4].
Wall: version 2
2. Connect ethernet cable with product, then attach product to the mount.
2.
2.
3. When the product is attached on the mount, pull it down until it snaps
into place.
3.
1. Drill two 4.5-5mm holes for anchors [1]. Insert plastic
anchors into the holes [2]. Attach the mount [3] and
secure the mount with screws [4].
1.
2. Connect ethernet cable [1] with product, then attach product to the mount.
3. When the product is attached on the mount, pull it down until it snaps
into place.
Ceiling
1.
2.
3.
1. Drill two 4.5-5mm holes for anchors [1] and 8mm
hole for ethernet cable [2]. Attach sheet metal plate in
other side of ceilling panel [3], and with screws [5]
tighten together with mount part [4].
3. When the product is attached on the mount, push it in showing direction
until it snaps into place.
2. Insert ethernet cable [1] through sheet metal loop and drill hole. Connect cable
with product [2]. Attach on the mount [3].
cAP XL ac mounting instruction
All pictures shown are for illustration purpose only
Loading...