MikroTik CRS328-4C-20S-4S+RM User Manual

CRS328-4C-20S-4S+RM
CRS328-4C-20S-4S+RM
The CRS328-4C-20S-4S+RM is a 28 independent port switch with a combo group.
This device has twenty SFP ports, four SFP+ ports for 10G modules and four combo ports, where you can choose to use SFP or RJ45 ports from the combo group. These ports can also be software selected, so if you have plugged in all eight cables, you can use scripting, to decide which four combo ports will be active.
The device comes in a 1U rackmount case with two 100-240 V power supplies with failover functionality. A RJ45 console port is available for management and debugging, and a mode button can be customised to execute any RouterOS commands.
The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS.
If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with our disruptive price, providing best price/performance on the market.
Non-blocking Layer 2 switching capacity
16K host table
IEEE 802.1Q VLAN
Supports up to 4K simultaneous VLANs
Port isolation
Port security
Broadcast storm control
Port mirroring of ingress/egress trac
STP / RSTP / MSTP
Access Control List
MikroTik neighbor discovery
SNMP
10218-byte jumbo frames support
IGMP snooping
IEEE 802.3ad and static link aggregation
Quick specifications Switching features
20 SFP ports
4 ETH/SFP combo ports
4 SFP+ ports
Non-Blocking throughput: 64 Gbps
Switching capacity: 128 Gbps
Forwarding rate: 95.2 Mpps
RJ45 serial console port
Dual PSU
Maximum power consumption: 43 W
Temperature based fan control
1U rackmount
CRS328-4C-20S-4S+RM
1
Specifications
Product code CRS328-4C-20S-4S+RM
CPU 98DX3236A1 800 MHz
RAM 512 MB
Storage type Flash
Storage size 16 MB
Switch chip model 98DX3236A1
SFP cages 20
SFP+ cages 4
Ethernet/SFP Combo ports 4
Operating system SwOS / RouterOS (Dual boot)
CRS328-4C-20S-4S+RM
Supported input voltage 100 - 240 V
Dimensions 443 x 194 x 44 mm
Operating temperature -20°C .. +60°C tested
Max power consumption 43 W
Serial port RJ45
License level 5
Two IEC power
cords
Rack ears
CRS328-4C-20S-4S+RM
2
Loading...