netPower 15FR
An outdoor 18 port switch with 15 reverse PoE ports and SFP
Cut costs, not speed – choose GPEN over GPON!
netPower 15FR
With netPower 15FR switch you can forget about expensive GPON base stations and optical splitters. This
switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while
using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to
individual apartments.
You don’t have to worry about power
options in the attic or the utility room –
netPower 15FR has 15 reverse PoE ports.
Depending on your setup, netPower can
draw the necessary power even from a
single client! Ethernet port 15 can power
other PoE capable devices with the same
voltage as applied to the unit.
netPower 15FR
– bringing the cost down and the speed up!
There are two SFP ports for fiber connectivity. The
outdoor enclosure allows you to install this switch
in all kinds of environments – from damp attics to
elevator shafts and dierent poles with hose clamps.
netPower 15FR
netPower 15FR has a non-blocking throughput of 3.6
Gbps, switching capacity of 7.2 Gbps and forwarding
rate of 5.4 Mpps.
2
netPower 15FR
Specifications
Product code CRS318-1Fi-15Fr-2S-OUT
CPU 98DX224S 800 MHz
Size of RAM 256 MB
Storage type Flash
Storage size 16 MB
Switch chip model 98DX224S
Number of 100 Mbps Ethernet ports 16
SFP ports 2
Operating system SwOS / RouterOS (Dual boot)
RouterOS license level 5
PoE-in Ports 1 - 14 and 16
PoE-out On Ether15
Supported input voltage 18 - 57 V (DC jack); 18 - 57 V (PoE-in)
Number of DC jacks 1 *
Dimensions 304 x 212 x 71 mm
Operating temperature -40°C to +70°C tested
Max power consumption 29 W
* power adapter not included
Included parts
Hose clamp 1 Hose clamp 2 K-66 fastening
netPower 15FR
set
DC to Terminal
block adapter
3
Loading...