MikroTik CRS317-1G-16S+RM User Manual
CRS317-1G-16S+RM
CRS317-1G-16S+RM
The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features, it
has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management.
CRS317-1G-16S+RM is powered by a next generation switching chip, giving you wire speed performance for
all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree
Protocol (MSTP) and Link Aggregation (LACP) provide enhanced protection and true professional performance
for your demanding network.
The unit has dual redundant power supplies and passive cooling case, so it’s completely silent - for hot
environments, like outdoor communications boxes, two redundant fans will automatically keep the system cool
if needed.
• Boot option for SwOS or RouterOS
• Non-blocking Layer 2 switching capacity
• 16K host table
• IEEE 802.1Q VLAN
• Supports up to 4K simultaneous VLANs
• Port isolation and Port security
• MSTP
• HW MPLS forwarding coming in future
software update
• SFP 1.25 and SFP+ 10Gbit module support
• 800 MHz dual core CPU
• Dual power supplies
“Dual boot” feature allows you to choose which operating system you prefer to use, RouterOS or SwOS. If
you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used
to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS,
boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the
RouterBOOT loader settings.
It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port
forwarding, apply MAC filter, configure VLANs, mirror trac, apply bandwidth limitation and even adjust some
MAC and IP header fields. SFP+ cages supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
• Broadcast storm control
• Port mirroring of ingress/egress trac
• Rapid Spanning Tree Protocol (RSTP)
• Link Aggregation (LACP)
• Access Control List
• MikroTik neighbour discovery
• SNMP v2/v3
• Rackmount and tabletop
• Supports -20 to +60 C ambient temperatures
• Passive cooling with automatic fan for high
temperatures
CRS317-1G-16S+RM
2x IEC cord Rackmount ears
1
Specifications
Product code CRS317-1G-16S+RM
CPU 98DX8216B0 800 MHz
CPU cores 2
Size of RAM 1 GB
Storage type Flash
Storage size 16 MB
CRS317-1G-16S+RM
SFP+
Dimensions 443 x 224 x 44 mm
License level 6
Operating System RouterOS or SwitchOS
Number of AC inputs 2
AC input range 110 - 240 V
Redundant supply Yes
Max Power consumption 42 W
Active case cooling Ye s
CPU temperature monitor Ye s
Operating temperature -40 to 70° C
LEDs 38
Serial port RJ45
Suggested price $399
16 (supports both 1.25 Gb SFP and 10 Gb SFP+ modules; modules are not
included), DDMI support
Ethernet test results
CRS317-1G-16S+RM 98DX8216B0 all port test
1518 byte 512 byte 64 byte
Mode Configuration
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 268.3 3258.2 361.2 1479.5 355.2 181.9
Bridging 25 bridge filter rules 98.4 1195.0 98.6 403.9 98 50.2
Routing none (fast path) 254.4 3089.4 309.8 1268.9 315.4 161.5
Routing 25 simple queues 104.6 1270.3 104.4 427.6 104.6 53.6
Routing 25 ip filter rules 104.6 1270.3 103.4 423.5 103.9 53.2
CRS317-1G-16S+RM
2
Loading...