MIK MIKrovent Professional 120, MIKrovent Office 60, MIKrovent User Manual

1

MIK Mednarodno trgovsko in proizvodno podjetje, d. o. o. Celjska cesta 55,
3212 Vojnik, Sloveniaa, EU

Instructions for use

MIKrovent® Office 60

MIKrovent® Professional

120

GB

2

English

Instructions for use

Version 2, 23. 10. 2018

LOCAL VENTILATION SYSTEM MIKROVENT®
WITH HEAT EXCHANGER

Read these instructions carefully

Read these instructions carefully before using the ventilation device for the first time and save
them for future reference. In them you will find many useful tips on the correct use and
maintenance of the ventilation device. A little bit of preventative care from your side can bring
you great savings in time and money throughout the entire lifespan.

3

Dear user!

Thank you for purchasing the MIKrovent® ventilation system

and congratulations on the excellent choice.

You have bought a quality product that will allow you controlled
and high-quality ventilation of rooms with minimal heat losses.
Fresh air is one of the key factors of healthy living. Your

MIKrovent® will improve the living conditions and quality of

living, and thus help you to improve your well-being.
We guarantee smooth operation, when considering the
instructions for use. Instructions are attached, we ask you to
read them before you start using them.

We wish you well-being with MIKrovent.
MIK, d. o. o.

4

WARNINGS

Do not twist the cable on sharp edges and do

not break it!

The device should not come into contact with

chemicals!

Do not place near the heat source!

Do not spill wit the water!

Do not insert foreign objects into the device!

Do not use cable extensions to connect the

device to the mains power supply!

Keep out of reach of children!

Do not repair the device yourself!

Do not use a damaged cable!

5

WARRANTY MIKrovent®

For smooth and proper operation of MIKrovent® local ventilation system, we recommend

regular annual service inspections. In the event of a problem or failure of the device, we are

available on the telephone number [phone] or via the online form at www.mik-ce.si.

MIKrovent® is an innovative local ventilation system that allows ventilation of the room by

exchanging air through the heat exchanger. It is suitable for ventilating residential and

commercial buildings.

Before any work on the device, connection, start-up, use or maintenance, the person who

will carry out the listed activities must read the corresponded instructions and

recommendations for connection.

Before installing the device, the protective film must be removed from the device.

MIKrovent contains two filters: the PM 2.5 filter (F7) prevents insects, dust and dirt from

entering the room, while the filter marked with PM 10 (G4) serves to filter the indoor air. The

internal filter can be washed and used repeatedly, whereas the outside air filter must be changed

regularly, depending on the ambient air pollution, but at least once a year.

Quality is guaranteed with quality certificates, certificates of use safety,
ecological certificates and technical and technological standards of the
European Union, which show the safety of product use. All MIKrovent
devices have a CE certificate.

MIKrovent 30 / 60 / 120

The seller reserves the right to errata and other errors, as well as changes in prices and technical data without prior notice.

When asserting warranty service, the following conditions must be met:

• a regular annual service,

and accompanied by the following documents:

• certificate of professional assembly of authorized repairer and

• warranty or purchase order completed and validated.

6

GENERAL SAFETY INSTRUCTIONS

Read these instructions for your safety before using your device. People who are not familiar with

these instructions should not use the device. Keep the instructions for future reference.

The device is safe. Nevertheless, use it as carefully as

other electrical devices.

Attention! Misuse of the device may result in serious
injuries and / or even death.

Use only the required nominal voltage (Technical
characteristics, page 8). Otherwise there is a risk of fire
or damage to the device.
The device can only be connected and started by a
qualified professional.
A professional must ensure that the contacts in the
terminals do not come into contact with dirt, as there
may be a short circuit and a fire. The connection must be
carried out professionally, and the wires firmly inserted
into the terminals, otherwise it may lead to poor contact
and consequently to fire.

Do not remove the power cord during operation, as the
spark may cause a fire.
Do not knot, compress or pull the electric flex from the
device, as the cable can be damaged and cause a shock

and/or fire.

If the power supply cable is damaged, it must be replaced

by the manufacturer, its service technician or suitably

trained person.

Do not include the device if you are using dangerous or
allergenic substances nearby (e.g. insecticides or
pesticides, ...). You can endanger the health of people who
are allergic to certain chemical substances.

It is recommended to allow air circulation throughout the
room with the appropriate setting of the blowing nozzles.

Keep the air flow away from gas burners, etc.

Do not repair the device yourself! If it is repaired in an
incorrect way, an electric shock may result, and
consequently a malfunction of the device or devices /
products in its surroundings.

Do not cover the suction grids and the blow nozzles.

If you do not use the appliance for a long time, disconnect it
from the electrical installation for increased safety.

It is forbidden to use any fuse replacement (e.g. wire) as it
might cause damage to the device or fire.

Turn off and unplug the appliance before cleaning the
device. When the device is on and working, it must never be
cleaned. Do not clean the appliance on the outside with
water, you can only clean it with a slightly moist cloth.

If there are unusual occurences such as the burning odour,
turn off the appliance immediately and disconnect it from
the electrical installation and consult a repairman. Failure to
do so may result in damage to the device, electric shock or
fire.

The ventilation device is not a toy. Make sure it is out of the
reach of children.

Children over 8 years of age, people with reduced psycho­physical abilities, as well as persons with a lack of know-how
and technical experience may use the device only if they are
under the supervision of adults / responsible persons or are
properly educated about the use of the device and
understand the safety instructions.

Power supply: the device must be connected to a standard
230 V / 50 Hz grounded electrical socket. Installation must
be done in accordance with the regulations of the country
where the device will be in use.

Never connect the appliance to the mains with an electric
extension cable. If no electrical socket is available nearby, a
qualified electrician should install it.