MikroTik CCR2004-1G-12S+2XS User Manual

CCR2004-1G-12S+2XS

Cloud Core Router 2004-1G-12S+2XS

TheCCR2004 is a high-performance multicore router with twelve 10G SFP+ ports and two 25G SFP28 ports.

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
Failure to use the correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
Read the installation instructions before connecting the system to the power source.

Quick start

Connect from your computer to the device ;https://mt.lv/first
Use the WinBox tool to connect using MAC address ;https://mt.lv/winbox
Upgrade the device to the latest version ;https://mt.lv/upgrade

Powering

The device has dual integrated power supply units AC 110-240V (5 A) with standard IEC compatible sockets with Maximum power consumption of 32 W,
with attachments 49 W.

Configuration

The Ethernet port 1 has a default IP address for connecting: 192.168.88.1. Username is admin and there is no password. The device doesn't have any
other configuration applied by default, please set up WAN IP addresses, user password, and update the device. RouterOS includes many configuration
options in addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: . In case http://mt.lv/help
the IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address of the device from the LAN sidehttp://mt.lv/winbox
For recovery purposes, it is possible to boot the device for reinstallation, see a section Reset button.

Reset button

The reset button has two functions:

Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration.
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers.

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.

Mounting

1.

2.

3.

The device is designed to use indoors and it can be mounted in a rackmount enclosure using provided rack mounts, or it can be placed on the desktop.
Use a Phillips screwdriver to attach rackmount ears on both sides of the device if designated use is for rackmount enclosure:

Attach rack ears to both sides of the device and tighten four screws to secure them in place, as shown on the picture to the right;
Place the device in rackmount enclosure and align with the holes so that the device fits conveniently;
Tighten screws to secure it in place.

The device has no protection from water contamination, please ensure the placement of the device in a dry and ventilated environment. We recommend
Cat6 cables for our devices.

Included Parts

Operating System Support

The device supports RouterOS software with the version number v6.46 at or above what is indicated in the RouterOS menu /system resource. Other
operating systems have not been tested.

CE Declaration of Conformity

Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.

BG

С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС. Цялостният
текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес:

https://mikrotik.com/products