Miki Pulley PSL-K, PSL-K-B, PSL-K-C, PSL-K-F Instruction Manual

TRS-PSK-003-01/MD-000074185A

Inner sleeve

Detaching screw hole

Clamping bolt

Outer sleeve

POSI LOCK

PSL-K/PSL-K-B/PSL-K-C/PSL-K-F

Instruction Manual

This manual is common to standard, hexagon head bolt type, basic antirust type, and stainless

steel type.

Before use this product, read the instruction manual carefully and use the product safety and correctly.

1. Before using……………………………………………………………………P1

2. Safety Precaution…………………………………………………………..P2

3. Installation procedure …………………………………………………..P4

4. Removal …………………………………………………………………………P6

5. Other notes ……………………………………………………………………P6

1.Before using

1-1After opening the package

First, please check the following points.

1) Is the product what you ordered?

2) Is the product damaged during transportation?

If any problems are found, please contact your supplier.

1-2 Structure and parts

The main part consists of three parts. “Outer sleeve / Inner sleeve / Clamping bolt’’

－1－

1-3 Part quality of the material

DANGER

When death or serious injury may
result by mishandling

CAUTION

When disability or only physical
damage may result by mishandling

Structural precautions

Touching the product during operation could cause injury. Place a safety
cover to avoid any accident. Additionally, set up a safety mechanism for
quick stop of the product when opening the cover.

Do not use the product near flammable liquids or in the presence of gas
and other explosive air particles.

DANGER

PSL-K: Standard

Sleeve: equivalent of S45C thermal refining

Clamping bolt: SCM435, Black oxide finish

PSL-K-B: Hexagon bolt type

Sleeve: equivalent of S45C thermal refining

Clamping bolt: SCM435, Black oxide finish

PSL-K-C: Basic antirust type

Sleeve: equivalent of S45C thermal refining, Electro less nickel plating

Clamping bolt: SCM435, GEOMET treatment

PSL-K-F: Stainless Steel type

Sleeve: SUS 304

Clamping bolt: SUH660, Solid lubricant film treatment

2.Safety Precautions

Please read carefully through the instruction manual and the technical information for
proper use and safety. In this manual, safety precautions are classified by "DANGER" and
"CAUTION".

Equipment use (atomic energy, aerospace, medical treatment, transportation, or various
safety devices) that may result in serious bodily injury or loss of life directly by mechanical
failure or mishandling, careful examination is necessary. Contact us for further information.
The company has taken all possible measures to produce a quality product; however,
continuous rotational states when the clutch can not be disengaged or coasting of the
machine when the brakes went off is envisioned as emergency. Please pay attention to
safety measures in case anything goes wrong.

－2－