MikroTik CRS328-24P-4S+RM User Manual

CRS328-24P-4S+RM
CRS328-24P-4S+RM
CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which oer dierent power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W with high voltage, and 26 W with low voltage power output.
Non-blocking Layer 2 switching capacity
16K host table
IEEE 802.1Q VLAN
Supports up to 4K simultaneous VLANs
Port isolation
Port security
Broadcast storm control
Port mirroring of ingress/egress trac
STP / RSTP / MSTP
Access Control List
MikroTik neighbor discovery
SNMP
10218-byte jumbo frames support
IGMP snooping
IEEE 802.3ad and static link aggregation
Quick specifications Switching features
24 Gigabit Ethernet ports
4 SFP+ ports
RJ45 serial console port
Non-Blocking throughput: 64 Gbps
Switching capacity: 128 Gbps
Forwarding rate: 95.2 Mpps
Maximum power consumption: 44 W (without PoE devices connected)
Supports PoE+ IEEE 802.3at/af and 26 V Passive PoE)
Temperature based fan control
1U rackmount
Selectable power output per port (26 / 53 V)
CRS328-24P-4S+RM
1
Specifications
Product code CRS328-24P-4S+RM
CPU ARM v7 800 MHz
RAM 512 MB
Storage type Flash
Storage size 16 MB
Switch chip model 98DX3236A1
10/100/1000 Ethernet ports 24
SFP+ cages 4
Operating system SwOS / RouterOS (Dual boot)
Supported input voltage 100 - 240 V
CRS328-24P-4S+RM
Dimensions 443 x 305 x 44 mm
Operating temperature -20°C .. +60°C tested
Max power consumption 44 W
Serial port RJ45
License level 5
IEC power cord Rack ears
CRS328-24P-4S+RM
2
Loading...